Skip to the content
2 layers59.7 × 43.2 mmProductopad, the printed circuit board in 3D

My macropad for productivity, allowing to open and close apps at the click of buttons

Size
59.7 × 43.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
15
Pads
56
Tracks, vias
65, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
18 Dec 2025
Updated
25 Dec 2025

Overview

Productopad is an open-source printed circuit board by M4SK29, from the M4SK29/Productopad repository on GitHub. It is a 2-layer board of 59.7 × 43.2 mm with 7 parts on 15 nets, routed with 65 tracks and 0 vias.

It is built around the SK6812MINI-E. Its parts include 4 switches, 1 IC, 1 diode and 1 connector. It belongs with the keyboards and input boards and the RP2040 boards of this library.

Main components

1

README

README.md

Productopad

My macropad for productivity, allowing to open and close apps at the click of buttons!

Notes

  1. I'll not be attaching the 4 pin headers themselves to the pcb but will use their holes and solder my cables to them to make it easier.
  2. The platform sorta thing you see on the design is the place for the 0.91 inch oled. tightly fitted, yes and I won't be putting headers on that either I'll just solder the cables to the holes.
  3. To fix the screen to the platform I'll probably just hotglue it. It's convenient and can be removed when needed then.
  4. Yes the code is written by ChatGPT, so I'll probably have to edit it and make it work when I receive the parts.

Hackpad

image

Schematic

image

PCB

image

Case and it's parts

image

This is the base of it and

image this is the top

I will connect the cables for the OLED screen and glue it to the sort of platform I've made. It will be a tight fit so I may even not need to use the glue. The top will then be put on with nut and bolts or whatever they provide in the kit for it. That's pretty much it for putting the things in the case and like I said I'll be soldering the cables for the display and not use the headers(4 pin ones)

Fitting

PCB in base: image

top on base: image

Fitting the OLED Display:

The OLED display will be put right here(in the following image) where I've cut a place for it to be there(exact dimensions) image

After that I also have made some space for the jumper cables that I'll be soldering to it, here- image

List of parts needed-

(the number in brackets is the needed quantity)

  1. Seeed XIAO RP2040(1)
  2. Blank DSA keycaps(4)
  3. SK6812 MINI-E LED(1)
  4. 0.91 inch OLED display(1)
  5. MX-Style switches(4)
  6. M3x16mm screws(6)
  7. 3D Printed case(I don't have a 3D printer)
  8. Jumper cables(4 male to male)(or I'll get that by myself from somewhere cuz it wasnt there in the list of approved parts)

Parts

7
QtyValueFootprintReferences
4SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1SK6812MINILED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmD1
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

Similar boards

  • 4 layers234 × 84 mmMain panel, the printed circuit board in 3D

    Main panel

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    234 parts3kApache-2.0
  • 4 layers180.8 × 300.3 mmDilemma, the printed circuit board in 3D

    Dilemma

    Bastardkb/Dilemma

    The Dilemma is a vertical stagger low-profile keyboard with mods.

    383 parts590
  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 2 layersDemo, the printed circuit board in 3D

    Demo

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    48 parts547GPL-3.0
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    62 parts517GPL-2.0
  • 4 layers82.5 × 39.4 mmV4head, the printed circuit board in 3D

    V4head

    makerforgetech/modular-biped

    An open source framework for creating a bipedal modular companion robot.

    26 parts493GPL-3.0
  • 2 layers115.7 × 95.7 mmFifi split keeb, the printed circuit board in 3D

    Fifi split keeb

    raychengy/fifi_split_keeb

    Fifi Keyboard 🐶 ⌨️

    66 parts334
  • 4 layers70 × 54 mmPicoLab, the printed circuit board in 3D

    PicoLab

    CoretechR/PicoLab

    Web-GUI Embedded Multitool

    285 parts327GPL-3.0

Questions

How big is the Productopad PCB?

It measures 59.7 × 43.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Productopad use?

7 parts, built around the SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Productopad KiCad files?

From the M4SK29/Productopad repository on GitHub, at the commit this page was made from: the board is PCB/Productopad.kicad_pcb and its schematic PCB/Productopad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Productopad design in my own project?

Its repository states no licence, so its author keeps all rights: ask M4SK29 before reusing the design.