Skip to the content
4 layers48 × 19.9 mmTransmisor, the printed circuit board in 3D

Experiments with STM32 MCUs

Size
48 × 19.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
46
Nets
51
Pads
195
Tracks, vias
454, 87
Pours
6
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
25 Sep 2019
Updated
4 Jul 2026

Overview

Transmisor is an open-source printed circuit board by m-turambar, from the m-turambar/Glamdring repository on GitHub. It is a 4-layer board of 48 × 19.9 mm with 46 parts on 51 nets, routed with 454 tracks and 87 vias.

It is built around the CH330N, NRF24L01P-R and MPU-6050, with the USBLC6-2SC6 among its other parts. Its parts include 21 capacitors, 7 resistors, 6 ICs, 4 connectors and 3 inductors. It belongs with the STM32 boards of this library.

Main components

4

README

README.md

Glamdring

Infraestructura para microcontroladores STM32. Desarrollo de hardware: STM32G031

El proyecto en usa una capa de abstracción del hardware (HAL) original.

Periféricos:

  • MPU6050
  • NRF24

Desarrollo de hardware para:

  • STM32G031

El proyecto Glamdring es un éxito.


Dependencias:


https://www.youtube.com/watch?v=ew0XWd-blwE&t=2509s

Parts

46
QtyValueFootprintReferences
7100nFCapacitor_SMD:C_0402_1005MetricC11, C12, C14, C16, C18, C19, C21
52.2kResistor_SMD:R_0402_1005MetricR3, R4, R6, R7, R8
210nFCapacitor_SMD:C_0402_1005MetricC1, C17
22.2nFCapacitor_SMD:C_0402_1005MetricC5, C20
222pFCapacitor_SMD:C_0402_1005MetricC4, C6
11.0pFCapacitor_SMD:C_0402_1005MetricC9
11.5pFCapacitor_SMD:C_0402_1005MetricC8
110uFCapacitor_SMD:C_0603_1608MetricC10
116 MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
11MResistor_SMD:R_0402_1005MetricR2
11nFCapacitor_SMD:C_0402_1005MetricC2
11uFCapacitor_SMD:C_0603_1608MetricC15
12.7nHInductor_SMD:L_0402_1005MetricL3
122kResistor_SMD:R_0402_1005MetricR1
13.9nHInductor_SMD:L_0402_1005MetricL2
133nFCapacitor_SMD:C_0402_1005MetricC3
14.7pFCapacitor_SMD:C_0402_1005MetricC7
14.7uFCapacitor_SMD:C_0603_1608MetricC13
18.2nHInductor_SMD:L_0402_1005MetricL1
1Antenna_ShieldConnector_Coaxial:SMA_Wurth_60312002114503_VerticalAE1
1CH330NPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1Conn_01x03_FemaleConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ3
1Conn_01x04_FemaleConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ2
1LED_gLED_SMD:LED_0603_1608MetricD1
1LED_wLED_SMD:LED_0603_1608MetricD2
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU6
1NRF24L01+Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU1
1STM32G031F8PxPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU4
1SW_Push_DualButton_Switch_THT:SW_PUSH_6mm_H9.5mmSW1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U5
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J1
1XC6206PxxxMRPackage_TO_SOT_SMD:SOT-23U3

Similar boards

  • 4 layers60 × 77 mmDrv board, the printed circuit board in 3D

    Drv board

    klebol/Klebot_PCB

    Main PCB for klebot project.

    118 parts
  • 2 layers38.3 × 20.8 mmESP AHT10-Extra, the printed circuit board in 3D

    ESP AHT10-Extra

    c-/ESP-AHT10-Extra

    minimalist ESP-8266 temperature/humidity sensor

    27 parts20
  • 2 layers160 × 100 mm36C3 Badge Hardware, the printed circuit board in 3D

    36C3 Badge Hardware

    CatoLynx/36C3-Badge

    VFD and LED badge fitting the 36C3 design

    159 parts5GPL-3.0
  • 4 layers46 × 74 mmOpenRetroPad, the printed circuit board in 3D

    OpenRetroPad

    OpenRetroPad/OpenRetroPadHW

    Custom PCB for OpenRetroPad

    71 parts2
  • 2 layers64 × 72 mm16seg Controller, the printed circuit board in 3D

    16seg Controller

    CatoLynx/16_Segment_Display_HW_Controller

    ESP32-based controller board for large 16-segmend LED display

    59 parts1

Questions

How big is the Transmisor PCB?

It measures 48 × 19.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Transmisor use?

46 parts, built around the CH330N, NRF24L01P-R, MPU-6050 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transmisor KiCad files?

From the m-turambar/Glamdring repository on GitHub, at the commit this page was made from: the board is kicad/transmisor.kicad_pcb and its schematic kicad/transmisor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transmisor design in my own project?

Its repository states no licence, so its author keeps all rights: ask m-turambar before reusing the design.