2 layers100 × 90 mm
2 layers64 × 50 mm
Clock divider
lytex/miscPCBs that don't go in any particular repo
- Size
- 64 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 30
- Pads
- 102
- Tracks, vias
- 163, 3
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jan 2026
- Updated
- 20 May 2026
Overview
Clock divider is an open-source printed circuit board by lytex, from the lytex/misc repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 64 × 50 mm with 14 parts on 30 nets, routed with 163 tracks and 3 vias.
Its parts include 9 connectors, 2 capacitors and 2 ICs. It belongs with the lEDs and displays boards of this library.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 2 | Clock | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J1, J4 |
| 2 | Reset | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J3, J6 |
| 1 | 4022 | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | 4022 Outputs | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical | J7 |
| 1 | 4040 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | 4040 Outputs | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J2 |
| 1 | Enable | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J5 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | R_Network05_Split | Resistor_THT:R_Array_SIP6 | RN1 |
| 1 | VCC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
Questions
How big is the Clock divider PCB?
It measures 64 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Clock divider use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clock divider KiCad files?
From the lytex/misc repository on GitHub, at the commit this page was made from: the board is clock divider 4022/clock divider.kicad_pcb and its schematic 40106 monostable/40106 monostable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clock divider design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from lytex/misc
9- 2 layers58.3 × 67 mm
- 2 layers62.3 × 62.5 mm
- 2 layers120 × 70 mm
- 2 layers30 × 110 mm
- 2 layers73.7 × 50.8 mm
- 2 layers60 × 63 mm
- 2 layers64 × 50 mm
- 2 layers53.6 × 56.8 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
