2 layers100 × 90 mm
2 layers60 × 63 mm
Multistate filter
lytex/miscPCBs that don't go in any particular repo
- Size
- 60 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 14
- Pads
- 47
- Tracks, vias
- 78, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jan 2026
- Updated
- 20 May 2026
Overview
Multistate filter is an open-source printed circuit board by lytex, from the lytex/misc repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 60 × 63 mm with 15 parts on 14 nets, routed with 78 tracks and 2 vias.
Its parts include 6 connectors, 3 capacitors, 3 resistors and 1 IC.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 10n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Alps_RK163_Single_Horizontal | RV2 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Alps_RK163_Dual_Horizontal | RV1 |
| 1 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 4069 | Package_DIP:DIP-14_W7.62mm | U1 |
| 1 | BP | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J5 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J2 |
| 1 | HP | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J4 |
| 1 | IN | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J3 |
| 1 | LP | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J6 |
| 1 | VCC | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | J1 |
More from lytex/misc
9- 2 layers58.3 × 67 mm
- 2 layers62.3 × 62.5 mm
- 2 layers120 × 70 mm
- 2 layers30 × 110 mm
- 2 layers73.7 × 50.8 mm
- 2 layers64 × 50 mm
- 2 layers64 × 50 mm
- 2 layers53.6 × 56.8 mm
Similar boards
- 2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
Questions
How big is the Multistate filter PCB?
It measures 60 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Multistate filter use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Multistate filter KiCad files?
From the lytex/misc repository on GitHub, at the commit this page was made from: the board is multistate filter/multistate filter.kicad_pcb and its schematic 40106 monostable/40106 monostable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Multistate filter design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).