

XR-2208
PCBs that don't go in any particular repo
- Size
- 30 × 110 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 21
- Pads
- 71
- Tracks, vias
- 137, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 19 Jan 2026
- Updated
- 20 May 2026
Overview
XR-2208 is an open-source printed circuit board by lytex, from the lytex/misc repository on GitHub, published under the LGPL-2.1 licence. It is a 2-layer board of 30 × 110 mm with 21 parts on 21 nets, routed with 137 tracks and 15 vias.
Its parts include 6 resistors, 4 connectors, 3 capacitors and 1 IC.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3-Via2 |
| 2 | 100n | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C3 |
| 2 | 24k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5-Via5, Ri1 |
| 2 | 25k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2, RV3 |
| 1 | 100k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV4 |
| 1 | 20p | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1 |
| 1 | 240k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4-Via4 |
| 1 | 300k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | Rf1 |
| 1 | 30k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | RX1-Via1 |
| 1 | 5k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1-Via3 |
| 1 | 62k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | RY1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J10 |
| 1 | Vx | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J12 |
| 1 | Vy | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J11 |
| 1 | Vz | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J9 |
| 1 | XR-2208 | Package_DIP:DIP-16_W7.62mm | IC1 |
More from lytex/misc
9- 2 layers100 × 90 mm

- 2 layers58.3 × 67 mm

- 2 layers62.3 × 62.5 mm

- 2 layers120 × 70 mm

- 2 layers73.7 × 50.8 mm

- 2 layers60 × 63 mm

- 2 layers64 × 50 mm

- 2 layers64 × 50 mm

- 2 layers53.6 × 56.8 mm

Similar boards
- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

- 2 layers45.5 × 42.9 mm

Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm

Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm

QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm

- 2 layers161.3 × 111.8 mm

Questions
How big is the XR-2208 PCB?
It measures 30 × 110 mm and has 2 copper layers, 1.6 mm thick.
What parts does the XR-2208 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XR-2208 KiCad files?
From the lytex/misc repository on GitHub, at the commit this page was made from: the board is XR-2208/XR-2208.kicad_pcb and its schematic 40106 monostable/40106 monostable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the XR-2208 design in my own project?
Its repository publishes it under the LGPL-2.1 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).