
Panel
lyso1/Lysol-XYZ-DBoard
An edited version of the daughter board that was used on XYZ's B-KEN-KO

An edited version of the daughter board that was used on XYZ's B-KEN-KO
Panel v2 is an open-source printed circuit board by lyso1, from the lyso1/Lysol-XYZ-DBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 154.1 × 186.5 mm with 720 parts on 9 nets, routed with 3,915 tracks and 450 vias.
It is built around the SMF9.0CA. Its parts include 90 resistors, 90 connectors, 45 diodes and 45 fuses.
An edited version of the daughter board that was used on XYZ's B-KEN_KO. This version of the xyz dboard uses the same pinout as c3 unified dboard used on many other boards and other vendors sell.
This version exists because the original lacked a resetable fuse for over current as well as a diode for some over volt protection.
There's a pre made panel gerber/project file as well as a BOM and CPL file for JLCPCB prodution and assembly that'll make around 225 dboards from one order at the minimum of 5 panels/pcbs. if you need to change anything bom wise, i'd suggest doing so through the JLCPCB KIcad v6 plugin for easy modifications.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +74 |
| 90 | Mount-M2 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MH1, MH2, MH10, MH11, MH12, MH13, MH14, MH15, MH16, MH17, MH18, MH19, MH20, MH21, MH22, MH23 +74 |
| 45 | 500mA | Fuse:Fuse_1206_3216Metric | F1, F2, F10, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23 +29 |
| 45 | Conn_01x04 | random-keyboard-parts:JST-SR-4 | J1, J10, J11, J12, J15, J16, J17, J20, J21, J22, J25, J26, J29, J30, J33, J34 +29 |
| 45 | SMF9.0CA | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 45 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2, J3, J13, J14, J18, J19, J23, J24, J27, J28, J31, J32, J35, J36, J39, J40 +29 |
The 360 most common of 720 parts.

lyso1/Lysol-XYZ-DBoard
An edited version of the daughter board that was used on XYZ's B-KEN-KO

lyso1/Lysol-XYZ-DBoard
An edited version of the daughter board that was used on XYZ's B-KEN-KO

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly

yanghu/unicorne
A one-piece 40% ortho keyboard design inspired by crkbd, Kyria and Ferris.


AeternusCo/STM32-Reference-Keyboard
This schematic has not been officially tested. It follows best practices and should work, but please confirm your design before placing a large order!


bluepylons/A-Thinkpad-USB-keyboard
This is a project attempting to make a USB keyboard/Trackpoint controller and enclosure for the non-chiclet Thinkpad keyboard (from the 10/20 generation, such as the T410, W520, etc.).

bluepylons/A-USB-Daughterboard
A USB-C daughterboard with a 4-port USB hub on it, based on the Microchip USB2514 IC

It measures 154.1 × 186.5 mm and has 2 copper layers, 1.6 mm thick.
720 parts, built around the SMF9.0CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lyso1/Lysol-XYZ-DBoard repository on GitHub, at the commit this page was made from: the board is Panel v2.kicad_pcb and its schematic Unified-Daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).