

Hedge65-pcb
Creating the Hedge65 PCB
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 123
- Pads
- 759
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Dec 2020
- Updated
- 7 Aug 2022
Overview
Hedge65-pcb is an open-source printed circuit board by Lyncht98, from the Lyncht98/Hedge65 repository on GitHub, published under the MIT licence. It is a 2-layer board with 160 parts on 123 nets.
It is built around the ATMEGA32U4. Its parts include 72 diodes, 7 capacitors, 4 resistors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
discipline-master/discipline-master/README.mdDISCIPLINE V2
65% keyboard assembled with only through hole components, including usb type-c
Discipline V2 is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. 
This PCB design may be freely reproduced, modified, and manufactured for PERSONAL USE ONLY and may not be reproduced in physical form for public sale outside of CFTKB.com.
If you have built upon this work and have changed the design in a significant way, the non-commercial clause can be waived. If you have developed your own design using files in this repository and would like to sell it, please contact me at bryan@cftkb.com. I fully support those looking to make new things and be creative and will more than likely approve and support your project.
BOM, Build Guide, and Flashing Information
Kits available at cftkb.com
Optional High Profile Lasercut Acrylic Case

Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 73 | MX-NoLED | MX_Alps_Hybrid:MX-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +57 |
| 72 | D_Small | cftkb:D_DO-35_SOD27_P5.08mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +56 |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6 |
| 4 | R_Small | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | ATMEGA32U4 | ATmega32U4:ATmega32U4 | U1 |
| 1 | SW_PUSH | random-keyboard-parts:SKQG-1155865 | SW1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401548E4-2A_CircularHoles | J1 |
| 1 | XTAL_GND | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | X1 |
More from Lyncht98/Hedge65
1- 2 layers304.9 × 122.8 mm

Similar boards
- 2 layers89 × 100 mm

Hub16
joshajohnson/Hub16
A macro pad with 16 keys, two rotary encoders, a four port USB hub, and plenty of LEDs!
132 parts388 - 2 layers22.9 × 36.7 mm

Usb2usb
tmk/USB2USB_Converter
USB to USB keyboard protocol converter supported by TMK keyboard firmware
26 parts152 - 2 layers303.6 × 96.1 mm

- 2 layers114.9 × 77 mm

- 2 layers444.1 × 151.2 mm

Gh80-3003
evyd13/gh80-series
GH80-1800, GH80-3700 and GH80-3003 by Evy (aka anykeys.eu)
287 parts69CC-BY-SA-4.0 - 2 layers232.2 × 76.7 mm

- 2 layers373.2 × 131.8 mm

- 2 layers17.8 × 33 mm

Questions
What parts does the Hedge65-pcb use?
160 parts, built around the ATMEGA32U4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hedge65-pcb KiCad files?
From the Lyncht98/Hedge65 repository on GitHub, at the commit this page was made from: the board is hedge65-pcb/hedge65-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hedge65-pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).