
Retro programmer
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
Processor.Z80 is an open-source printed circuit board by lynchaj, from the lynchaj/duodyne repository on GitHub. It is a 2-layer board of 235 × 160 mm with 136 parts on 408 nets, routed with 6,202 tracks and 213 vias.
It is built around the ATTINY13-20PU, 74LS245SC and 74LS373SC, with the PCF8584T, 74LS670 and 74HCT374D among its other parts. Its parts include 41 capacitors, 35 ICs, 12 resistors, 12 diodes and 12 connectors. It belongs with the retro computing and games boards and the ESP32, AVR (ATmega, ATtiny) and FPGA and CPLD boards of this library.
duodyne is a hobbyist retrocomputer system comprised of modules on a system bus. It is specifically designed to run RomWBW, however, provides support for multiple processor architectures and has a flexible and expandable system bus.
The system bus is designed to support multiple vintage or retro computer processor architectures such as those from Intel, Zilog, Motorola, Mostek, etc. The Z80 is the primary CPU used to develop the initial round of peripherals.
Duodyne borrows heavily from previous computer systems. The form factor is similar to S-100 and VME. The bus is electrically is derived from ECB with many extensions to support other processor architectures and improved power distribution. There are multiple pins for 5V and ground. +12V and -12V are supported. 3.3V and other values can be derived on board using voltage regulators.
The plan for the system is to have balance between functionality and complexity. A single function per board has good distribution and easy expansion but leads to many boards and a large backplane which can lead to electrical and signal distribution issues. However, full integration into a single board computer reduces complexity somewhat but can make expansion difficult.
Duoodyne's bus based approach with a generous board form factor allows for a blend of integration and distribution of two or more functions per board leading to a smaller overall backplane yet retaining flexibility for easy expansion.
The duodyne core system is defined as an 4-slot or 8-slot backplane, a Z80 or other processor (currently, Z80, 65C816, and TMS9995 are supported), and a ROMRAM board. The ROMRAM memory board assumes an 8-bit data bus so CPU's with larger data busses may require dedicated memory boards. The Z80 processor includes a debugging serial port for console access. The boot ROM is included on the ROMRAM board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24 +18 |
| 11 | LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D1, D2, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 6 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U1, U5, U6, U11, U23, U31 |
| 5 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C25, C26, C27, C28 |
| 5 | 4700 | Resistor_THT:R_Array_SIP9 | RN1, RN2, RN4, RN5, RN6 |
| 4 | GAL22V10 | Package_DIP:DIP-24_W7.62mm | U25, U34, U36, U37 |
| 4 | NetTie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT1, NT2, NT3, NT4 |
| 4 | WS SEL | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1, J2, J3, J4 |
| 3 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R5, R21 |
| 3 | 4700 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9 |
| 3 | CONN_02X25 | Connector_IDC:IDC-Header_2x25_P2.54mm_Horizontal | P1, P2, P3 |
| 2 | 10K | Resistor_THT:R_Array_SIP9 | RN3, RN8 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 470 | Resistor_THT:R_Array_SIP9 | RN7, RN9 |
| 2 | 74LS07 | Package_DIP:DIP-14_W7.62mm | U4, U17 |
| 2 | 74LS670 | Package_DIP:DIP-16_W7.62mm | U9, U22 |
| 2 | 74LS688 | Package_DIP:DIP-20_W7.62mm | U12, U21 |
| 2 | ATtiny13-20PU | Package_DIP:DIP-8_W7.62mm | U28, U32 |
| 2 | DMA-PLCC-44-CMOS | Package_LCC:PLCC-44_THT-Socket | U18, U19 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 1000 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 1800 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C29 |
| 1 | 2N3904 | Package_TO_SOT_THT:TO-92_HandSolder | Q1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C46 |
| 1 | 74HCT374 | Package_DIP:DIP-20_W7.62mm | U33 |
| 1 | 74LS06 | Package_DIP:DIP-14_W7.62mm | U24 |
| 1 | 74LS148 | Package_DIP:DIP-16_W7.62mm | U15 |
| 1 | 74LS164 | Package_DIP:DIP-14_W7.62mm | U13 |
| 1 | 74LS175 | Package_DIP:DIP-16_W7.62mm | U20 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U8 |
| 1 | 74LS373 | Package_DIP:DIP-20_W7.62mm | U16 |
| 1 | 74LS74 | Package_DIP:DIP-14_W7.62mm | U10 |
| 1 | BAO SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP9 |
| 1 | BUS CPU | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | JP7 |
| 1 | BYPASS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P4 |
| 1 | CPU CLOCK | Package_DIP:DIP-14_W7.62mm | U3 |
| 1 | DMA1 BYPASS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | JP8 |
| 1 | DMA2 BYPASS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | JP6 |
| 1 | DS1233 | Package_TO_SOT_THT:TO-92L_HandSolder | U26 |
| 1 | FPANEL | Connector_IDC:IDC-Header_2x20_P2.54mm_Horizontal | J11 |
| 1 | GAL16V8 | Package_DIP:DIP-20_W7.62mm | U35 |
| 1 | I2C INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J12 |
| 1 | IO PORT ADDR | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | JP10 |
| 1 | IO PORT ADDR | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | JP4 |
| 1 | PCF8584 | Package_DIP:DIP-20_W7.62mm | U27 |
| 1 | RES SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP14 |
| 1 | RESET | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | TICK INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J6 |
| 1 | TL16C550CFN | Package_LCC:PLCC-44_THT-Socket | U14 |
| 1 | UART CLOCK | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | UART INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | Z80CPU-LCC | Package_LCC:PLCC-44_THT-Socket | U7 |

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus


kev-ju/PC-Retro-MTM
Modern KiCad version of the IBM 5150 system board originally created by MTM Scientific, Inc.

CPTforever/8088-MicroATX-Computer
A 8088 based, IBM 5150 like computer compatible with the MicroATX motherboard form factor.

Nakazoto/CenturionComputer
This is just a simple backup of all the files related to the Centurion that I have stored on my HD. The Wiki itself has far more in-depth information about the Centurion and it's individual cards.


misterblack1/zenith_zt1
Information gathered on the Zenith ZT-1 / ZT-10 / ZT-11 and ZTX/ZT-x-A variants


RichCini/LomasBoards
Small repository of files/data related to Lomas Data Products S-100 boards.
It measures 235 × 160 mm and has 2 copper layers, 1.6 mm thick.
136 parts, built around the ATTINY13-20PU, 74LS245SC, 74LS373SC and PCF8584T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lynchaj/duodyne repository on GitHub, at the commit this page was made from: the board is 03 processor.Z80, V1.1/processor.Z80.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lynchaj before reusing the design.