Skip to the content
2 layers235 × 160 mmInput output.Disk, the printed circuit board in 3D

Input output.Disk

lynchaj/duodyne15

Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

Size
235 × 160 mm
Copper layers
2
Thickness
1.6 mm
Parts
136
Nets
491
Pads
1,051
Tracks, vias
3,048, 79
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
16 Mar 2023
Updated
27 Jul 2025

Overview

Input output.Disk is an open-source printed circuit board by lynchaj, from the lynchaj/duodyne repository on GitHub. It is a 2-layer board of 235 × 160 mm with 136 parts on 491 nets, routed with 3,048 tracks and 79 vias.

It is built around the 74LS245SC, WIZ850IO and 74AHC02D, with the 74HCT175D, 74LS14PC and 74LS163APC among its other parts. Its parts include 35 capacitors, 34 resistors, 24 ICs, 20 connectors and 7 diodes. It belongs with the retro computing and games boards and the ESP32 and FPGA and CPLD boards of this library.

Main components

8

README

README.md

duodyne

  • duodyne is a hobbyist retrocomputer system comprised of modules on a system bus. It is specifically designed to run RomWBW, however, provides support for multiple processor architectures and has a flexible and expandable system bus.

  • The system bus is designed to support multiple vintage or retro computer processor architectures such as those from Intel, Zilog, Motorola, Mostek, etc. The Z80 is the primary CPU used to develop the initial round of peripherals.

  • Duodyne borrows heavily from previous computer systems. The form factor is similar to S-100 and VME. The bus is electrically is derived from ECB with many extensions to support other processor architectures and improved power distribution. There are multiple pins for 5V and ground. +12V and -12V are supported. 3.3V and other values can be derived on board using voltage regulators.

  • The plan for the system is to have balance between functionality and complexity. A single function per board has good distribution and easy expansion but leads to many boards and a large backplane which can lead to electrical and signal distribution issues. However, full integration into a single board computer reduces complexity somewhat but can make expansion difficult.

  • Duoodyne's bus based approach with a generous board form factor allows for a blend of integration and distribution of two or more functions per board leading to a smaller overall backplane yet retaining flexibility for easy expansion.

  • The duodyne core system is defined as an 4-slot or 8-slot backplane, a Z80 or other processor (currently, Z80, 65C816, and TMS9995 are supported), and a ROMRAM board. The ROMRAM memory board assumes an 8-bit data bus so CPU's with larger data busses may require dedicated memory boards. The Z80 processor includes a debugging serial port for console access. The boot ROM is included on the ROMRAM board.

Parts

136
QtyValueFootprintReferences
240.1uCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C28, C30, C32 +8
910KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4, R5, R7, R33, R35, R37, R38, R43, R46
910uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC20, C21, C22, C23, C24, C25, C26, C27, C33
922KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR29, R32, R34, R36, R39, R40, R44, R45, R48
8470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R8, R9, R14, R15, R16, R30, R31
44700Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR10, R11, R12, R13
4LEDLED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mmD1, D3, D4, D5
4NetTie_2NetTie:NetTie-2_THT_Pad0.3mmNT1, NT2, NT3, NT4
3CONN_02X25Connector_IDC:IDC-Header_2x25_P2.54mm_HorizontalP1, P2, P3
3GAL16V8Package_DIP:DIP-20_W7.62mmU10, U11, U12
3LEDLED_THT:LED_D3.0mmD2, D6, D7
21000Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR41, R42
274LS244Package_DIP:DIP-20_W7.62mmU13, U15
2DIL14Package_DIP:DIP-14_W7.62mmJ1, J4
2DIL16Package_DIP:DIP-16_W7.62mmJ2, J5
2DIL20Package_DIP:DIP-20_W7.62mmJ3, J6
2MountingHoleMountingHole:MountingHole_2.2mm_M2_DIN965_PadH3, H4
2MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2
10Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6
10.47uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC29
11000Resistor_THT:R_Array_SIP9RP1
110KResistor_THT:R_Array_SIP9RN1
116 MHzPackage_DIP:DIP-14_W7.62mmU7
12200Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR47
125LCxxxPackage_DIP:DIP-8_W7.62mmU30
133uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC31
174AHC02Package_DIP:DIP-14_W7.62mmU26
174ALS10Package_DIP:DIP-14_W7.62mmU23
174HCT175Package_DIP:DIP-16_W7.62mmU27
174LS06Package_DIP:DIP-14_W7.62mmU3
174LS138Package_DIP:DIP-16_W7.62mmU24
174LS14Package_DIP:DIP-14_W7.62mmU5
174LS163Package_DIP:DIP-16_W7.62mmU25
174LS165Package_DIP:DIP-16_W7.62mmU29
174LS245Package_DIP:DIP-20_W7.62mmU14
174LS273Package_DIP:DIP-20_W7.62mmU16
174LS595Package_DIP:DIP-16_W7.62mmU28
174LS688Package_DIP:DIP-20_W7.62mmU21
182C55A_PLCCPackage_LCC:PLCC-44_THT-SocketU6
19.6 MHzPackage_DIP:DIP-14_W7.62mmU9
1BYPASSConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalP4
1DREQ SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalP9
1ENET INTConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2
1ENET INTERRUPTConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ13
1EXT LEDConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1FDC CLKConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalP7
1FDC INTERRUPTConnector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ7
1FLOPPYConnector_IDC:IDC-Header_2x17_P2.54mm_HorizontalP10
1IDEConnector_IDC:IDC-Header_2x20_P2.54mm_HorizontalP6
1IDE PWRConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalK2
1IO PORT ADDRConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_VerticalSW1
1MISOConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP3
1PPIConnector_IDC:IDC-Header_2x13_P2.54mm_HorizontalP5
1PPI PWRConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalK1
1RESET SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ9
1SD_CardAmphenol SD Card:SD_Card_ReceptacleJ12
1SPX2920U-3.3_TO220Package_TO_SOT_THT:TO-220-3_Horizontal_TabDownU20
1TEND SELConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalP8
1WD37C65BJMPackage_LCC:PLCC-44_THT-SocketU8
1WIZ850IOWIZ850IO:WIZ850IOU31

More from lynchaj/duodyne

12
  • 2 layers160 × 200 mmRetro programmer, the printed circuit board in 3D

    Retro programmer

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    209 parts15
  • 2 layers235 × 160 mmTemplate.prototyping, the printed circuit board in 3D

    Template.prototyping

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    194 parts15
  • 2 layers235 × 160 mmInput output.Media, the printed circuit board in 3D

    Input output.Media

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    191 parts15
  • 2 layers235 × 160 mmInput output.Media, the printed circuit board in 3D

    Input output.Media

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    188 parts15
  • 2 layers200 × 160 mmSAB80535-Dev Board, the printed circuit board in 3D

    SAB80535-Dev Board

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    187 parts15
  • 2 layers235 × 160 mmInput output.Voice, the printed circuit board in 3D

    Input output.Voice

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    176 parts15
  • 2 layers235 × 160 mmInput output.Multi, the printed circuit board in 3D

    Input output.Multi

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    167 parts15
  • 2 layers235 × 160 mmInput output.GDC, the printed circuit board in 3D

    Input output.GDC

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    159 parts15
  • 2 layers235 × 160 mmInput output.Multi, the printed circuit board in 3D

    Input output.Multi

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    159 parts15
  • 2 layers235 × 160 mmMemory.ROMRAM, the printed circuit board in 3D

    Memory.ROMRAM

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    150 parts15
  • 2 layers235 × 160 mmMemory.ROMRAM, the printed circuit board in 3D

    Memory.ROMRAM

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    143 parts15
  • 2 layers235 × 160 mmInput output.SelfHost, the printed circuit board in 3D

    Input output.SelfHost

    lynchaj/duodyne

    Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

    139 parts15

Similar boards

  • 2 layers301.5 × 367.3 mmOSI 600D Superboard II Cherry Solder Mask, the printed circuit board in 3D

    OSI 600D Superboard II Cherry Solder Mask

    Bambelweeny57/OSI-600D-SuperBoard-II

    KiCad 10 recreation of the Ohio Scientific Superboard II Model 600 rev D (1980) with Cherry MX keyswitches, 27C16/2816 ROMs, full schematic and assembly guide.

    314 parts
  • 2 layers254 × 134.6 mmNew enet, the printed circuit board in 3D

    New enet

    jayacotton/inettools-z80

    Inet tools for z80-rc2014 tcp/ip stack code.

    36 parts22MIT
  • 2 layers426 × 307 mmI7000, the printed circuit board in 3D

    I7000

    felipesanches/Itautec_I7000_KICAD

    Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs

    115 parts
  • 4 layers298.9 × 270 mmDino v0 0 2, the printed circuit board in 3D

    Dino v0 0 2

    robertrico/dino-homebrew

    A perfboard with the bus edge and the slot decode every DINO card repeats. Plug it into any of J1-J8 on the Rev 1.0 mainboard, pick the slot with one shunt, bodge the card on the grid.

    239 parts
  • 2 layers244 × 244 mm6809PC-6U, the printed circuit board in 3D

    6809PC-6U

    danwerner21/6809PC

    6809 PC

    167 parts2
  • 2 layers253.2 × 203 mmPegasus2023, the printed circuit board in 3D

    Pegasus2023

    NeilsVintageComputers/1981_Aamber-Pegasus-2023-Revival

    My first computer, this is a replica I produced from the original schematics using original old components.

    156 partsUnlicense
  • 2 layers279.4 × 203.2 mmZ180GDC, the printed circuit board in 3D

    Z180GDC

    lynchaj/rhyophyre

    Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

    249 parts12
  • 2 layers129.5 × 100 mmQl Cumana, the printed circuit board in 3D

    Ql Cumana

    alvaroalea/QL_Cumana_FLoppyController

    A clone of the Cumana's Disk Interface for the Sinclair QL

    40 partsCERN-OHL-S-2.0

Questions

How big is the Input output.Disk PCB?

It measures 235 × 160 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Input output.Disk use?

136 parts, built around the 74LS245SC, WIZ850IO, 74AHC02D and 74HCT175D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Input output.Disk KiCad files?

From the lynchaj/duodyne repository on GitHub, at the commit this page was made from: the board is 08 input-output.Disk, V1.0/input-output.Disk.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Input output.Disk design in my own project?

Its repository states no licence, so its author keeps all rights: ask lynchaj before reusing the design.