

Maturaprojekt halt
- Size
- 108 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 44
- Pads
- 182
- Tracks, vias
- 539, 84
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 11 Sep 2026
- Updated
- 7 Nov 2026
Overview
Osc is an open-source printed circuit board by lukimcfly, from the lukimcfly/MaturaProjekt repository on GitHub. It is a 2-layer board of 108 × 108 mm with 61 parts on 44 nets, routed with 539 tracks and 84 vias.
It is built around the 74LVC2G17GW, OPA1662AID and BC547. Its parts include 27 resistors, 13 capacitors, 6 diodes, 6 connectors and 4 ICs. It belongs with the audio and music boards of this library.
Main components
374LVC2G17GW
SOT-363-40℃~+125℃ 1 1.65V~5.5V 10uA 2 24mA 24mA 5.4ns@3.3V,50pF 74LVC Schmitt trigger Unidirectional SOT-363 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversOPA1662AID
SOIC-8-1.5V~18V、3V~36V -40℃~+85℃ 0.00006% 1.5mA 2-Channel SOIC-8 Audio Amplifiers ROHSTexas InstrumentsAudio AmplifiersBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdMaturaprojekt — Analoger Synthesizer
Physisches Produkt: analoger Synthesizer mit 3 Oszillatoren, Mixer, Amplifier und Distortion. Dazu eine Fourier-Analyse von analogem und digitalem Ton sowie die schriftlichen Abgabedokumente.
Abgabetermin: 10. November 2026 Zwischenziel: physisches Produkt fertig bis zu den Herbstferien
Stand (22.09.2026)
Alles bestellbereit. Schaltplan, drei Platinen und Einkauf sind fertig; die Warenkörbe bei Tayda, LCSC und Conrad sind gefüllt, JLCPCB braucht noch den Login.
| Gesamtschaltplan | ERC-sauber: 0 Fehler, 0 Warnungen |
| Oszillator-Platine (3× pro Gerät) | DRC-sauber, 0 offene Netze |
| Filter-Platine (4× pro Gerät) | DRC-sauber, 0 offene Netze |
| Hauptplatine (1×) | DRC-sauber, 0 offene Netze |
| Fertigungsdaten | vollständig in Platinen/Fertigung/, inkl. Bestückung der SMD-Chips |
| Einkauf für 2 Geräte | rund CHF 378 inkl. Platinen, Versand und MWST – Einkauf/BESTELLEN.md |
Nächster Schritt: bestellen, möglichst bis 24.09. (danach chinesische Feiertage). Was sich am 22.09. geändert hat, steht im Tagebuch vom 22.09..
Ordnerstruktur
| Ordner | Inhalt |
|---|---|
diary/ | Arbeitstagebuch, eine Datei pro Arbeitstag |
plan/ | Zeitpläne |
quellen/ | Lernmaterial, später Quellenverzeichnis |
Bilder/ | Schaltpläne, Aufbaufotos, Messungen |
Schul-Unterlagen/ | Vorgaben, Kriterien, Formulare von der Schule |
Unsere-Materialien/ | Logbuch und schriftlicher Kommentar zur Abgabe |
SynthesizerFinal/ | Gesamtschaltplan des Synthesizers (KiCad) |
Platinen/ | Die drei Leiterplatten: Layout, Gerber, Stücklisten, Verdrahtung |
Einkauf/ | Einkaufsliste (Excel), Bestellanleitung, Sicherungskopien der Warenkörbe |
Werkzeuge/ | Die Skripte, mit denen Schaltplan und Platinen erzeugt wurden |
KicadCircuit/ | Ursprüngliche Einzelschaltpläne (Vorstufe, nur noch als Vergleich) |
Arbeitsregel
Der Arbeitsprozess wird immer direkt nach dem Arbeiten dokumentiert.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R101, R106, R107, R109, R110, R111, R113, R114, R118, R119, R120, R123, R125, R127 |
| 7 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C105, C106, C107, C108, C109, C110, C111 |
| 6 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D101, D102, D103, D104, D105, D106 |
| 4 | MountingHole_3.2mm_M3 | MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R117, R122 |
| 2 | 10uF/25V | CP_Radial_D5.0mm_P2.50mm | C112, C113 |
| 2 | 1uF | C_Rect_L7.0mm_W4.5mm_P5.00mm | C103, C104 |
| 2 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R104, R108 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R121 |
| 1 | 15nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C102 |
| 1 | 16k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R105 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R102 |
| 1 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R116 |
| 1 | 20k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R126 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R103 |
| 1 | 330k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R115 |
| 1 | 56k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R124 |
| 1 | 56nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C101 |
| 1 | 74LVC2G17 | SOT-23-6 | U102 |
| 1 | 82k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R112 |
| 1 | Audio aus -> Mixer | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J115 |
| 1 | BC547 | TO-92_Inline_Wide | Q101 |
| 1 | OPA1662 | SOIC-8_3.9x4.9mm_P1.27mm | U104 |
| 1 | Panel Buchsen | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J114 |
| 1 | Panel Potis | JST_XH_B11B-XH-A_1x11_P2.50mm_Vertical | J112 |
| 1 | Panel Schalter | JST_XH_B14B-XH-A_1x14_P2.50mm_Vertical | J113 |
| 1 | TL074 | DIP-14_W7.62mm_Socket | U101 |
| 1 | TL074CDR | SOIC-14_3.9x8.7mm_P1.27mm | U103 |
| 1 | Versorgung ein | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J110 |
| 1 | Versorgung weiter | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J111 |
More from lukimcfly/MaturaProjekt
2- 2 layers96 × 98 mm

- 2 layers80 × 68 mm

Similar boards
- 6 layers157.8 × 95.2 mm

Covg daq v2
lucask07/open_covg_daq_pcb
DAQ (ADCs and DACs) PCB for the digital ion channel amplifier project.
600 parts9GPL-3.0 - 4 layers40 × 22 mm

Rgba
fu5ha/rgba
Reasonably Good Bluetooth Audio - A tiny, inline Bluetooth audio receiver for IEMs.
73 parts8 - 2 layers100 × 70 mm

- 2 layers60 × 68.7 mm

- 2 layers77.5 × 57.1 mm

Rx new full
rf-designers/transceiver
Repository containing the design for the YO6SSW SDR transceiver, version 2
197 parts2MIT - 2 layers60 × 50 mm

- 8 layers50 × 50 mm

Omodri laas
open-dynamic-robot-initiative/open-motor-driver-initiative
Open-source drive for brushless motors, following the open dynamic robot initiative
265 parts122BSD-3-Clause - 2 layers36.8 × 27.9 mm

PixelvationEngine V01
Pixelvation/Pixelvation
This GitHub repository is the current home of Pixelvation and will be updated whenever there's some significant new development.
30 parts69
Questions
How big is the Osc PCB?
It measures 108 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Osc use?
61 parts, built around the 74LVC2G17GW, OPA1662AID and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Osc KiCad files?
From the lukimcfly/MaturaProjekt repository on GitHub, at the commit this page was made from: the board is Platinen/Oszillator/osc.kicad_pcb and its schematic KicadCircuit/Filter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Osc design in my own project?
Its repository states no licence, so its author keeps all rights: ask lukimcfly before reusing the design.