2 layers60 × 40 mm
M2 board
Yenefa/AEDL
AEDL single-agent autonomous embedded development system; current M2 carrier board uses ESP32-C3 and SHT30.
21 parts1Apache-2.0
2 layers65.4 × 23.2 mm
Flippy multisensor
Luke777111/Luke1- Size
- 65.4 × 23.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 27
- Pads
- 76
- Tracks, vias
- 121, 11
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2024
- Updated
- 3 Dec 2024
Overview
Flippy multisensor is an open-source printed circuit board by Luke777111, from the Luke777111/Luke repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65.4 × 23.2 mm with 21 parts on 27 nets, routed with 121 tracks and 11 vias.
It is built around the SHT30-DIS-B10KS and LSM6DS3TR-C. Its parts include 5 capacitors, 4 resistors, 3 ICs and 2 connectors.
Main components
2
SHT30-DIS-B10KS
DFN-8-EP(2.5x2.5)-40℃~+125℃ 0%RH~100%RH 16bit 2.15V~5.5V 600uA Factory calibration、温度补偿 I2C ±0.2℃ ±2%RH DFN-8-EP(2.5x2.5) Temperature and Humidity Sensor ROHSSensirionTemperature And Humidity Sensor
LSM6DS3TR-C
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 3uA 4KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C5 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 1 | 1PPS | TestPoint:TestPoint_Pad_D1.0mm | 1PPS |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | LOGO | LOGO | G*** |
| 1 | LSM6DS3TR-C | easyeda2kicad:LGA-14_L3.0-W2.5-P0.50-TL | U2 |
| 1 | PA1010D | PA1010D:PA1010D_footprint | U3 |
| 1 | PINHD_1x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2 |
| 1 | PINHD_1x8_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | SHT30-DIS-B10KS | easyeda2kicad:DFN-8_L2.5-W2.5-P0.50-BL-EP | U1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | INT1 |
| 1 | UART RX | TestPoint:TestPoint_Pad_D1.0mm | RX |
| 1 | UART TX | TestPoint:TestPoint_Pad_D1.0mm | TX |
| 1 | reset pin | TestPoint:TestPoint_Pad_D1.0mm | RST |
| 1 | wakup pin | TestPoint:TestPoint_Pad_D1.0mm | WAKEUP |
Similar boards
- 2 layers62 × 57 mm
- 2 layers82 × 134 mm
Pcb badge
john0312/hitcon-pcb-badge
execute fw/merge.py to merge STM32CubeIDE generated main.c with user code in main.cc into main.cc.
258 parts47BSD-3-Clause - 4 layers100 × 68 mm
- 6 layers90.1 × 135 mm
- 2 layers54 × 85.6 mm
Board43
smartbank-inc/Board43
Board43 is an RP2350A-based microcontroller development board. Flash PicoRuby or your favorite firmware and start hacking.
583 parts30 - 6 layers39.5 × 39.5 mm
P4eregrine
anticitizn/p4eregrine
All-in-one ESP32 P4-based drone ESC, flight controller, and video processor
359 parts21 - 2 layers264 × 34 mm
Questions
How big is the Flippy multisensor PCB?
It measures 65.4 × 23.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flippy multisensor use?
21 parts, built around the SHT30-DIS-B10KS and LSM6DS3TR-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flippy multisensor KiCad files?
From the Luke777111/Luke repository on GitHub, at the commit this page was made from: the board is applications/external/flippy_temp/.pcb/flippy_multisensor.kicad_pcb and its schematic applications/external/dap_link/lib/free-dap/hardware/d11-nano-dbg/d11-nano-dbg.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flippy multisensor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).