Skip to the content
2 layers100 × 100 mmGateway IoT Generic, the printed circuit board in 3D

This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

Size
100 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
107
Pads
276
Tracks, vias
723, 215
Pours
7
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
17 Apr 2026
Updated
17 Apr 2026

Overview

Gateway IoT Generic is an open-source printed circuit board by LuizFernandoOliveira, from the LuizFernandoOliveira/Gateway_IoT_Generic repository on GitHub. It is a 2-layer board of 100 × 100 mm with 61 parts on 107 nets, routed with 723 tracks and 215 vias.

It is built around the THVD1450DGK, RS485 and LDL1117S33R, with the AO3400A among its other parts. Its parts include 13 resistors, 13 connectors, 10 capacitors, 4 transistors and 3 ICs. It belongs with the home automation and IoT boards and the MSP430 boards of this library.

Main components

4

README

README.md

Gateway IoT Multi-Protocolo (MSP430 version)

Status do Projeto Microcontrolador PCB

Descrição

Diferentemente das tradicionais SBCs baseadas em MPUs de alta performance, este circuito de Gateway IoT é baseado em um MCU para aplicações que necessitam gerenciar a sua rede IoT no modo ultra-low power.

Gateway IoT MSP430


Descrições técnicas

  • Microcontrolador: MSP430FR6005;
  • Alimentação externa de 5V;
  • Possui a capacidade de realizar a comunicação com até 4 periféricos UARTs padrão FAPLO;
  • Capacidade de se comunicar por meio do protocolo de comunicação:
    • 4 x UARTs (UART0, UART1, UART2, UART3);
    • 1 x RS-485 (UART2);
    • 1 x I2C (UART1);
    • 2 x SPIs (UART0 e UART1);
  • Possui LEDs de troca de dados da UART0;
  • Todos os demais pinos dos conectores padrão FAPLO podem ser usados como pinos de propósito gerais.

Estrutura do repositório

Os arquivos de hardware foram desenvolvidos utilizando o KiCad 9.0.

  • .kicad_pcb: Layout da placa de circuito impresso (Board).
  • .kicad_sch: Esquemático eletrônico do sistema (Schematic).
  • .kicad_pro: Gerenciador de projeto do KiCad (Project).

Autor

Dr. Luiz Fernando Pinto de Oliveira

Engenheiro Eletrônico especializado em Sistemas Embarcados e Ultra-Low Power.


Shield: CC BY-NC-ND 4.0

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License.

CC BY-NC-ND 4.0

Parts

61
QtyValueFootprintReferences
6FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3, FID4, FID5, FID6
5100nFCapacitor_SMD:C_0805_2012MetricC3, C4, C7, C9, C10
4AO3400APackage_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
4MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965H1, H2, H3, H4
4RResistor_SMD:R_0805_2012MetricR1, R3, R6, R7
3LEDLED_SMD:LED_0805_2012MetricD1, D2, D3
3TestPointTestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_BeadedTP1, TP2, TP3
210kResistor_SMD:R_0805_2012MetricR8, R9
22kResistor_SMD:R_0805_2012MetricR12, R13
23.7pFCapacitor_SMD:C_0805_2012MetricC6, C8
24K7Resistor_SMD:R_0805_2012MetricR4, R5
2Pull-UpConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4, J6
11KResistor_SMD:R_0805_2012MetricR2
11uFCapacitor_SMD:C_0805_2012MetricC1
12.2nFCapacitor_SMD:C_0805_2012MetricC5
12.2uFCapacitor_SMD:C_0805_2012MetricC2
132768kHzDiode_SMD:D_0805_2012MetricY1
147kResistor_SMD:R_0805_2012MetricR10
1LDL1117S33RSamacSys:SOT230P700X180-4NIC1
1LOGOLOGOG***
1MSP430FR6005IPZRSamacSys:QFP50P1600X1600X160-100NIC2
1POWERConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1POWERConnector_BarrelJack:BarrelJack_HorizontalJ2
1RF_0Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalJ3
1RF_1Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalJ5
1RF_2Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalJ7
1RF_3Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_VerticalJ8
1RS485Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_HorizontalJ13
1RS485Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ12
1RTResistor_SMD:R_1206_3216MetricR11
1SWDConnector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_VerticalJ11
1THVD1450DGKSamacSys:SOP65P490X110-8NIC3
1UART_A0Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ9
1UART_A0Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_HorizontalJ10

Similar boards

  • 2 layers100 × 100 mmUSB TO RS232 RS485, the printed circuit board in 3D

    USB TO RS232 RS485

    LuizFernandoOliveira/Conversor-USB-para-RS232-e-RS485

    This work is licensed under a [Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International License][cc-by-nc-nd].

    124 parts
  • 4 layers144 × 127 mmFrothfet, the printed circuit board in 3D

    Frothfet

    hoeken/frothfet

    Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

    394 parts14GPL-3.0
  • 4 layers95.9 × 90.2 mmHab1 flight, the printed circuit board in 3D

    Hab1 flight

    barcklay/Cube_SAT

    Building Sattelite part time

    75 parts
  • 6 layers160 × 120 mmPic32main, the printed circuit board in 3D

    Pic32main

    JuanPoueriet/automatic-spork

    Máquina de ruleta física de casino. 6 PCBs: pic32main (cerebro), wheel (rueda de LEDs), displaysa/b/c (paneles de 7 segmentos en cascada) y buttons (botonera).

    256 parts
  • 2 layers160 × 95 mmPlaced, the printed circuit board in 3D

    Placed

    Zepheus/opentherm_heating_controller

    An open-source OpenTherm heating controller PCB

    99 parts
  • 4 layers141 × 90 mmSmart db, the printed circuit board in 3D

    Smart db

    c-lydia/SmartDB

    A distribution board system designed for automatic electrical fault monitoring using Digital Signal Processing (FFT analysis), Isolation Forest, and YOLO thermal imaging detection with a Mobile App, alerting system, and…

    67 partsApache-2.0
  • 2 layers98.9 × 91.4 mmCoin Cell Tester, the printed circuit board in 3D

    Coin Cell Tester

    tomrodinger/servomotor

    Open-source NEMA-17 integrated servomotor (motor + closed-loop driver + controller + encoder). RS-485, Python/Arduino libraries, MCP server for AI control. Hardware, firmware and software.

    204 parts17MIT
  • 2 layers62 × 73.7 mmDoorBirdPico, the printed circuit board in 3D

    DoorBirdPico

    fraxinas/DoorBirdPico

    A custom Raspberry Pi Pico PCB design and code to add functionality to the DoorBird Voip entryphone.

    42 parts4

Questions

How big is the Gateway IoT Generic PCB?

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Gateway IoT Generic use?

61 parts, built around the THVD1450DGK, RS485, LDL1117S33R and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gateway IoT Generic KiCad files?

From the LuizFernandoOliveira/Gateway_IoT_Generic repository on GitHub, at the commit this page was made from: the board is Gateway_IoT_Generic.kicad_pcb and its schematic Gateway_IoT_Generic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gateway IoT Generic design in my own project?

Its repository states no licence, so its author keeps all rights: ask LuizFernandoOliveira before reusing the design.