
Titanrio
ggarciabaez/titanrio
A RoboRIO-Inspired Expansion board for Robotics. Mostly for funsies + learning.

ESP32 C3 PCA is an open-source printed circuit board by losogamestudio, from the losogamestudio/ESP32_C3_PCA repository on GitHub. It is a 2-layer board of 49.5 × 32.4 mm with 31 parts on 50 nets, routed with 241 tracks and 102 vias.
It is built around the PCA9685BS, PMEG6020AELRX and WS2812B. Its parts include 19 resistors, 5 connectors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 220 | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R17, R18, R19 |
| 2 | Conn_03x08_Pin_Servo | Footprint:PinHeader_3x08_P2.54mm_Reverse | J1, J2 |
| 1 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 113991054 | Footprint:MODULE_113991054 | U1 |
| 1 | 2.2mH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | Conn_01x02_Pin | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x03_Pin | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_Horizontal | J5 |
| 1 | Conn_01x04_Pin | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J3 |
| 1 | PCA9685BS | Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U2 |
| 1 | PMEG6020AELR | Diode_SMD:Nexperia_CFP3_SOD-123W | D1 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2 |

ggarciabaez/titanrio
A RoboRIO-Inspired Expansion board for Robotics. Mostly for funsies + learning.

sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.

fellettigiacomo/esp32-WLED-4ch-controller
Open source 4 Channel esp32-powered WLED controller with 4 relays and built in level shifter


sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.


g7npy5dws2-blip/PCB_Mastery_Course
Here will be all the documents assosiated with the PCB_Mastery_Course

It measures 49.5 × 32.4 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the PCA9685BS, PMEG6020AELRX and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the losogamestudio/ESP32_C3_PCA repository on GitHub, at the commit this page was made from: the board is ESP32_C3_PCA.kicad_pcb and its schematic ESP32_C3_PCA.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask losogamestudio before reusing the design.