4 layers100 × 75 mm
4 layers100 × 75 mm
DesingCourse Project
g7npy5dws2-blip/PCB_Mastery_CourseHere will be all the documents assosiated with the PCB_Mastery_Course
- Size
- 100 × 75 mm
- Copper layers
- 4
- Thickness
- 1.66 mm
- Parts
- 185
- Nets
- 146
- Pads
- 646
- Tracks, vias
- 1,229, 651
- Pours
- 262
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Jan 2026
- Updated
- 19 Feb 2026
Overview
DesingCourse Project is an open-source printed circuit board by g7npy5dws2-blip, from the g7npy5dws2-blip/PCB_Mastery_Course repository on GitHub. It is a 4-layer board of 100 × 75 mm with 185 parts on 146 nets, routed with 1,229 tracks and 651 vias.
It is built around the SN65HVD230D, DRV8302DCA and AMS1117-3.3, with the PUSB3AB6Z, NCP18XH103F03RB and HSBA15810C among its other parts. Its parts include 65 resistors, 60 capacitors, 15 diodes, 11 connectors and 6 transistors. It belongs with the STM32 boards of this library.
Main components
12
SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
DRV8302DCA
HTSSOP-56-6mm-40℃~+125℃ 1.7A 2.3A 25ns 25ns 8V~60V MOSFET Three Phase Under Voltage Protection、Over Voltage Protection、Over Current Protection、Overtemperature protection (OTP) HTSSOP-56-6mm Gate Drivers ROHSTexas InstrumentsBrushless DC (BLDC) Motor Driver
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PUSB3AB6Z
XSON-7(1.2x2.2)-40℃~+85℃ 0.2pF 100nA 3.3V 6 6V 6V 7A@8/20us ESD IEC 61000-4-2 XSON-7(1.2x2.2) ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
NCP18XH103F03RB
0603-40℃~+125℃ 0.8mm 1.6mm 100mW 10kΩ 1mW/℃ 310uA 3380K 3434K 3455K ±1% ±1% 0603 NTC Thermistors ROHSMurataNTC Thermistors
HSBA15810C
PRPAK5x6-8L-55℃~+150℃ 1 N-channel 100A 100V 14pF 208W 4.5mΩ@10V 4.725nF 4V 609pF 72nC@10V N-Channel PRPAK5x6-8L MOSFETs ROHSHUASHUOMOSFETs
BAT60A
SOD-323Schottky DiodesSlkor
15-21/GHC-XS1T1/2T
1206-40℃~+85℃ 130° 20mA 270mcd 3.3V 518nm 523nm 95mW Discrete Diode Green Water Clear 1206 LED Indication - Discrete ROHSEverlight ElectronicsLED Indication - Discrete
WSLP27261L000FEA
27261mΩ 7W Current Sense Resistor ±1% ±75ppm/℃ 2726 Current Sense Resistors / Shunt Resistors ROHSVishay IntertechnologyCurrent Sense Resistors / Shunt Resistors
LKMI2501K821MF
插件,D16xL25mm10000hrs@105℃ 16mm 2.6A@100kHz 25mm 32mΩ@100kHz 7.5mm 80V 820uF ±20% 插件,D16xL25mm Aluminum Electrolytic Capacitors - Leaded ROHSYminAluminum Electrolytic Capacitors - Leaded
SDR0805-220ML
SMD,7.8x7.8mm1.5A 110mΩ 2.3A 22uH ±20% SMD,7.8x7.8mm Power Inductors ROHSBournsPower Inductors
744227S
SMD-4P,9.2x6mm-40℃~+125℃ 160mΩ 1A 2 5.5kΩ@30MHz 51uH@1kHz SMD-4P,9.2x6mm Common Mode Filters ROHSWürth ElektronikCommon Mode Filters
README
README.mdPCB_Mastery_Course
Here will be all the documents assosiated with the PCB_Mastery_Course
Parts
185| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C16, C17, C18, C21, C23, C32, C33, C34, C35, C45, C46, C47 +6 |
| 11 | 0R | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R15, R16, R19, R60, R61, R62, R63, R64 |
| 11 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C22, C36, C37, C38, C40, C41, C43 |
| 10 | 2k2 | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R20, R29, R31, R33, R53, R54, R55 |
| 8 | 10k | Resistor_SMD:R_0603_1608Metric | R23, R24, R49, R56, R57, R58, R59, TH1 |
| 8 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C19, C20, C25, C26, C28, C29, C31, C50 |
| 8 | 39k | Resistor_SMD:R_0603_1608Metric | R1, R11, R28, R30, R32, R36, R42, R48 |
| 6 | 4R7 | Resistor_SMD:R_0603_1608Metric | R34, R35, R40, R41, R46, R47 |
| 6 | HSBA15810C | Package_SO:HSBA15810C | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | BAT60A | Diode_SMD:D_SOD-323 | D4, D7, D9, D12, D14 |
| 5 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2, NT3, NT4, NT5 |
| 4 | 100R | Resistor_SMD:R_0603_1608Metric | R37, R38, R43, R44 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R9, R10, R17, R18 |
| 4 | 4n7 | Capacitor_SMD:C_0603_1608Metric | C53, C54, C55, C59 |
| 4 | LED_G | Diode_SMD:D_1206_3216Metric | D2, D3, D5, D10 |
| 4 | M3 | MountingHole:MountingHole_3mm_Pad_Via | MH1, MH2, MH3, MH4 |
| 3 | 10u | Capacitor_SMD:C_1210_3225Metric | C39, C42, C44 |
| 3 | 1mm/circular | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | 7461084 | WP-BUTR:WP-BUTR_7461084 | J7, J8, J9 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric | R50, R51 |
| 2 | 10p | Capacitor_SMD:C_0603_1608Metric | C14, C15 |
| 2 | 1m | RES_WSLP2726L5000FEA:WSLP2726_1mOHM_VIS | R39, R45 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 2n2 | Capacitor_SMD:C_0603_1608Metric | C48, C49 |
| 2 | 51p | Capacitor_SMD:C_0603_1608Metric | C51, C52 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 820u | LKMI2501K821MF:RA_LKMI2501K821MF_YMIN | C1, C2 |
| 2 | 874380643 | 874380843:MOLEX_874380643 | J6, J11 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric | R52 |
| 1 | 120R | BLM18PG121SN1D:BEADC1608X95N | FB1 |
| 1 | 120p | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 16k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 18k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 205k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 22u | L_Bourns_SDR0805:IND_BOURNS_SDR0805 | L1 |
| 1 | 3k3 | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 744227S | WE-SL2:WE-SL2 | L2 |
| 1 | 874380243 | 874380843:MOLEX_874380243 | J3 |
| 1 | 874380343 | 874380843:MOLEX_874380343 | J5 |
| 1 | 874380443 | 874380843:MOLEX_874380443 | J10 |
| 1 | 874380843 | 874380843:MOLEX_874380843 | J4 |
| 1 | 8MHz | X50328MSB2GI:XTAL_MSB2GI_YXC | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | DRV8302DCA | DRV8302DCA:SOP50P810X120-57N | U4 |
| 1 | ESDCAN24-2BLY | ESDCAN24-2BLY:SOT95P237X112-3N | D15 |
| 1 | LED_R | Diode_SMD:D_1206_3216Metric | D11 |
| 1 | PESD3V3U1UA,115 | PESD3V3U1UA_115:DIO_PESD3V3U1UA_115 | D6 |
| 1 | PMEG6020AELR | Diode_SMD:Nexperia_CFP3_SOD-123W | D13 |
| 1 | PUSB3AB6Z | PUSB3AB6Z:IC_PUSB3AB6Z | U1 |
| 1 | SMAJ5.0A | Diode_SMD:D_SMA | D8 |
| 1 | SMAJ60CA | Diode_SMD:D_SMA | D1 |
| 1 | SN65HVD230D | SN65HVD230D:SOIC127P599X175-8N | U5 |
| 1 | STM32F405RGTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | TYPE-C-31-M-12 | TYPE-C-31-M-12:HRO_TYPE-C-31-M-12 | J2 |
| 1 | XT60PW-M | XT60PW-M:AMASS_XT60PW-M | J1 |
| 1 | ~ | JGB_Library:high-voltage | ID2 |
| 1 | ~ | JGB_Library:Project_ID | ID6 |
| 1 | ~ | PTS526SK15SMTR2LFS:SMT_FS | SW1 |
| 1 | ~ | JGB_Library:hot-surface | ID1 |
| 1 | ~ | JGB_Library:ESD-suceptible | ID3 |
| 1 | ~ | JGB_Library:IC-logo | ID4 |
| 1 | ~ | JGB_Library:4_Layer_ID | ID5 |
Similar boards
- 4 layers100 × 75 mm
- 4 layers100 × 75 mm
- 4 layers100 × 75 mm
- 4 layers44.2 × 66.5 mm
- 2 layers99.5 × 99.5 mm
Misc PCB
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
152 parts3MIT - 2 layers100 × 80 mm
- 4 layers116.5 × 84.4 mm
Questions
How big is the DesingCourse Project PCB?
It measures 100 × 75 mm and has 4 copper layers, 1.66 mm thick.
What parts does the DesingCourse Project use?
185 parts, built around the SN65HVD230D, DRV8302DCA, AMS1117-3.3 and PUSB3AB6Z. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DesingCourse Project KiCad files?
From the g7npy5dws2-blip/PCB_Mastery_Course repository on GitHub, at the commit this page was made from: the board is Folder_Structure/Projects/Client Name/Project Name/Design/rev01/rev01_1/DesingCourse_Project/DesingCourse_Project.kicad_pcb and its schematic Folder_Structure/Projects/Client Name/Project Name - Copy/Design/rev01/rev01_1/DesingCourse_Project/DesingCourse_Project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DesingCourse Project design in my own project?
Its repository states no licence, so its author keeps all rights: ask g7npy5dws2-blip before reusing the design.