

MachineJDG2027 Shield v2
- Size
- 100 × 89 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 66
- Pads
- 290
- Tracks, vias
- 148, 8
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 29 Sep 2026
- Updated
- 1 Oct 2026
Overview
MachineJDG2027 Shield v2 is an open-source printed circuit board by losientowilson67, from the losientowilson67/PCBRooting repository on GitHub. It is a 2-layer board of 100 × 89 mm with 82 parts on 66 nets, routed with 148 tracks and 8 vias.
It is built around the LM22678TJ-5.0, TPS54202HDDC and 1N4148W, with the MMBT3904, SMBJ15A and SS34 among its other parts. Its parts include 23 resistors, 16 capacitors, 15 connectors, 8 switches and 7 diodes.
Main components
7LM22678TJ-5.0
TO-263-7-40℃~+125℃@(TJ) 1 4.5V~42V 500kHz 5A 5V Buck Buck Built-in Fixed No TO-263-7 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS54202HDDC
UncategorisedTexas Instruments1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SMBJ15A
DO-214AA(SMB)-65℃~+150℃ 15V 18.5V 1uA 24.4V 24.6A@10/1000us 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R17, R20, R21, R23 |
| 4 | 4.7k DNP | Resistor_SMD:R_0805_2012Metric | R30, R31, R32, R33 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C18, C19, C24 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R16, R19 |
| 3 | 10uF 50V | Capacitor_SMD:C_1210_3225Metric | C10, C11, C17 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric | R15, R18 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D4, D5 |
| 2 | 22uF 16V | Capacitor_SMD:C_1206_3216Metric | C20, C21 |
| 2 | 22uF 25V | Capacitor_SMD:C_1210_3225Metric | C14, C15 |
| 2 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | G5NB-1A-E DC5V | Relay_THT:Relay_SPST_Omron_G5NB | K1, K2 |
| 2 | LED verte | LED_SMD:LED_0805_2012Metric | LED1, LED2 |
| 1 | 100k 1% | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 10A mini-lame | Fuse:Fuseholder_Blade_Mini_Keystone_3568 | F1 |
| 1 | 10k 1% | Resistor_SMD:R_0805_2012Metric | R25 |
| 1 | 10nF 50V | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 10uF 16V | Capacitor_SMD:C_1206_3216Metric | C23 |
| 1 | 12.7k 1% | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 15uH | Inductor_SMD:L_Bourns_SRN6045TA | L2 |
| 1 | 182R 1% | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 1k 1% | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 1uF 50V | Capacitor_SMD:C_0805_2012Metric | C12 |
| 1 | 220uF 16V | Capacitor_SMD:CP_Elec_8x10.5 | C16 |
| 1 | 2k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 30k 1% | Resistor_SMD:R_0805_2012Metric | R24 |
| 1 | 4.7uH | Inductor_SMD:L_Sunlord_MWSA1265S | L1 |
| 1 | 470k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 470uF 25V | Capacitor_SMD:CP_Elec_10x10.5 | C1 |
| 1 | 510k | Resistor_SMD:R_0805_2012Metric | R26 |
| 1 | 75pF | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | BATT_IN | JDG2027:691214110002 | J1 |
| 1 | EXT_IO | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J16 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | LM22678TJ-5.0 | Package_TO_SOT_SMD:TO-263-7_TabPin8 | U2 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MOT1 PWM/DIR | JDG2027:691214110002 | J3 |
| 1 | MOT2 DIR/PWM | JDG2027:691214110002 | J11 |
| 1 | MOT3 PWM/DIR | JDG2027:691214110002 | J5 |
| 1 | MOT4 DIR/PWM | JDG2027:691214110002 | J9 |
| 1 | MOT_PWR1 | JDG2027:691214110002 | J2 |
| 1 | MOT_PWR2 | JDG2027:691214110002 | J10 |
| 1 | MOT_PWR3 | JDG2027:691214110002 | J4 |
| 1 | MOT_PWR4 | JDG2027:691214110002 | J8 |
| 1 | Mega2560 PRO Embed | JDG2027:MODULE_MEGA_PRO_EMBED_CH340G_ATMEGA2560 | U1 |
| 1 | RELAIS1 | JDG2027:691214110002 | J12 |
| 1 | RELAIS2 | JDG2027:691214110002 | J13 |
| 1 | SBUS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S1 |
| 1 | SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S2 |
| 1 | SERVO3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S3 |
| 1 | SERVO4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S4 |
| 1 | SERVO5 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S5 |
| 1 | SERVO6 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | S6 |
| 1 | SMBJ15A | Diode_SMD:D_SMB | D1 |
| 1 | SS34 | Diode_SMD:D_SMA | D3 |
| 1 | SS54 | Diode_SMD:D_SMC | D2 |
| 1 | TPS54202H | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | UART2_ESP | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
More from losientowilson67/PCBRooting
2- 2 layers75 × 90 mm

- 2 layers75 × 90 mm

Similar boards
- 2 layers208 × 110 mm

Button grid
paulsonnentag/button-grid
An ESP32-S3 controller board for an 8×8 button matrix with 64 individually switched 12 V LEDs. It's designed in KiCad 9 and made to be ordered from JLCPCB.
108 parts - 2 layers100 × 89.5 mm

Led processor board
eelstretching/led-processor-board
A board with a processor and a couple of other things that can talk to an LED output board.
128 parts - 2 layers100 × 100 mm

Hour meter board microfit can handroute
ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
152 parts - 4 layers125 × 78 mm

Tab5-fpga carrier
airpocket-soundman/tab5-tang-primer20k-carrier
M5Stack Tab5とTang Primer 20K Coreを接続する共通キャリア基板の設計
118 parts - 2 layers100 × 100 mm

Carrier
moinsen-dev/open-bed-climate
Open-source, local-first bed climate system: water-cooled/heated mat, standard parts, DIY kits, Home Assistant. Design phase.
126 partsApache-2.0 - 2 layers77.5 × 70.5 mm

Power Regulator PCB (LT8608)
UofA-BAJA/2024-2025-Firmware
The software behind the electrical system in Baja Wildcat Racing.
38 parts6 - 2 layers25.5 × 45.5 mm

DCDCBuck
Ira-Doshi/Buck-Conveter-12V-to-5V-using-LM22768
A 12V to 5V buck conveter designed using LM22768 using KiCAD.
10 parts - 2 layers57.5 × 40.6 mm

Questions
How big is the MachineJDG2027 Shield v2 PCB?
It measures 100 × 89 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MachineJDG2027 Shield v2 use?
82 parts, built around the LM22678TJ-5.0, TPS54202HDDC, 1N4148W and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MachineJDG2027 Shield v2 KiCad files?
From the losientowilson67/PCBRooting repository on GitHub, at the commit this page was made from: the board is MachineJDG2027_Shield_v2/MachineJDG2027_Shield_v2.kicad_pcb and its schematic MachineJDG2027_Shield_v2/MachineJDG2027_Shield_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MachineJDG2027 Shield v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask losientowilson67 before reusing the design.