
32mz gauge main v31
logopop/sensors_display_pcb
SCH, PCB, and Gerber files for both the Display and Sensor boards.

SCH, PCB, and Gerber files for both the Display and Sensor boards.
32mz gauge4 sensors is an open-source printed circuit board by logopop, from the logopop/sensors_display_pcb repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 117.9 × 71.4 mm with 140 parts on 146 nets, routed with 1,698 tracks and 121 vias.
It is built around the SN65HVD230D, INA219AID and SAM-M8Q-0, with the AOD478 among its other parts. Its parts include 49 resistors, 27 capacitors, 19 ICs, 15 connectors and 9 diodes. It belongs with the sensors and measurement boards and the PIC boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R6, R7, R10, R14, R20, R26, R29, R32, R33, R34, R42, R43 |
| 10 | 1.5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12, R13, R18, R19, R21, R23, R31, R35, R39, R40 |
| 6 | 30pF | Capacitors_SMD:C_0603_HandSoldering | C9, C10, C11, C12, C13, C17 |
| 6 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D3, D4, D5, D6, D9 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_ISO14580_Pad | H1, H2, H3, H4, H5, H6 |
| 5 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R15, R16, R36, R37 |
| 4 | ,1u | Capacitor_SMD:C_1812_4532Metric_Pad1.30x3.40mm_HandSolder | C21, C22, C23, C24 |
| 4 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder | C14, C15, C16, C27 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R8, R30, R48 |
| 3 | .1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C5 |
| 2 | 12p | Capacitors_SMD:C_0603_HandSoldering | C7, C8 |
| 2 | 4.5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R22, R25 |
| 2 | 440 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R46, R47 |
| 2 | 47p | Capacitors_SMD:C_0603_HandSoldering | C18, C26 |
| 2 | 5.1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R27, R28 |
| 2 | 820 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R44, R45 |
| 2 | AOD478 | TO_SOT_Packages_SMD:TO-252-2 | Q1, Q2 |
| 2 | Conn_01x01_Female | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J5, J6 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8, J11 |
| 2 | Conn_01x04_Female | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J2, J3 |
| 2 | Conn_GND | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J15, J23 |
| 2 | LOGO | logo:high1 | G***, G*** |
| 2 | Q_NPN_BEC | Package_TO_SOT_SMD:SC-59_Handsoldering | Q3, Q4 |
| 2 | mmbt4007 | Diode_SMD:D_3220_8050Metric_Pad2.65x5.15mm_HandSolder | D7, D8 |
| 2 | sbm-20 | lib:sbm_20 | V1, V2 |
| 1 | logo:fry | ||
| 1 | 1 | Resistor_SMD:R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | R24 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | 100nF | Capacitors_SMD:C_0603_HandSoldering | C20 |
| 1 | 100uf 10v | Capacitor_Tantalum_SMD:CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C6 |
| 1 | 100uf 10v | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C25 |
| 1 | 100uf 25v | Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder | C4 |
| 1 | 10nF | Capacitors_SMD:C_0603_HandSoldering | C19 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R41 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 250 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R49 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R38 |
| 1 | 8k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R17 |
| 1 | Battery | lib:batt_holder_1220 | BT1 |
| 1 | Conn_01x01_Female | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J4 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J7 |
| 1 | Conn_Vin | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J14 |
| 1 | Conn_Vout | Connector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_Vertical | J22 |
| 1 | Crystal | Crystals:Crystal_DS15_d1.5mm_l5.0mm_Vertical | Y1 |
| 1 | DB15_Female_HighDensity_MountingHoles | Connector_Dsub:DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm | J9 |
| 1 | D_Zener 420mV | Diode_SMD:D_1806_4516Metric_Pad1.57x1.80mm_HandSolder | D2 |
| 1 | Fuse | highball:Fuseholder5x20_horiz_open_inline_Type-I | F1 |
| 1 | HTmodule | lib:HT_module | U12 |
| 1 | INA219AID | SOIC127P599X175-8N | U15 |
| 1 | KC5032A20.0000CM0E00 | Oscillators:Oscillator_SMD_EuroQuartz_XO53-4pin_5.0x3.2mm_HandSoldering | U4 |
| 1 | LMC555xM | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U13 |
| 1 | LOGO | logo:sensors_logo41 | G*** |
| 1 | LOGO | logo:callsign41 | G*** |
| 1 | LT1965EQPBF | lib:DDPAK-5_Q | U5 |
| 1 | MAX3238EAIT | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U1 |
| 1 | PC817 Alm | lib:SOT254P975X400-4N | U10 |
| 1 | PC817 Ign | lib:SOT254P975X400-4N | U9 |
| 1 | PC817 Rel1 | lib:SOT254P975X400-4N | U17 |
| 1 | PC817 Rel2 | lib:SOT254P975X400-4N | U18 |
| 1 | PIC18F16Q41-ESS | highball:SSOP-20_5.3x7.2mm_P0.65mm_mod | U2 |
| 1 | PIC32MZ0512EFM064-I_PT | lib:TQFP-64-1EP_10x10mm_Pitch0.5mm | U11 |
| 1 | Pic.prog | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.00mm | J1 |
| 1 | Pic.prog | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical | J10 |
| 1 | SAM-M8Q | Kicad:XCVR_SAM-M8Q | U16 |
| 1 | SN65HVD230 | Housings_SOIC:HTSOP-8-1EP_3.9x4.9mm_Pitch1.27mm_LargeCopper | U3 |
| 1 | Speaker_Crystal | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | LS1 |
| 1 | bosch_bme280_breakout | highball:bosch_bme280_breakout | U19 |
| 1 | gyro_cjmcu | lib:gyro_cjmcu | U8 |
| 1 | oled_i2c | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U6 |
| 1 | sim_808_card | lib:gsm_module_2 | U7 |
| 1 | ublox_neo7m_module | highball:ublox_neo7m_module | U14 |

logopop/sensors_display_pcb
SCH, PCB, and Gerber files for both the Display and Sensor boards.


Mines-Rocketry-Club/flight-computers
Fully open source high power rocketry flight computers.

Marcus10110/DelSolClock
This is a project to replace the clock in my car with an ESP32 and a small display.

Pioneer-Rocketry/Flight-Computer
Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets.

rice-eclipse/flight-computer
Custom STM32-Based flight computer to gather data from IMUs, altimeters, and GPS, and control in-flight pyrotechnic events.

CU-Rocketry/flight_computer
Competition Flight Computer Module 25-26


It measures 117.9 × 71.4 mm and has 4 copper layers, 1.6 mm thick.
140 parts, built around the SN65HVD230D, INA219AID, SAM-M8Q-0 and AOD478. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the logopop/sensors_display_pcb repository on GitHub, at the commit this page was made from: the board is sensor_board/32mz_gauge4_sensors.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).