
LRC-0
lnvke/DH-LRC-0
Long-range Radiofrequency Core 0, ESP32 based LoRa RF devboard, specifically for navigation, communication, and nodes.

Long-range Radiofrequency Core 0, ESP32 based LoRa RF devboard, specifically for navigation, communication, and nodes.
LRC-0 is an open-source printed circuit board by lnvke, from the lnvke/DH-LRC-0 repository on GitHub. It is a 4-layer board of 46 × 40 mm with 60 parts on 68 nets, routed with 290 tracks and 795 vias.
It is built around the SX1262IMLTRT, AP7361C-33E and BQ24075RGT, with the ESP32-C6-MINI-1, TVS1400DRV and 0900FM15K0039E among its other parts. Its parts include 19 capacitors, 14 resistors, 7 ICs, 5 connectors and 3 switches. It belongs with the radio and wireless and microcontroller boards boards and the ESP32 and RISC-V boards of this library.
Long-range Radiofrequency Core 0, ESP32 based LoRa RF devboard, specifically for navigation, communication, and node applications.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C3, C5, C11, C13, C15, C25, C26 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R7, R8, R13, R16 |
| 4 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C4, C6, C7, C8 |
| 4 | MountingHole_Pad_MP | MountingHole:MountingHole_2.2mm_M2_Pad_TopOnly | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R9, R10 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 4259-63 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U6, U8 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | u.FL | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J4, J5 |
| 1 | 0900FM15K0039 | RF_Converter:Balun_Johanson_0900FM15K0039 | FL1 |
| 1 | 1.2k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 100p | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 10p | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 15u | Inductor_SMD:L_1008_2520Metric | L2 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 39k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 470n | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 47n | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 600@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | BQ24075RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U3 |
| 1 | Battery | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_JST:JST_PHD_S8B-PHDSS_2x04_P2.00mm_Horizontal | J3 |
| 1 | EN | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | ESP32-C6-MINI-1 | ESP32_C6_MINI_1U_H4:XCVR_ESP32-C6-MINI-1U-H4 | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | SX1262IMLTRT | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | TVS1400DRV | Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U2 |
| 1 | TX32-33015S-32.000-X-R | TX32_33015S_32_000_X_R:OSC_TX32-33015S-32.000-X-R | Y1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

lnvke/DH-LRC-0
Long-range Radiofrequency Core 0, ESP32 based LoRa RF devboard, specifically for navigation, communication, and nodes.


Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!


AYUSH-pro-grammer/lora
A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them.

hlord2000/Sidewalk_Devkit
KiCad hardware design for a compact Nordic Semiconductor devkit built around an nRF54L15 target, nPM1300 power management, and an SX1262 sub-GHz radio front end.

jadenvv/NULL
A version of a flipperzero that has the same capabilities of Sub-GHz RF, IR, Wifi, and NFC/RFID

nickzentmayer/Messenger
This is a repository of hardware and software for a SX1262 radio based messageing device I made. This device supports a messaging protocol named Hermes that I created with insperation from protocols like TCP.
It measures 46 × 40 mm and has 4 copper layers, 0.19 mm thick.
60 parts, built around the SX1262IMLTRT, AP7361C-33E, BQ24075RGT and ESP32-C6-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lnvke/DH-LRC-0 repository on GitHub, at the commit this page was made from: the board is LRC-0/_restore_backup_2026-08-31T16-39-55-173/LRC-0.kicad_pcb and its schematic LRC-0/LRC-0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lnvke before reusing the design.