4 layers70 × 70 mm
IMU V100
embeddedalpha/IMU_V100
Inertial Measurement Unit based around STM32F407VGT6. This is a product development repo.
40 parts1
4 layers56.6 × 57.7 mm
MelexisToFcamera4layer
lnsru/melexisToFcamera4layer2Time of Flight camera using MLX75023 and MLX75123, 4 layers pcb done with KiCad
- Size
- 56.6 × 57.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 82
- Pads
- 633
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Mar 2019
- Updated
- 7 Jun 2019
Overview
MelexisToFcamera4layer is an open-source printed circuit board by lnsru, from the lnsru/melexisToFcamera4layer repository on GitHub, published under the MIT licence. It is a 4-layer board of 56.6 × 57.7 mm with 106 parts on 82 nets.
It is built around the CMOD A7-35T, MIC23050-GYML-TR and MIC23050-SYML-TR, with the LM27762DSS among its other parts. Its parts include 47 capacitors, 19 resistors, 13 connectors, 8 ICs and 6 inductors.
Main components
4
CMOD A7-35T
Breadboardable Artix-7 FPGA ModuleDigilentUncategorised
MIC23050-GYML-TR
MLF-8-EP(2x2)-40℃~+125℃@(TJ) 1 1.8V 2.7V~5.5V 4MHz 600mA Buck Buck Built-in Fixed Yes MLF-8-EP(2x2) DC-DC Converters ROHSMicrochip TechnologyDC-DC ConvertersMIC23050-SYML-TR
TDFN-8-EP(2x2)-40℃~+125℃@(TJ) 1 2.7V~5.5V 20uA 3.3V 4MHz 600mA Buck Built-in Fixed Light load efficient mode Step-down type Yes TDFN-8-EP(2x2) DC-DC Converters ROHSMicrochip TechnologyDC-DC Converters
LM27762DSS
WSON-12-EP(2x3)-40℃~+85℃ -5V~-1.5V、1.5V~5V 2.5Ω 2.7V~5.5V 250mA 2MHz 390uA Inverted Support WSON-12-EP(2x3) Charge Pumps ROHSTexas InstrumentsCharge Pumps
README
README.mdmelexisToFcamera4layer
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n | Capacitors_SMD:C_0603 | C4, C11, C13, C15, C27, C28, C30, C32, C33, C39, C40, C41, C45, C46, C47, C48 +6 |
| 10 | 10k | Resistors_SMD:R_0603 | R1, R2, R3, R4, R13, R15, R16, R17, R18, R19 |
| 10 | 10u | Capacitors_SMD:C_0603 | C2, C3, C7, C14, C17, C18, C20, C22, C29, C31 |
| 7 | 4u7 | Capacitors_Tantalum_SMD:CP_Tantalum_Case-R_EIA-2012-12_Reflow | CP1, CP2, CP5, CP10, CP19, CP21, CP25 |
| 6 | 4u7 | Capacitors_SMD:C_0603 | C35, C37, C38, C43, C44, C55 |
| 6 | Conn_01x01 | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | J1, J2, J3, J5, J7, J8 |
| 4 | Mounting_Hole_PAD-Mechanical | Mounting_Holes:MountingHole_3.2mm_M3_ISO7380 | MK1, MK2, MK3, MK4 |
| 3 | 1u | Resistors_SMD:R_1206_HandSoldering | L4, L5, L6 |
| 3 | 560p | Capacitors_SMD:C_0603 | C36, C42, C53 |
| 3 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J4, J6, J13 |
| 3 | Conn_01x04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J9, J10, J11 |
| 3 | L | Resistors_SMD:R_1206_HandSoldering | L1, L2, L3 |
| 2 | 100u | Capacitors_SMD:C_0603 | C26, C34 |
| 2 | 1u | Capacitors_SMD:C_0603 | C8, C12 |
| 2 | 2u2 | Capacitors_SMD:C_0603 | C23, C24 |
| 2 | MIC23050_GYML | footprintsForCamera:MIC23050 | U6, U7 |
| 1 | 10R | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | 150u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-R_EIA-2012-12_Reflow | CP6 |
| 1 | 27k | Resistors_SMD:R_0805_HandSoldering | R6 |
| 1 | 316k | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | 500 | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 511k | Resistors_SMD:R_0805_HandSoldering | R11 |
| 1 | 549k | Resistors_SMD:R_0805_HandSoldering | R12 |
| 1 | 953k | Resistors_SMD:R_0805_HandSoldering | R9 |
| 1 | ADP2164 | footprintsForCamera:ADP2164 | U2 |
| 1 | Cmod_A7 | footprintsForCamera:Cmod_A7 | U5 |
| 1 | Conn_01x22 | Pin_Headers:Pin_Header_Straight_1x22_Pitch1.27mm | J12 |
| 1 | D | Diodes_SMD:D_0805 | D1 |
| 1 | LM27762 | footprintsForCamera:LM27762 | U1 |
| 1 | MIC23050_SYML | footprintsForCamera:MIC23050 | U4 |
| 1 | MLX75023 | footprintsForCamera:MLX75023 | U3 |
| 1 | MLX75123 | footprintsForCamera:MLX75123 | U8 |
| 1 | X | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | Y | Resistors_SMD:R_0805_HandSoldering | R8 |
Questions
How big is the MelexisToFcamera4layer PCB?
It measures 56.6 × 57.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the MelexisToFcamera4layer use?
106 parts, built around the CMOD A7-35T, MIC23050-GYML-TR, MIC23050-SYML-TR and LM27762DSS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MelexisToFcamera4layer KiCad files?
From the lnsru/melexisToFcamera4layer repository on GitHub, at the commit this page was made from: the board is melexisToFcamera4layer/melexisToFcamera4layer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MelexisToFcamera4layer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers148 × 52 mm
- 6 layers50 × 50 mm
- 4 layers84.3 × 50.8 mm
PrecisionTimer RevG-1
SepticElectronics/High-Speed-Timer
High Speed Precision Timer 55ps/4ns
128 partsGPL-3.0 - 2 layers32 × 20 mm
- 4 layers21 × 27.9 mm
- 4 layers69.8 × 50.4 mm
- 2 layers49.8 × 39 mm
Motherboard
Apex-Ottawa-Team/hardware
All the PCBs and CAD files for our Apex weather balloon module
36 partsGPL-3.0