
Cam server
cruunnerr/CrallyBoard
Smart Home System / Alarm System / Input Output System for Raspberry Pi CM4

Multi-purpose counting system based on Beaglebone Black PRU
CountingPRU v2-3 is an open-source printed circuit board by lnls-sirius, from the lnls-sirius/counting-pru repository on GitHub. It is a 2-layer board of 160 × 100 mm with 94 parts on 181 nets, routed with 1,125 tracks and 68 vias.
It is built around the VIBLSD1-S5-S5-DIP, TS5A21366DCU and 74HC123D, with the BSR14 and DF01S-T among its other parts. Its parts include 31 resistors, 26 ICs, 14 capacitors, 6 connectors and 5 diodes.
PRU-based Counters
Brazilian Synchrotron Light Laboratory (LNLS/CNPEM) Controls Group
Author:
Patricia H. Nallin ( patricia.nallin@lnls.br )
Brief Description:
Designed as a PRU-based system, this product was developed in order to count trains of pulses during a period of time either from Bergoz Differential BLM or from LNLS Gamma Sensors (4-channel standard TTL signal), up to 14 MHz.
The project consists on:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistors_SMD:R_0805 | R19, R20, R21, R22, R27, R30, R31 |
| 6 | 1G125 | TO_SOT_Packages_SMD:SOT-353_SC-70-5_Handsoldering | U8, U9, U10, U11, U25, U26 |
| 6 | 741G74 | Controle:TSSOP-8 | U1, U2, U3, U4, U5, U6 |
| 4 | 0 | Resistors_SMD:R_0805 | R1, R2, R23, R24 |
| 4 | 33pF | Capacitors_SMD:C_0805 | C5, C8, C9, C10 |
| 4 | 4k7 | Resistors_SMD:R_0805 | R7, R8, R9, R10 |
| 3 | 1G04 | TO_SOT_Packages_SMD:SOT-353_SC-70-5_Handsoldering | U7, U12, U13 |
| 3 | 1k | Resistors_SMD:R_0805 | R5, R6, R18 |
| 3 | BSR14 | TO_SOT_Packages_SMD:SOT-23_Handsoldering | Q1, Q2, Q3 |
| 2 | 100 | Resistors_SMD:R_MELF_MMB-0207 | R11, R12 |
| 2 | 100 | Resistors_SMD:R_0805 | R3, R4 |
| 2 | 100n | Capacitors_SMD:C_0805 | C28, C29 |
| 2 | 120 | Resistors_SMD:R_0805 | R13, R14 |
| 2 | 1G08 | TO_SOT_Packages_SMD:SOT-353_SC-70-5 | U19, U22 |
| 2 | 1uF | Capacitors_SMD:C_0805 | C3, C4 |
| 2 | 330r | Resistors_SMD:R_0805 | R26, R29 |
| 2 | 741G74 | CONTROLE:TSSOP-8 | U23, U24 |
| 2 | CMC | Controle:Trafo_murata_SMD | T2, T3 |
| 2 | DF01S-T | Controle:RECT_BRIDGE | BR1, BR2 |
| 2 | LED | LEDs:LED_0805 | D10, D12 |
| 2 | Schottky | Diodes_SMD:D_SOD-323 | D9, D11 |
| 2 | TS5A21366 | Controle:VSSOP-8 | U14, U15 |
| 1 | Controle:LNLS_LOGO_Silk | ||
| 1 | 100nF | Capacitors_SMD:C_0805 | C7 |
| 1 | 100u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-T_EIA-3528-12_Reflow | C27 |
| 1 | 10u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C30 |
| 1 | 10uF | Capacitors_SMD:C_0805 | C6 |
| 1 | 180 | Resistors_SMD:R_0805 | R17 |
| 1 | 220k | Resistors_SMD:R_0805 | R28 |
| 1 | 4.7k | Resistors_SMD:R_0805 | R15 |
| 1 | 4.7uF | Capacitors_SMD:C_1210 | C2 |
| 1 | 470uF | Capacitors_SMD:CP_Elec_8x5.4 | C1 |
| 1 | 620 | Resistors_SMD:R_0805 | R16 |
| 1 | 74HC123 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U21 |
| 1 | 910k | Resistors_SMD:R_0805 | R25 |
| 1 | Ag9205 | Controle:9200-Silvertel | U16 |
| 1 | BBB | Controle:RJ45-STEWART | J1 |
| 1 | BERGOZ_01 | Controle:RJ45-STEWART | J4 |
| 1 | BERGOZ_02 | Controle:RJ45-STEWART | J3 |
| 1 | BeagleBone | Controle:BBB_Upside_Down | Beagle1 |
| 1 | C64AC | CONTROLE:Eurocard_template | |
| 1 | HardReset | CONTROLE:DIPSwitchSMD_1pos | JP1 |
| 1 | IN_ETHERNET | Controle:RJ45-STEWART | J2 |
| 1 | LED | Controle:LED_para_painel_KINGBRIGHT | D1 |
| 1 | LNLS 1 | Pin_Headers:Pin_Header_Angled_2x08_Pitch1.27mm | P1 |
| 1 | LNLS 2 | Pin_Headers:Pin_Header_Angled_2x08_Pitch1.27mm | P2 |
| 1 | MEV1D0512DC | Controle:MEV1D0512DC | U18 |
| 1 | Module-XFRMR-POE | Controle:module-xfrmr-poe | T1 |
| 1 | TS5A21366 | CONTROLE:VSSOP-8 | U20 |
| 1 | VIBLSD1-S5-S5-DIP | Controle:VIBLSD1-DIP | U17 |

cruunnerr/CrallyBoard
Smart Home System / Alarm System / Input Output System for Raspberry Pi CM4



oresat/oresat-cfc-hardware
Cirrrus Flux Camera hardware repository

oresat/oresat-end-cards
Repo for the OreSat +/-Z end cards (Card #1 and #20)

tobiasbaas/Roboterarm1
Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.

lnls-sirius/usb-rs485-converter
USB/RS-485 converter based on the FT232RL chip.

It measures 160 × 100 mm and has 2 copper layers, 1.6 mm thick.
94 parts, built around the VIBLSD1-S5-S5-DIP, TS5A21366DCU, 74HC123D and BSR14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lnls-sirius/counting-pru repository on GitHub, at the commit this page was made from: the board is hardware/v2-3/Kicad/CountingPRU_v2-3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lnls-sirius before reusing the design.