2 layers160 × 100.1 mm
2 layers160 × 100.1 mm
- Size
- 160 × 100.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 168
- Pads
- 399
- Tracks, vias
- 755, 23
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Jun 2018
- Updated
- 14 May 2021
Overview
VBC v2-0 is an open-source printed circuit board by lnls-sirius, from the lnls-sirius/vacuum-bbb-controller repository on GitHub. It is a 2-layer board of 160 × 100.1 mm with 89 parts on 168 nets, routed with 755 tracks and 23 vias.
It is built around the IL3685E, DCR010505U and FT232RL, with the TS5A21366DCU and BC817 among its other parts. Its parts include 35 resistors, 14 diodes, 11 capacitors, 10 connectors and 5 ICs.
Main components
5
IL3685E
SOIC-16-300milSOIC-16-300mil Isolated RS-485/422 Transceivers ROHSNVEIsolated RS-485/422 TransceiversDCR010505U
SOP-12-300mil-40℃~+85℃ 1kV 400kHz SOP-12-300mil Isolated DC/DC Converters ROHSTexas InstrumentsDC-DC Converters
FT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
TS5A21366DCU
VSSOP-8-0.5mm-40℃~+85℃ 1.65V~5.5V 1:1 243ns 260MHz 33pF 49ns 750mΩ VSSOP-8-0.5mm Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, Multiplexers
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
README
README.mdvacuum-bbb-controller
Graphical interface ./software/pydm/pydm_1.2/README.md
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 4k7 | Resistors_SMD:R_0805_HandSoldering | R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 |
| 4 | 10k | Resistors_SMD:R_0805_HandSoldering | R21, R23, R24, R35 |
| 4 | 10kΩ | Resistors_SMD:R_0805_HandSoldering | R30, R31, R32, R33 |
| 4 | 1k | Resistors_SMD:R_0805_HandSoldering | R1, R2, R3, R4 |
| 4 | BC817 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | D | Diodes_SMD:D_0805 | D1, D2, D3, D4 |
| 4 | LED green | LEDs:LED_0805_HandSoldering | D5, D6, D7, D8 |
| 4 | LED red | LEDs:LED_0805_HandSoldering | D9, D10, D11, D12 |
| 4 | RELAY_Metaltex | Relays_THT:Relay_DPDT_Omron_G5V-2 | K1, K2, K3, K4 |
| 4 | RJ11 | Controle:RJ11-4P4C-HIROSE_2 | J1, J2, J3, J4 |
| 3 | 100nF | Capacitors_SMD:C_0805_HandSoldering | C3, C6, C10 |
| 2 | 330Ω | Resistors_SMD:R_0805_HandSoldering | R28, R29 |
| 2 | 390Ω | Resistors_SMD:R_0805_HandSoldering | R26, R27 |
| 2 | 4.7µF | Capacitors_SMD:C_1210_HandSoldering | C2, C7 |
| 2 | 47nF | Capacitors_SMD:C_0805_HandSoldering | C5, C9 |
| 2 | 5k | Resistors_SMD:R_0805_HandSoldering | R22, R34 |
| 2 | LED | Controle:LED_para_painel_KINGBRIGHT | D13, D14 |
| 2 | RJ25 | Conversor USB-RS485:RJ25 | P3, P4 |
| 2 | TS5A21366 | Controle:VSSOP-8 | U1, U2 |
| 1 | Controle:SMA_Molex_73251-2201 | C1 | |
| 1 | Controle:BEAGLEBONEBLACK | ||
| 1 | Controle:BEAGLEBONEBLACK_(fixation_holes) | ||
| 1 | Connectors_Terminal_Blocks:TerminalBlock_Altech_AK300-2_P5.00mm | J6 | |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 10µF | Capacitors_SMD:C_0805_HandSoldering | C11 |
| 1 | 1µF | Capacitors_SMD:C_0805_HandSoldering | C8 |
| 1 | 220Ω | Resistors_SMD:R_0805_HandSoldering | R25 |
| 1 | 40Ω @ 100 MHz | Resistors_SMD:R_0805_HandSoldering | FB1 |
| 1 | Conn_01x01 | Controle:Mean_Well_RS15 | J7 |
| 1 | DCR010505U | Conversor USB-RS485:DCR010505U | U5 |
| 1 | FT232RL | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U3 |
| 1 | IL3685 | Housings_SOIC:SOIC-16_7.5x10.3mm_Pitch1.27mm | U4 |
| 1 | LOGO | Controle:LNLS_LOGO_Silk | G*** |
| 1 | RJ25 | Controle:RJ25_(conversor) | J5 |
| 1 | SW_DIP_2 | Controle:DIP_switch_(2_positions) | SW1 |
| 1 | USB Mini-B | Pin_Headers:Pin_Header_Straight_2x06_Pitch2.54mm | P2 |
The 88 most common of 89 parts.
More from lnls-sirius/vacuum-bbb-controller
1Similar boards
- 2 layers87 × 70.8 mm
Conversor USB RS485
lnls-sirius/usb-rs485-converter
USB/RS-485 converter based on the FT232RL chip.
37 parts - 4 layers99.8 × 94.6 mm
Cfc processor
oresat/oresat-cfc-hardware
Cirrrus Flux Camera hardware repository
196 parts2CERN-OHL-S-2.0 - 4 layers99.8 × 94.6 mm
Oresat1-plusz end card
oresat/oresat-end-cards
Repo for the OreSat +/-Z end cards (Card #1 and #20)
109 parts2 - 2 layers160 × 100 mm
CountingPRU v2-3
lnls-sirius/counting-pru
Multi-purpose counting system based on Beaglebone Black PRU
94 parts - 4 layers69.8 × 50.4 mm
- 2 layers147 × 92 mm
Van
blinken/vandal
An ESP32-based lighting control system for campervans (or anything else)
227 parts6GPL-3.0 - 2 layers143.5 × 110.2 mm
Test platform
kwiecinski/MultiChem-Battery-Tester
Multi-chemistry (Lithum, PB and others) battery charger/discharger with capacitance measurement and discharge graph for diffrent charge/load currents.
151 parts2MIT - 2 layers190.5 × 61 mm
Questions
How big is the VBC v2-0 PCB?
It measures 160 × 100.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VBC v2-0 use?
89 parts, built around the IL3685E, DCR010505U, FT232RL and TS5A21366DCU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VBC v2-0 KiCad files?
From the lnls-sirius/vacuum-bbb-controller repository on GitHub, at the commit this page was made from: the board is hardware/kicad/VBC v2.0/VBC_v2-0.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VBC v2-0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask lnls-sirius before reusing the design.