2 layers69 × 89 mm
2 layers140 × 30 mm
FumeExtractorBoard v1
lizard-electronics/Soldering_Fume_ExtractorPortable soldering fume extractor based on an ATmega328P MCU.
- Size
- 140 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 82
- Nets
- 58
- Pads
- 228
- Tracks, vias
- 383, 399
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Oct 2022
- Updated
- 3 Apr 2024
Overview
FumeExtractorBoard v1 is an open-source printed circuit board by lizard-electronics, from the lizard-electronics/Soldering_Fume_Extractor repository on GitHub. It is a 2-layer board of 140 × 30 mm with 82 parts on 58 nets, routed with 383 tracks and 399 vias.
It is built around the ATMEGA328P-AU, TP6841S6-A and AO3400A, with the AO3401A, SS14 and SS8050 among its other parts. Its parts include 17 resistors, 16 capacitors, 6 connectors, 4 switches and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TP6841S6-A
SOT-23-6-40℃~+125℃@(TA) 1 4.5V~40V 800kHz 800mA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHSTECH PUBLICDC-DC Converters
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdSoldering Fume Extractor
[In Development...]
Portable soldering fume extractor based on an ATmega328P MCU.
Parts
82| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C201, C302, C303, C304, C307, C308, C401, C402 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R403, R404, R501, R504, R601 |
| 4 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C203, C204, C205, C501 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H701, H702, H703, H704 |
| 3 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT201, NT501, NT601 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C305, C306 |
| 2 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R503, R602 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R204, R302 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R401, R402 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | SW_SPDT | Button_Switch_THT:SW_Slide_1P2T_CK_OS102011MS2Q | SW201, SW402 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C202 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201 |
| 1 | 105k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R202 |
| 1 | 10uH | Inductor_SMD:L_Sunlord_MWSA0518_5.4x5.2mm | L201 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L301 |
| 1 | 120 @ 100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB201 |
| 1 | 12V_TP | TestPoint:TestPoint_Pad_D1.5mm | TP201 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y301 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R505 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R203 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C301 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R502 |
| 1 | 5V_TP | TestPoint:TestPoint_Pad_D1.5mm | TP202 |
| 1 | 800mA | Fuse:Fuse_1812_4532Metric | F201 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q601 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q201 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U301 |
| 1 | AVR-ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J303 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J201 |
| 1 | G*** | kibuzzard-63330D54 | kibuzzard-63330D54 |
| 1 | G*** | kibuzzard-63331390 | kibuzzard-63331390 |
| 1 | G*** | kibuzzard-633311A9 | kibuzzard-633311A9 |
| 1 | G*** | kibuzzard-6333156D | kibuzzard-6333156D |
| 1 | G*** | kibuzzard-6334A8D3 | kibuzzard-6334A8D3 |
| 1 | G*** | kibuzzard-63331553 | kibuzzard-63331553 |
| 1 | G*** | kibuzzard-63330DD6 | kibuzzard-63330DD6 |
| 1 | G*** | kibuzzard-63330FE0 | kibuzzard-63330FE0 |
| 1 | G*** | kibuzzard-63330C57 | kibuzzard-63330C57 |
| 1 | GND_TP | TestPoint:TestPoint_Pad_D1.5mm | TP203 |
| 1 | Green | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D201 |
| 1 | JST-PH-4-F | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J601 |
| 1 | JST-PH-6-F | Connector_JST:JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal | J501 |
| 1 | Jumper 4-Pin Fan | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP602 |
| 1 | Jumper 5V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP201 |
| 1 | Jumper Fan Driver | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP601 |
| 1 | NetTie_3_Tee | NetTie:NetTie-3_SMD_Pad0.5mm | NT502 |
| 1 | Orange | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D301 |
| 1 | PinHeader_2.54mm | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J302 |
| 1 | PinHeader_2.54mm | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J301 |
| 1 | SS14 | Diode_SMD:D_SMA | D601 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q501 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW301 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW401 |
| 1 | TP6841S6-A | Package_TO_SOT_SMD:SOT-23-6 | U201 |
The 81 most common of 82 parts.
Similar boards
- 2 layers89 × 74 mm
- 2 layers70 × 65 mm
Fluepdot
Fluepke/Fluepdot
Project for controlling Annax flipdot panels used by the Berliner Verkehrsbetriebe
116 parts17AGPL-3.0 - 2 layers150 × 100 mm
SmartCube
kokhaie/Smart-Refrigerator-Demo
The KiCad-generated BOM is mirrored into the documentation site under docs/ so it can be published through GitHub Pages.
91 parts - 4 layers56 × 56 mm
Stepper driver
matthewlai/ESP32Stepper
This is the PCB design and firmware for a Trinamic TMC2590-based stepper motor driver with an ESP32 microcontroller.
116 parts5Apache-2.0 - 4 layers135 × 84 mm
Stepper with TMC2209 controller board V1
JasonHEngineering/DIY-Robot-Arm-V3
1) Along with using with TMC2209 motor drivers, I have removed R8, R15, R16, R17, R18, R19 because the R value was accidentally too high. I have shorted R8, R16, R17, and left open R15, R18, R19.
95 parts2 - 2 layers56.4 × 94.2 mm
- 4 layers76 × 40 mm
ENGG3000-BaseStation
TheWasian/Ultrasonic-Whack-A-Mole
An interactive 3D Whack-A-Mole game powered by ESP32 microcontrollers and ultrasonic sensors, using real-time motion tracking to turn physical movement into gameplay.
60 parts2MIT
Questions
How big is the FumeExtractorBoard v1 PCB?
It measures 140 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FumeExtractorBoard v1 use?
82 parts, built around the ATMEGA328P-AU, TP6841S6-A, AO3400A and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FumeExtractorBoard v1 KiCad files?
From the lizard-electronics/Soldering_Fume_Extractor repository on GitHub, at the commit this page was made from: the board is 1_Hardware/PCB/FumeExtractorBoard_v1/FumeExtractorBoard_v1.kicad_pcb and its schematic 1_Hardware/PCB/FumeExtractorBoard_v1/FanDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FumeExtractorBoard v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask lizard-electronics before reusing the design.