

Esp32-generic board
Multi purpose ESP32 breakout board
- Size
- 25.4 × 63.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 68
- Pads
- 180
- Tracks, vias
- 627, 62
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 5 Nov 2019
- Updated
- 11 Nov 2019
Overview
Esp32-generic board is an open-source printed circuit board by liyanage, from the liyanage/esp32-generic-board repository on GitHub. It is a 2-layer board of 25.4 × 63.5 mm with 25 parts on 68 nets, routed with 627 tracks and 62 vias.
It is built around the ESP32-WROOM-32, CH340G and MIC5219-3.3YM5. Its parts include 7 capacitors, 5 resistors, 4 ICs, 4 connectors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
3ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesCH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersMIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorised
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | Conn_01x19 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | J3, J4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | |||
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 10uH | Inductor_SMD:L_Vishay_IHLP-2020 | L1 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 350uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 5v_source | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | LTC3630MSE | Package_SO:Linear_MSOP-12-16-1EP_3x4mm_P0.5mm | U2 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles | J1 |
| 1 | WAGO_2060-451_998-404 | kicad-library-liyanage:WAGO_2060-451_998-404 | J2 |
More from liyanage/esp32-generic-board
1- 2 layers25.4 × 63.5 mm

Similar boards
- 2 layers155 × 60 mm

- 2 layers67.8 × 55 mm

- 2 layers100 × 100 mm

- 2 layers100.4 × 99.2 mm

Espdroneea
sushrutchhatkuli/Custom-ESP32-drone-PCB
Designed a custom ESP32-WROOM-32–based drone flight controller PCB featuring USB-C charging, regulated 3.3 V power delivery, and onboard IMU sensing using the MPU-6050.
121 parts1 - 2 layers151.6 × 151.7 mm

Dron V1
FrancoStrappazzon/Drones
Repositorio para proyectos de drones, desde el más simple hasta mas complejos
70 parts - 2 layers50 × 50 mm

- 2 layers45 × 45 mm

- 2 layers

Questions
How big is the Esp32-generic board PCB?
It measures 25.4 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esp32-generic board use?
25 parts, built around the ESP32-WROOM-32, CH340G and MIC5219-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32-generic board KiCad files?
From the liyanage/esp32-generic-board repository on GitHub, at the commit this page was made from: the board is pcb/esp32-generic-board/esp32-generic-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32-generic board design in my own project?
Its repository states no licence, so its author keeps all rights: ask liyanage before reusing the design.