2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0
2 layers76.2 × 101.6 mm
Cuebox
literallycat/cueboxCueBox
- Size
- 76.2 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 40
- Pads
- 134
- Tracks, vias
- 141, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Nov 2022
- Updated
- 20 Nov 2022
Overview
Cuebox is an open-source printed circuit board by literallycat, from the literallycat/cuebox repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 76.2 × 101.6 mm with 21 parts on 40 nets, routed with 141 tracks and 0 vias.
Its parts include 8 resistors, 4 capacitors, 4 switches and 1 IC. It belongs with the RP2040 boards of this library.
README
README.mdcuebox
CueBox
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R2, R4, R6, R16 |
| 4 | 100nF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C0, C1, C2, C3 |
| 4 | MountingHole | MountingHole:MountingHole_3mm_Pad | H1, H2, H3, H4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1, SW2, SW3, SW4 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R3, R5 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R1 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical | R7 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
Questions
How big is the Cuebox PCB?
It measures 76.2 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cuebox use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cuebox KiCad files?
From the literallycat/cuebox repository on GitHub, at the commit this page was made from: the board is cuebox.kicad_pcb and its schematic cuebox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cuebox design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
