Skip to the content
2 layers173 × 88.5 mmAC30 SMT, the printed circuit board in 3D

AC30 SMT

linuxha/AC30

A reproduction SWTPC AC-30 Cassette Interface

Size
173 × 88.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
122
Nets
156
Pads
497
Tracks, vias
1,704, 280
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
8 Oct 2026
Updated
12 Oct 2026

Overview

AC30 SMT is an open-source printed circuit board by linuxha, from the linuxha/AC30 repository on GitHub. It is a 2-layer board of 173 × 88.5 mm with 122 parts on 156 nets, routed with 1,704 tracks and 280 vias.

It is built around the 1N4148W, MMBT5088 and MMBT5087. Its parts include 46 resistors, 23 capacitors, 15 ICs, 12 diodes and 11 transistors.

Main components

3

README

README.md

SWTPC AC30 Cassette Interface

SWTPC AC30 Reproduction

A reproduction SWTPC AC-30 Cassette Interface

Description

I have a couple of Motorola MC6800, MC6802, and MC6809 machines from the 1970's. And I wanted to setup a typical cassette player/recorder setup to save and load code written on these machines.

Note: 2026/10/11 - I hate the way Claude built the human readable schematics. A lot of net lists instead of a nice arrow to the net list. Anyway, so after a bit of double checking I've ordered 5 SMT boards and we'll now see the quality of the designs.

2026/10/11 - The schematics are now drawn with real wires, block by block, instead of a label on every pin. Readable PDFs and PNG images of every sheet and functional block are in kicad-smt/schematic/ (SMT) and kicad/schematic/ (through-hole), for example the SMT modulator:

SMT schematic: modulator block

2026/10/10 - Both boards (through-hole kicad/AC30 and SMT kicad-smt/AC30_SMT) now wire the front panel (switches, LEDs, motor jacks, MIC A/B and EAR A/B jacks) to labeled through-hole wire pads instead of the J1/J2 Molex connectors. Board details are in AC30-settings.md and AC30-SMT-settings.md; the parts list is docs/AC30-BOM.md, with Kicad BOMs in kicad/AC30-BOM.csv and kicad-smt/AC30_SMT-BOM.csv.

Board sizes are now 173.0 x 126.5 mm (6.8" x 5.0") through-hole and 173.0 x 88.5 mm (6.8" x 3.5") SMT. Gerbers and drill files for both boards are ready for the board house: kicad/AC30-gerbers.zip (through-hole) and kicad-smt/AC30_SMT-gerbers.zip (SMT, including the top paste layer for a stencil). kicad/tools/build.sh regenerates them on every build, or run kicad/tools/gerbers.sh (add smt for the SMT board).

The SMT board also has a pick-and-place position file, kicad-smt/AC30_SMT-top-pos.csv (SMD parts only, mm, origin at the board's bottom-left corner), to go with the BOM for an assembly house. The through-hole board's layout was re-placed so a fresh build routes completely again; the build now tries other placements automatically if routing ever comes up short. Both boards now have a GND copper fill on both layers (thermal reliefs on the GND pads, so they're still easy to hand-solder; details in the settings files above), added automatically by the build after routing. The motor and relay lines (MOTOR_1A/1B/2A/2B, RELAY_1/2) now use the same 0.6 mm tracks as the power rails, good for roughly 1.5 A. Known issues, including what to check before ordering boards, are listed in KNOWN-ISSUES.md.

2026/10/09 - I've update the PCB to add the mod/demod circuits and a Molex for the power. Additionally I had a new SMT version created.

2026/10/08 - This is my first go around with Claude, Kicad and FreeCAD and creating a PCB to be sent off as Gerbers. I have a lot of inspecting to do. But for a 1st go this is scary impressive.

Claude created Kicad files

I gave Claude the following prompts:

text
Create a kicad schematic for docs/AC30-BOM.md docs/ac30_schematica.jpg

and

text
Save what you have but provide solder pads and labels for the missing power and mod/demod

and

text
Now create the pcb from the schematics. Minimize the board size but leave a safe boarder along the edge.

After this I use a few suggested prompts.

Here's what the inside of the Original SWTPC AC30:

SWTPC AC30 Cassette Interface insides

I'd estimate the board to be about 9" x 9" (inches) in size. Here's the schematics I gave Claude:

SWTPC AC30 Cassette Interface schematic

I gave it the AC30/docs/AC30-BOM.md file (simple markdown text file).

Claude started churning and created a 'schematic' (doesn't look like the above, hard to read) and I imported it into the PCB editor. Then didn't make any changes. Instead I let Claude do the rerouting.

I then found out I needed to upgrade Kicad to 10.7 and FreeCAD 26.3 so Claude could create Python 3.11 scripts to build a schematic, the PCB and routing. That was messy as I have Debian Trixie and the latest wants Debian Forky. Anyway, this is the final 1st round attempt. More cleanup to do yet before I ship off the Gerbers.

I'd estimate the size of the new PCB to be about 3.5" x 7" (inches).

New AC30 Cassette Interface SMT part placement

New AC30 Cassette Interface SMT Red/Blue

So after several hours, including the Kicad/FreeCAD SNAFU, those are the results. The TPx are where I just dumped a bunch of jumpers I hadn't decided on. I'll fix those later. While it's not done it's a huge jump. It would have taken me about two weeks to get all the parts on the schematic, connections defined and PCB routed.

Credits

I stole this from Deramp's AC30 (Mike) site. And he saved it from Mike Holley's original SWTPC site.

Links

Parts

122
QtyValueFootprintReferences
2410KResistor_SMD:R_0805_2012MetricR2, R3, R11, R12, R15, R19, R20, R21, R22, R27, R28, R29, R32, R33, R34, R36 +8
101N4148WDiode_SMD:D_SOD-123D1, D2, D4, D5, D6, D7, D8, D9, D10, D11
7100KResistor_SMD:R_0805_2012MetricR8, R17, R18, R23, R24, R25, R26
7MMBT5088Package_TO_SOT_SMD:SOT-23Q1, Q2, Q4, Q5, Q6, Q7, Q8
61000pFCapacitor_SMD:C_0805_2012MetricC1, C6, C12, C13, C14, C15
6470Resistor_SMD:R_0805_2012MetricR7, R30, R31, R35, R37, R43
4MMBT5087Package_TO_SOT_SMD:SOT-23Q3, Q9, Q10, Q11
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
30.1uFCapacitor_SMD:C_0805_2012MetricC23, C24, C25
34013Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC1, IC5, IC8
3470pFCapacitor_SMD:C_0805_2012MetricC11, C19, C20
20.01uFCapacitor_SMD:C_0805_2012MetricC5, C18
20.022uFCapacitor_SMD:C_0805_2012MetricC3, C8
20.047uFCapacitor_SMD:C_0805_2012MetricC7, C9
222KResistor_SMD:R_0805_2012MetricR13, R14
24001Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC2, IC11
24053Package_SO:SOIC-16_3.9x9.9mm_P1.27mmIC6, IC14
24070Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC3, IC13
2G6K-2F-Y 5VRelay_SMD:Relay_DPDT_Omron_G6K-2F-YRLY1, RLY2
1100uF 16VCapacitor_SMD:CP_Elec_6.3x7.7C16
110uF 10V tantCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC17
11488Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC15
11489Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC12
11uF 15VCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC4
12.2KResistor_SMD:R_0805_2012MetricR5
12000pFCapacitor_SMD:C_0805_2012MetricC2
120K trimPotentiometer_SMD:Potentiometer_Bourns_3314G_VerticalR16
12700pFCapacitor_SMD:C_0805_2012MetricC10
1330Resistor_SMD:R_0805_2012MetricR4
1330KResistor_SMD:R_0805_2012MetricR10
133KResistor_SMD:R_0805_2012MetricR1
14.7KResistor_SMD:R_0805_2012MetricR6
14023Package_SO:SOIC-14_3.9x8.7mm_P1.27mmIC9
14049Package_SO:SOIC-16_3.9x9.9mm_P1.27mmIC7
14558Package_SO:SOIC-8_3.9x4.9mm_P1.27mmIC4
147KResistor_SMD:R_0805_2012MetricR38
1555Package_SO:SOIC-8_3.9x4.9mm_P1.27mmIC10
1BZT52C4V7 4.7VDiode_SMD:D_SOD-123D3
1Computer interface (COMP)Connector_Molex:Molex_KK-396_A-41791-0010_1x10_P3.96mm_VerticalJ3
1Control interfaceConnector_Molex:Molex_KK-396_A-41791-0015_1x15_P3.96mm_VerticalJ4
1EARConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ15
1LEDLED_SMD:LED_1206_3216MetricD18
1LEDSConnector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_VerticalJ2
1MICConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ14
1MOTORConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ13
1Power inputConnector_Molex:Molex_KK-396_A-41791-0006_1x06_P3.96mm_VerticalJ12
1SWITCHESConnector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_VerticalJ1
1Terminal interface (TERM)Connector_Molex:Molex_KK-396_A-41791-0010_1x10_P3.96mm_VerticalJ5

More from linuxha/AC30

2
  • 2 layers173 × 126.5 mmAC30, the printed circuit board in 3D

    AC30

    linuxha/AC30

    A reproduction SWTPC AC-30 Cassette Interface

    122 parts
  • 2 layers173 × 97.5 mmAC30, the printed circuit board in 3D

    AC30

    linuxha/AC30

    A reproduction SWTPC AC-30 Cassette Interface

    84 parts

Similar boards

  • 2 layers40 × 110 mmHerford, the printed circuit board in 3D

    Herford

    niektb/sluisbrinkie-eurorack-published

    Published Modules of the Sluisbrinkie project

    110 parts34
  • 2 layers17 × 10.8 mmLe pre et le boost, the printed circuit board in 3D

    Le pre et le boost

    rockola/le-pre-et-le-boost

    SMD FET preamp and booster on one PCB

    16 parts1
  • 4 layers99 × 53.3 mmPSLab, the printed circuit board in 3D

    PSLab

    fossasia/pslab-hardware

    PSLab Hardware Design and Schematics https://pslab.io

    199 parts1.7kApache-2.0
  • 2 layers208.8 × 396.9 mmFerris, the printed circuit board in 3D

    Ferris

    pierrechevalier83/ferris

    A low profile split keyboard designed to satisfy one single use case elegantly

    145 parts1.3k
  • 2 layers285.5 × 95 mmReviung46 ver1 1, the printed circuit board in 3D

    Reviung46 ver1 1

    gtips/reviung

    The REVIUNG41 is 41-key column staggered keyboard.

    119 parts517MIT
  • 4 layers95.6 × 73.6 mmMathpad, the printed circuit board in 3D

    Mathpad

    Summa-Cogni/Mathpad

    A mathematical keypad for students and professionals

    93 parts243
  • 2 layers141.5 × 83 mmRolio, the printed circuit board in 3D

    Rolio

    MickiusMousius/Rolio46Keyboard

    A split wireless keyboard based on the Corne and Sofle

    110 parts236MIT
  • 6 layers160 × 100 mmAdrmu6layer, the printed circuit board in 3D

    Adrmu6layer

    marcoreps/ADRmu

    ADR1000 10V standard

    240 parts149

Questions

How big is the AC30 SMT PCB?

It measures 173 × 88.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the AC30 SMT use?

122 parts, built around the 1N4148W, MMBT5088 and MMBT5087. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the AC30 SMT KiCad files?

From the linuxha/AC30 repository on GitHub, at the commit this page was made from: the board is kicad-smt/AC30_SMT.kicad_pcb and its schematic AC30-Kicad/AC30.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the AC30 SMT design in my own project?

Its repository states no licence, so its author keeps all rights: ask linuxha before reusing the design.