2 layers75.5 × 71 mm
2 layers83.8 × 52.1 mm
RemotePlugSocket
Linoprit/RemotePlugSocketPlug Socket, that can be controlled by Mqtt-Messages. Especially designed for HomeAssistant.
- Size
- 83.8 × 52.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 38
- Pads
- 71
- Tracks, vias
- 110, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Nov 2024
- Updated
- 8 Dec 2024
Overview
RemotePlugSocket is an open-source printed circuit board by Linoprit, from the Linoprit/RemotePlugSocket repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 83.8 × 52.1 mm with 14 parts on 38 nets, routed with 110 tracks and 0 vias.
It is built around the ESP32-DEVKITC-VE and BME280. Its parts include 7 connectors, 5 resistors, 1 capacitor and 1 IC. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
Main components
2README
README.mdRemotePlugSocket
Plug Socket, that can be controlled by Mqtt-Messages. Especially designed for HomeAssistant.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R4 |
| 2 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 1 | 1-Wire CH1 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J4 |
| 1 | 470u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | BME280 | Connector_Molex:Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J1 |
| 1 | Button | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J6 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U1 |
| 1 | LED_Debug | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J7 |
| 1 | LED_Status | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J3 |
| 1 | Power | Connector_Molex:Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical | J5 |
| 1 | Relay_Module | Connector_Molex:Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical | J2 |
Questions
How big is the RemotePlugSocket PCB?
It measures 83.8 × 52.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RemotePlugSocket use?
14 parts, built around the ESP32-DEVKITC-VE and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RemotePlugSocket KiCad files?
From the Linoprit/RemotePlugSocket repository on GitHub, at the commit this page was made from: the board is Schematics/RemotePlugSocket/RemotePlugSocket.kicad_pcb and its schematic Schematics/RemotePlugSocket/RemotePlugSocket.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RemotePlugSocket design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers83.8 × 52.1 mm
ThetaProbe
Linoprit/ThetaMon3
Measures temperatures with several DS1820 sensors and controlls a heater.
15 partsGPL-3.0 - 2 layers43 × 63 mm
- 4 layers100 × 120 mm
- 2 layers
- 2 layers103.8 × 50 mm
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm
SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm
ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42