4 layers45 × 89 mm
4 layers100 × 120 mm
Drone1
Rohith-4567/drone1- Size
- 100 × 120 mm
- Copper layers
- 4
- Thickness
- 1.26 mm
- Parts
- 28
- Nets
- 88
- Pads
- 158
- Tracks, vias
- 133, 3
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 27 Jun 2025
- Updated
- 30 May 2026
Overview
Drone1 is an open-source printed circuit board by Rohith-4567, from the Rohith-4567/drone1 repository on GitHub. It is a 4-layer board of 100 × 120 mm with 28 parts on 88 nets, routed with 133 tracks and 3 vias.
It is built around the ESP32-DEVKITC-VE, MP1584EN and BME280, with the HMC5883L among its other parts. Its parts include 9 ICs, 5 resistors, 2 connectors and 1 diode. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-DEVKITC-VE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesMP1584EN
SOIC-8-EP-20℃~+85℃ 1 100kHz~1.5MHz 4.5V~28V Adjustable Buck Buck Built-in SOIC-8-EP DC-DC Converters ROHSMonolithic Power SystemsDC-DC Converters
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
HMC5883L
LGA-16_L3.0-W3.0-P0.50LPCC-16(3x3) New Arrivals ROHSHoneywellUncategorised
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.5mm | H1, H2, H3, H4, H5, H6, H7, H8 |
| 3 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3 |
| 2 | mp1584 | mp1584:mp1584_footprint | U6, U7 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 3.3K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | APA-106-F5 | LED_THT:LED_D5.0mm-4_RGB | D1 |
| 1 | BME280 | BME280_module:BME280_footprint | U4 |
| 1 | Battery | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | BT1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_1.00mm:PinHeader_1x08_P1.00mm_Vertical | J2 |
| 1 | ESP-32_DevkitC | RF_Module:ESP32-C3-DevKitM-1 | J1 |
| 1 | Flysky fs-a8s | Flysky fs-a8s:Flysky fs-a8s_footprint | U8 |
| 1 | GY-NEO6MV2 | GY-NEO6MV2_footprint:GY-NEO6MV2foot | U3 |
| 1 | HMC5883L | HMC5883L:HMC5883L_footprint | U5 |
| 1 | LOGO | Graphics:biggerdrone | G*** |
| 1 | LOGO | Graphics:words | G*** |
| 1 | Rasberry Pi 0W | Rasberry Pi 0W footprint:MODULE_SC0065 | U1 |
| 1 | ~ | MPU6500:MPU6500 | U9 |
| 1 | ~ | 4x1_ESC:4x1_ESC | U10 |
Questions
How big is the Drone1 PCB?
It measures 100 × 120 mm and has 4 copper layers, 1.26 mm thick.
What parts does the Drone1 use?
28 parts, built around the ESP32-DEVKITC-VE, MP1584EN, BME280 and HMC5883L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Drone1 KiCad files?
From the Rohith-4567/drone1 repository on GitHub, at the commit this page was made from: the board is PCB/Drone_1.kicad_pcb and its schematic PCB/Drone_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Drone1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Rohith-4567 before reusing the design.
Similar boards
- 2 layers85 × 155 mm
Esp32-fan controller
merlindorin/esp32-fan-controller
A small KiCad board to keep my home server cabinet cool. 4 PWM fans, 4 temperature probes, one ESP32.
38 parts8MIT - 2 layers110 × 110 mm
FloorHeatingCentral
kvoit/FloorHeatingController_HW
Contoller board for up to 10 floor heading circuits. Thermostats via MQTT or 868MHz RF (to be developed). Changed from 1-Wire to 868MHz connectivity in version 2.0.
72 parts2Apache-2.0 - 2 layers
EV Guardian Carrier
nandan63625/EV-Fleet-Management-System
IoT-based EV Fleet Management System for real-time vehicle monitoring and tracking.
23 parts - 2 layers40.6 × 91.4 mm
- 2 layers100 × 60 mm
- 2 layers75.5 × 71 mm
- 2 layers83.8 × 52.1 mm
RemotePlugSocket
Linoprit/RemotePlugSocket
Plug Socket, that can be controlled by Mqtt-Messages. Especially designed for HomeAssistant.
14 partsGPL-3.0