
Ris-26 igniter v8 pcb v4
linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

Remote Igniting System 26, Avionics, ISP, NCKU
Ris-26 receiver v2 is an open-source printed circuit board by linkkwisteria-droid, from the linkkwisteria-droid/ris-26 repository on GitHub. It is a 2-layer board of 115 × 110 mm with 58 parts on 80 nets, routed with 387 tracks and 56 vias.
It is built around the 74HC08D-TD and SB520. Its parts include 28 resistors, 10 ICs, 8 transistors, 7 capacitors and 2 diodes. It belongs with the ESP8266 boards of this library.
Info
- Author: 林冠宏
- Built Date: 2026-07-08
- Summary: 一個RIS-26專案的README.md檔案,路徑為 "ris-26/"。
RIS-26,全名為 "Remote Ignition System 26,是 NCKUISP航電組 在 2026-01 開始的專案,主要負責人為 林冠宏,此專案目標為製造一個遙控點火系統。
ris-26
├─doc # 文件
├─draw-io # draw.io 網站的檔案
├─kicad # kicad 檔案,依照子系統分類
├─ltspice # SPICE 模擬軟體 LTSPICE
├─solidwork # 3D CAD
└─vscode # vscode 檔案,依照子系統分類修碰
| No. | Name | |
|---|---|---|
| 01 | 林冠宏 | linkk.wisteria@gmail.com |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R8, R9, R13, R16, R17 |
| 4 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R6, R18, R21 |
| 3 | 0.1uF | ris-26_footprint_lib:CERAMIC_C_PIN | C6, C8, C10 |
| 3 | 100K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R7, R15 |
| 3 | 150 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26, R27, R28 |
| 3 | 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R14, R32 |
| 3 | NPN | ris-26_footprint_lib:SOT95P237X125-3N | Q3, Q5, Q9 |
| 3 | PMOS_FQU11P06 | ris-26_footprint_lib:TO228P680X240X837-3 | Q1, Q6, Q8 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R25 |
| 2 | 4.3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R34 |
| 2 | 560uF/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 74AHC1G04SE-7_IC | ris-26_footprint_lib:SOT65P210X110-5N | U3, U6 |
| 2 | HCM0630-220M | ris-26_footprint_lib:HCM0630 | L1, L3 |
| 2 | NMOS_IRF630 | ris-26_footprint_lib:TO-220 | Q2, Q4 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 27uF/16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 3.9K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 47 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 47K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23 |
| 1 | 6.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 74HC08D-T_IC | ris-26_footprint_lib:SOIC127P600X175-14N | U4 |
| 1 | 8200uF | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C3 |
| 1 | 82K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22 |
| 1 | IGNITER_JST | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | U8 |
| 1 | LM2596S-5.0/NOPB_IC | ris-26_footprint_lib:TO170P1524X483-6N | U5 |
| 1 | MICROSD_PIN | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | U9 |
| 1 | NODEMCU-32_PIN | ris-26_footprint_lib:NODEMCU-32S_PIN | U1 |
| 1 | PCB_LED_PIN | ris-26_footprint_lib:RECEIVER_LED | U7 |
| 1 | POWER_JST | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | U10 |
| 1 | RA-02_MODULE | ris-26_footprint_lib:RA-02 | U2 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | SB520 | ris-26_footprint_lib:P2_DO-201 | D1 |

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU



linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU




plb500/AutoBloomer-SensorModules
Code and PCB designs for AutoBloomer MQTT sensor modules



zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...


Hack-a-Day/2025-Communicator_Badge
The 2025 Hackaday Supercon RF Communicator Badge

It measures 115 × 110 mm and has 2 copper layers, 1.6 mm thick.
58 parts, built around the 74HC08D-TD and SB520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the linkkwisteria-droid/ris-26 repository on GitHub, at the commit this page was made from: the board is kicad/igniter/ris-26_igniter_v2/ris-26_receiver_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask linkkwisteria-droid before reusing the design.