
Ris-26 igniter v8 pcb v4
linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

Remote Igniting System 26, Avionics, ISP, NCKU
Ris-26 igniter v6 is an open-source printed circuit board by linkkwisteria-droid, from the linkkwisteria-droid/ris-26 repository on GitHub. It is a 2-layer board with 42 parts on 59 nets, routed with 113 tracks and 7 vias.
It is built around the 74HC08D-TD, FDD8896 and MMBT2222A, with the SK32 and PE-54041SNL among its other parts. Its parts include 16 resistors, 10 ICs, 5 transistors, 3 capacitors and 2 diodes. It belongs with the ESP8266 boards of this library.
Info
- Author: 林冠宏
- Built Date: 2026-07-08
- Summary: 一個RIS-26專案的README.md檔案,路徑為 "ris-26/"。
RIS-26,全名為 "Remote Ignition System 26,是 NCKUISP航電組 在 2026-01 開始的專案,主要負責人為 林冠宏,此專案目標為製造一個遙控點火系統。
ris-26
├─doc # 文件
├─draw-io # draw.io 網站的檔案
├─kicad # kicad 檔案,依照子系統分類
├─ltspice # SPICE 模擬軟體 LTSPICE
├─solidwork # 3D CAD
└─vscode # vscode 檔案,依照子系統分類修碰
| No. | Name | |
|---|---|---|
| 01 | 林冠宏 | linkk.wisteria@gmail.com |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R7, R9, R12, R14, R16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 22 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R8, R11 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R6 |
| 2 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15 |
| 2 | 74AHC1G04SE-7 | ris-26_footprint_lib:SOT65P210X110-5N | U6, U8 |
| 2 | FDD8896 | Package_TO_SOT_SMD:TO-252-2 | Q2, Q5 |
| 2 | MMBT2222A | ris-26_footprint_lib:TSOT-23_HandSoldering | Q1, Q3 |
| 2 | SK32 | Diode_SMD:D_SMC_Handsoldering | D1, D2 |
| 1 | 180 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 3300uF/16V | Capacitor_THT:CP_Radial_D12.5mm_P7.50mm | C3 |
| 1 | 330uF/16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 560uF/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 74HC08D-T | ris-26_footprint_lib:SOIC127P600X175-14N | U7 |
| 1 | HS-1230A | ris-26_footprint_lib:TMB12A03_BUZZER | BZ1 |
| 1 | IGNITER_JST | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | U10 |
| 1 | LM2596S-5.0/NOPB_IC | ris-26_footprint_lib:TO170P1524X483-6N | U2 |
| 1 | MANUAL_BUT_JST | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | U9 |
| 1 | MICROSD_PIN | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U5 |
| 1 | NODEMCU-32_PIN | ris-26_footprint_lib:NODEMCU-32S_PIN | U4 |
| 1 | PE-54041SNL | ris-26_footprint_lib:P0846SNLT | L1 |
| 1 | PJA3415 | ris-26_footprint_lib:TSOT-23_HandSoldering | Q4 |
| 1 | POWER_JST | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | U1 |
| 1 | RYLR993_LITE_JST | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | U3 |

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU




linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU




Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

atomic14/ch32v003-audio
A collection of audio projects for the CH32V003J4M6 RISC-V microcontroller, demonstrating various audio synthesis and playback techniques on an 8-pin, $0.10 microcontroller.

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .
42 parts, built around the 74HC08D-TD, FDD8896, MMBT2222A and SK32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the linkkwisteria-droid/ris-26 repository on GitHub, at the commit this page was made from: the board is kicad/igniter/ris-26_igniter_v6/ris-26_igniter_v6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask linkkwisteria-droid before reusing the design.