
RelayBoard
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

Version control for the Waterloop Electrical Team
Psyduck is an open-source printed circuit board by lindamao-waterloop, from the lindamao-waterloop/waterloop_electrical repository on GitHub. It is a 2-layer board of 38.1 × 25.4 mm with 19 parts on 33 nets, routed with 149 tracks and 18 vias.
It is built around the ATMEGA16M1-AU and TJA1051T. Its parts include 8 capacitors, 3 ICs, 3 connectors, 1 resistor and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C7, C9 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP0, TP4, TP8 |
| 2 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C8, C9 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6 |
| 1 | 100u | Capacitor_SMD:C_1210_3225Metric_Pad1.42x2.65mm_HandSolder | C3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | ATmega16M1-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x03_Male | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Conn_01x04_Male | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Crystal | Crystal:Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm | Y1 |
| 1 | ISP-6 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | NCP1117-5V | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | TJA1051T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team
/Laser_Stripe_Sensor.kicad_pcb.jpg?size=s&soon)
lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team

lindamao-waterloop/waterloop_electrical
Version control for the Waterloop Electrical Team




claudiucherciu/CANtoUART
ATmega16M1 with 2CAN transceivers and UART breakout on a PC104 pcb.

brandon-martinez/jgb
The microcontroller present on this board, and the software which runs on it should eventually be integrated into each node which must communicate via the CAN bus.


It measures 38.1 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
19 parts, built around the ATMEGA16M1-AU and TJA1051T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lindamao-waterloop/waterloop_electrical repository on GitHub, at the commit this page was made from: the board is Psyduck/Psyduck.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lindamao-waterloop before reusing the design.