2 layers86 × 54 mm
2 layers33 × 10 mm
Eleca extend
lightcafe-lab/ELECA1Business card style Arduino compatible board
- Size
- 33 × 10 mm
- Copper layers
- 2
- Thickness
- 0.69 mm
- Parts
- 19
- Nets
- 32
- Pads
- 130
- Tracks, vias
- 95, 26
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Oct 2023
- Updated
- 25 Sep 2024
Overview
Eleca extend is an open-source printed circuit board by lightcafe-lab, from the lightcafe-lab/ELECA repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 33 × 10 mm with 19 parts on 32 nets, routed with 95 tracks and 26 vias.
It is built around the LIS3DH and APTF1616LSEEZGKQBKC. Its parts include 8 resistors, 3 capacitors, 2 connectors, 1 IC and 1 diode.
Main components
2
LIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
APTF1616LSEEZGKQBKC
SMD-4P,1.6x1.6mm-40℃~+85℃ 0.7mm 1.6mm 1.6mm 1.8V~2.1V 102.5mW 120mW 120° 14mcd 15mcd 2.65V~3.1V 2.65V~3.1V 460nm 465nm 50mcd 515nm 525nm 621nm 630nm 75mW Common Anode R:3000V、G:450V、B:250V Water Clear SMD-4P,1.6x1.6mm RGB LEDs ROHSKingbrightRGB LEDs
README
README.mdELECA
ELECA（エレカ）はCC BY-SA4.0ライセンスで名刺デザインのArduino互換機です
LIGHTCAFE LAB ELECA 作品ページはこちら
https://lab.lightcafe.co.jp/work/eleca
firmware
ELECAに書き込むArduinoのサンプルスケッチです
給電すると動作がはじまります
eleca-ble-write
Bluetoothの子機（peripheral）になります
eleca-hand-pov
ハンディのバーサライタになります
eleca-stand
レインボーが流れていきます
hardware
ELECA付属のハードウェアです
3d-print-options
3DプリントできるELECA専用スタンドです
acryl-cover
ELECAの専用アクリルカバーです
pcb
KiCad (v8.0.3)を使用した回路図と基板図です
pcb-eleca
ELECAのメイン基板
pcb-eleca-extend
ELECAの拡張スロット用基板
・拡張基板1（加速度センサ）
・拡張基板2（フルカラーLED＋スイッチ）
ライセンスについて
この 作品 は クリエイティブ・コモンズ 表示 - 継承 4.0 国際 ライセンスの下に提供されています
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R5, R6, R7, R8 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | pin_0205_CCW | 203-business-card:hachi-8080-10pin-castle | J1, J2 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 435151014846-SW | 203-business-card:435151014846 | SW1 |
| 1 | APTF1616LSEEZGKQBKC | 203-business-card:LED_APTF1616LSEEZGKQBKC | D1 |
| 1 | LIS3DH | 203-business-card:LIS3DH | IC1 |
The 16 most common of 19 parts.
Questions
How big is the Eleca extend PCB?
It measures 33 × 10 mm and has 2 copper layers, 0.69 mm thick.
What parts does the Eleca extend use?
19 parts, built around the LIS3DH and APTF1616LSEEZGKQBKC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eleca extend KiCad files?
From the lightcafe-lab/ELECA repository on GitHub, at the commit this page was made from: the board is pcb/pcb-eleca-extend/eleca-extend.kicad_pcb and its schematic pcb/pcb-eleca-extend/eleca-extend.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eleca extend design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from lightcafe-lab/ELECA
1Similar boards
- 4 layers16.5 × 10.9 mm
- 2 layers35 × 62 mm
- 4 layers60 × 75 mm
- 4 layers50 × 50 mm
Watch wearable
TENNLab-UTK/NWRIST
Code and KiCAD PCB design for the NWRIST: Neuromorphic Wearable for Real-Time Intelligent Sensing Technology paper
79 parts - 2 layers78.8 × 54.8 mm
- 2 layers52 × 26 mm
- 2 layers89.8 × 10.2 mm
- 4 layers83 × 83 mm
Blinkekatze
TobleMiner/blinkekatze
Blinkekatze, a replacement PCB to turn cat themed night-lights into interactive light displays
134 parts34