

Kicad files for a printed circuit board extending the Raspberry Interfaces GPIOs.
- Size
- 149.9 × 72.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 57
- Pads
- 165
- Tracks, vias
- 97, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Aug 2018
- Updated
- 8 Aug 2018
Overview
RMPBoardV2 is an open-source printed circuit board by liebrandapps, from the liebrandapps/RPI-Multi-Purpose-Extension-Board repository on GitHub. It is a 2-layer board of 149.9 × 72.4 mm with 31 parts on 57 nets, routed with 97 tracks and 0 vias.
It is built around the DS18B20, MCP3008-I/P and ULN2803A, with the MCP23017-E/SS and HC-SR04 among its other parts. Its parts include 15 connectors, 5 ICs and 3 resistors.
Main components
5DS18B20
TO-92-55℃~+125℃ 12bit 3V~5.5V 750ms Single-bus ±0.4℃ TO-92 Temperature Sensors ROHSUMWTemperature SensorsMCP3008-I/P
PDIP-16-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)ULN2803A
SOP-18-300mil-40℃~+85℃ 0.93mA 100uA 15pF 20uA 30V 500mA 50V 8 SOP-18-300mil Darlington Transistor Arrays ROHSUMWDarlington Transistor ArraysMCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersHC-SR04
-- Ultrasonic Receivers, Transmitters ROHSUniversal MicroelectronicsUltrasonic Receivers, Transmitters
README
README.mdRPI-Multi-Purpose-Extension-Board
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | Mounting_Holes:MountingHole_3.2mm_M3_DIN965 | , , , , , , , | |
| 2 | ULN2803A | Housings_DIP:DIP-18_W7.62mm | IC2, IC3 |
| 1 | 1K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R201 |
| 1 | 2K | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R200 |
| 1 | 3V3 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J3 |
| 1 | 4K7 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R100 |
| 1 | 5V | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J15 |
| 1 | Analog | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J31 |
| 1 | DS18B20 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | IC5 |
| 1 | Extra 3V3 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J20 |
| 1 | Extra GND | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J22 |
| 1 | FS20 IN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J40 |
| 1 | FS20 OUT | Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mm | J41 |
| 1 | Ground | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J4 |
| 1 | HC-SR04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J60 |
| 1 | MCP23017 | Housings_DIP:DIP-28_W7.62mm | IC1 |
| 1 | MCP3008 | Housings_DIP:DIP-16_W7.62mm | IC4 |
| 1 | Output Row A | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J2 |
| 1 | Output Row B | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | J1 |
| 1 | RPI ADC Conn | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J30 |
| 1 | SCL / SDA | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J10 |
| 1 | Temp Sens DS | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J21 |
| 1 | Ultrasonic | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J61 |
Similar boards
- 4 layers101.6 × 141.7 mm

- 2 layers65 × 100 mm

Doc
EleonoreMizo/pedalevite
Pédale Vite — DIY multi-FX pedalboard for guitar/bass/etc.
117 parts101WTFPL - 2 layers76.2 × 63.5 mm

- 2 layers65 × 56 mm

- 2 layers293.4 × 80.5 mm

- 2 layers72 × 144.5 mm

I2cpanel.unrouted
QUniBone/Hardware
Design files to produce UniBone / QBone hardware
302 parts2BSD-2-Clause - 2 layers100 × 100 mm

OptoisolatedRelay
profdc9/ModularTuner
A Modular Antenna Tuner for a Phased Array Antenna System
126 parts59 - 2 layers89.4 × 166.9 mm

BBBHalfSiding
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
70 parts24
Questions
How big is the RMPBoardV2 PCB?
It measures 149.9 × 72.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RMPBoardV2 use?
31 parts, built around the DS18B20, MCP3008-I/P, ULN2803A and MCP23017-E/SS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RMPBoardV2 KiCad files?
From the liebrandapps/RPI-Multi-Purpose-Extension-Board repository on GitHub, at the commit this page was made from: the board is RMPBoardV2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the RMPBoardV2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask liebrandapps before reusing the design.