
FlowSensor 2023
takuhoTech/LagopusSystem-2023
Avionics for Human-Powered Aircraft, Including Bike Power Meter project.

IMU daughterboard for upright and frame peripheral SOMs.
Telemetry Peripheral SOM Daughterboard IMU is an open-source printed circuit board by lhr-solar, from the lhr-solar/DataAcq-PeripheralSOMDaughterPCB repository on GitHub. It is a 2-layer board of 40 × 55 mm with 34 parts on 35 nets, routed with 140 tracks and 72 vias.
It is built around the FS3000-1015 and LSM6DSV. Its parts include 12 capacitors, 4 resistors, 4 connectors and 2 ICs. It belongs with the sensors and measurement and computers and single-board computers boards of this library.
Author: Frank Li and Jim Fang
This board takes inputs from an IMU, airflow sensor, and three temp sensors and interfaces with the BPS Leader SOM.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C8, C10, C12 |
| 5 | TestPoint | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | Airflow_SCL, Airflow_SDA, Temp1, Temp2, Temp3 |
| 3 | 10n | Capacitor_SMD:C_0805_2012Metric | C7, C9, C11 |
| 3 | 2.2k | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2, FB3 |
| 3 | 3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4 |
| 3 | Conn_01x03_Pin | UTSVT_Connectors:Molex_MicroFit3.0_1x3xP3.00mm_PolarizingPeg_Vertical | J2, J3, J4 |
| 2 | M.3 | MountingHole:MountingHole_3mm | MH1, MH2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | 3.3V_TP1, GND_TP1 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 50 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Conn_02x10_Odd_Even | UTSVT_Connectors:Molex_53307-2071 | J1 |
| 1 | FS3000-1015 | UTSVT_Special:FS30001015 | IC1 |
| 1 | LSM6DSV | UTSVT_Special:LGA14-L_2P59X3P1X0P5_STM | U1 |

takuhoTech/LagopusSystem-2023
Avionics for Human-Powered Aircraft, Including Bike Power Meter project.

theta-machines/DEV-G2-NANO
The G2 Nano is powered by a record-breaking 1 GHz Arm Cortex-M7 processor, combining the performance of an application processor with real-time determinism.

RemiFM/USB-LiDAR-VL53L9
USB accessory device with VL53L9 Time of Flight sensor (dToF 3D LiDAR) & 6-axis IMU



sigmondkukla/lmp91000
This repository contains the C++ firmware for the custom potentiostat platform (featuring an LMP91000 analog front end, EFR32BG24 MCU, and an LSM6DSV IMU) alongside a Python-based real-time wireless BLE debugging client.

1hira-c/fitra-aaa
Raytac AN54LQ-15(nRF54L15)搭載の SlimeVR(Smol Slime)トラッカー基板 / KiCad 設計

It measures 40 × 55 mm and has 2 copper layers, 1.6 mm thick.
34 parts, built around the FS3000-1015 and LSM6DSV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lhr-solar/DataAcq-PeripheralSOMDaughterPCB repository on GitHub, at the commit this page was made from: the board is Telemetry-Peripheral-SOM-Daughterboard-IMU.kicad_pcb and its schematic Telemetry-Peripheral-SOM-Daughterboard-IMU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.