2 layers70.5 × 88.5 mm
2 layers91 × 94 mm
BPS Test
lhr-solar/BPS-TestPCB- Size
- 91 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 53
- Pads
- 216
- Tracks, vias
- 320, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 2 Aug 2020
- Updated
- 16 Oct 2021
Overview
BPS Test is an open-source printed circuit board by lhr-solar, from the lhr-solar/BPS-TestPCB repository on GitHub. It is a 2-layer board of 91 × 94 mm with 106 parts on 53 nets, routed with 320 tracks and 9 vias.
It is built around the RFM-0505S. Its parts include 26 connectors, 18 resistors and 11 capacitors.
Main components
1README
README.mdElectronics : SCH/PCB
Contains all schematics and PCB files for the electrical system. Some teams may use the Solar Google Drive to upload their files.
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22 +6 |
| 12 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 11 | 6.8u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 11 | RFM-0505S | UTSVT_Power:RFM0505S | PS1, PS2, PS3, PS4, PS5, PS6, PS7, PS8, PS9, PS10, PS11 |
| 9 | 280 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R11, R12, R13, R14, R15 |
| 9 | 720 | Resistor_SMD:R_0805_2012Metric | R16, R17, R18, R19, R20, R21, R22, R23, R24 |
| 4 | R_POT | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical_Hole | RV1, RV2, RV3, RV4 |
| 2 | Conn_01x01 | UTSVT_Connectors:Banana_Jack_1_Pin_4mm | J25, J26 |
| 2 | Conn_01x07 | UTSVT_Connectors:Molex_MicroFit_01x07_Horizontal | J23, J24 |
| 1 | ConstMod1-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP21 |
| 1 | ConstMod1-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP22 |
| 1 | ConstMod2-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP23 |
| 1 | ConstMod2-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP24 |
| 1 | ConstMod3-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP25 |
| 1 | ConstMod3-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP26 |
| 1 | ConstMod4-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP27 |
| 1 | ConstMod4-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP28 |
| 1 | ConstMod5-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP29 |
| 1 | ConstMod5-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP30 |
| 1 | ConstMod6-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP31 |
| 1 | ConstMod6-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP32 |
| 1 | ConstMod7-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP33 |
| 1 | ConstMod7-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP34 |
| 1 | ConstMod8-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP35 |
| 1 | ConstMod8-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP36 |
| 1 | ConstMod9-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP37 |
| 1 | ConstMod9-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP38 |
| 1 | Hallock | UTSVT_Special:Hallock_Image | LOGO1 |
| 1 | UTSVT_Logo | UTSVT_Special:UTSVT_Logo_Symbol | LOGO2 |
| 1 | VariableMod1-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP19 |
| 1 | VariableMod1-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP20 |
| 1 | VariableMod2-GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP17 |
| 1 | VariableMod2-Vout | TestPoint:TestPoint_Pad_2.0x2.0mm | TP18 |
More from lhr-solar/BPS-TestPCB
1Similar boards
- 2 layers100 × 100 mm
Pico dram tester
schlae/pico-dram-tester
Raspberry Pi Pico 2 Vintage DRAM Tester
47 parts165CC-BY-SA-4.0 - 4 layers80 × 100 mm
- 4 layers100 × 50 mm
Psu ext
PSU-Ext-Org/psu-ext-hardware
A repository to store PSU-EXT hardware design assets, schematics, circuit diagrams, CAD files and manufacturing data.
137 parts9CERN-OHL-S-2.0 - 4 layers165 × 50 mm
- 2 layers127 × 100.3 mm
Cross point exp brd mini red2-sjmp
damercer/Cross-Point-Project
A Software Configurable Solderless Breadboard
130 parts3 - 2 layers59.4 × 32.3 mm
- 6 layers170 × 172.2 mm
Esc rev b
iamdarshg/drone-arm
Reworked cheaper, maybe faster but less redundant drone controller.
681 parts2 - 4 layers68.5 × 53.3 mm
Questions
How big is the BPS Test PCB?
It measures 91 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BPS Test use?
106 parts, built around the RFM-0505S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BPS Test KiCad files?
From the lhr-solar/BPS-TestPCB repository on GitHub, at the commit this page was made from: the board is BPS-Test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BPS Test design in my own project?
Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.