

MPU6050
kicad 6轴陀螺仪
- Size
- 23 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 21
- Pads
- 56
- Tracks, vias
- 103, 38
- Pours
- 30
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 May 2025
- Updated
- 31 May 2025
Overview
MPU6050 is an open-source printed circuit board by lessthan00, from the lessthan00/MPU6050 repository on GitHub. It is a 2-layer board of 23 × 22 mm with 9 parts on 21 nets, routed with 103 tracks and 38 vias.
It is built around the MPU-6050. Its parts include 4 capacitors, 2 resistors, 2 connectors and 1 IC.
Main components
1README
README.mdParts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | PCM_Capacitor_SMD_AKL:C_1206_3216Metric | C2, C3 |
| 2 | 10K | PCM_Resistor_SMD_AKL:R_1206_3216Metric | R1, R2 |
| 1 | 10nF | PCM_Capacitor_SMD_AKL:C_1206_3216Metric | C1 |
| 1 | 2.2nF | PCM_Capacitor_SMD_AKL:C_1206_3216Metric | C4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | MPU-6050 | Library:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1 |
Similar boards
- 2 layers23 × 120 mm

- 4 layers95 × 50 mm

Control board
ZhuYanzhen1/MM32_CLion
本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.
129 parts58AGPL-3.0 - 2 layers50 × 66 mm

- 2 layers36 × 43 mm

Asac fc rev a
victorhook/asac-fc
asac fc is an rp2040 based flight controller made for FPV drone flying
119 parts52GPL-3.0 - 4 layers305 × 208.3 mm

- 2 layers98.5 × 17.8 mm

- 2 layers36.2 × 36.2 mm

- 2 layers26 × 21.3 mm

PModBoard
pms67/PModlet
PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.
19 parts15MIT
Questions
How big is the MPU6050 PCB?
It measures 23 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MPU6050 use?
9 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MPU6050 KiCad files?
From the lessthan00/MPU6050 repository on GitHub, at the commit this page was made from: the board is MPU6050.kicad_pcb and its schematic mpu6050.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MPU6050 design in my own project?
Its repository states no licence, so its author keeps all rights: ask lessthan00 before reusing the design.