

Analogmodul
- Size
- 100 × 38 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 75
- Nets
- 99
- Pads
- 296
- Tracks, vias
- 803, 153
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Dec 2025
- Updated
- 24 Jan 2026
Overview
Analogmodul is an open-source printed circuit board by LeoWatti99, from the LeoWatti99/CANTram-Framework repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 38 mm with 75 parts on 99 nets, routed with 803 tracks and 153 vias.
It is built around the SI8261BAD-C-ISR, TS924IPT and L78M10ABDT-TR, with the MAX22531AAP+, 156120GS75000 and 156120RS75000 among its other parts. Its parts include 26 resistors, 22 capacitors, 9 ICs, 6 diodes and 4 connectors.
Main components
7SI8261BAD-C-ISR
SDIP-6-40℃~+125℃ 1 1.2A 5.5ns 500mA 8.5ns IGBT、MOSFET SDIP-6 Gate Drivers ROHSSkyworks SolutionsGate DriversTS924IPT
TSSOP-14-40℃~+125℃ 1.3V/us 15nA 1mA 2.7V~12V 2uV/℃ 30nA 3mV 4 4MHz 80dB 80mA 9nV/√Hz@1kHz ESD protection Rail-to-Rail Input, Rail-to-Rail Output TSSOP-14 Operational Amplifier ROHSSTMicroelectronicsOperational AmplifierL78M10ABDT-TR
TO-252-2(DPAK)-40℃~+125℃@(Tj) 10V 25V 2V 500mA 56dB@(120Hz) 64uV 6mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMAX22531AAP+
SSOP-20SSOP-20 Isolated ADCs with power ROHSMaxim Integrated (Analog Devices)Isolated ADCs With Power156120GS75000
1206140° 20mA 235mcd 3.3V 520nm 525nm Emerald Green Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)156120RS75000
1206140° 20mA 2V 60mcd 624nm 632nm Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdCAN-TRAM-Framework
Das CAN-TRAM-Framework ist ein mikrocontrollerbasiertes, modulares Steuerungssystem, dass sich aus einzelnen Modulen zusammensetzen lässt. Die Struktur des Systems orientiert sich an üblichen SPS-Systemen, sodass eine CPU bzw. ein Hauptmodul um beliebig viele Module erweitert werden kann, um Funktionen hinzuzufügen.
Inventor CAD Dateien öffnen
Die CAD Dateien des Projekts sind im Ordner Inventor CAD) enthalten. Um das Projekt wie vorgesehen zu öffnen muss in Inventor 2025 oder höher die Datei Controller.ipj geöffnet werden.
KiCAD Schaltungen öffnen
Im Ordner KiCad Schaltungen sind alle Projekte der einzelnen Platinen enthalten. Darin befinden sich sowhol Prototypen Schaltungen als auch aktuelle Modulplatinen. Um die Projekt zu öffnen wird KiCAD 9.0.6 benötigt. über die .kicad_pro-Dateien in den Unterordnern können die Projekte vollständig mit der Verlinkung zwischen Schaltplan und Layout geöffnet werden.
C++ Framework
Die Firmware des Systems ist als C++ Bibliothek im Ordner Framework enthalten.
Dokumentation
Die Software-Dokumentation kann hier geöffnet werden. Sie wird automatisch durch Doxygen erstellt und nach Änderungen des Codes aktualisiert.
Parts
75| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_1206_3216Metric | C2, C4, C5, C6, C7, C9, C11, C17, C19, C20, C21, C22 |
| 6 | 6,2k | Resistor_SMD:R_1206_3216Metric | R5, R10, R11, R12, R13, R14 |
| 5 | 100 | Resistor_SMD:R_1206_3216Metric | R1, R2, R3, R4, R9 |
| 5 | 156120GS75000 | SamacSys_Parts:LEDM3216X130N | LED1, LED3, LED4, LED5, LED6 |
| 4 | 1,8k | Resistor_SMD:R_1206_3216Metric | R17, R19, R21, R23 |
| 4 | 470 | Resistor_SMD:R_1206_3216Metric | R27, R28, R29, R30 |
| 4 | 8,2k | Resistor_SMD:R_1206_3216Metric | R16, R18, R20, R22 |
| 4 | SI8261BAD-C-ISR | SamacSys_Parts:SOIC127P1150X265-6N | IC1, IC2, IC3, IC4 |
| 4 | SZMMSZ4679T1G | SamacSys_Parts:SOD3716X135N | Z1, Z2, Z3, Z4 |
| 3 | 10n | Capacitor_SMD:C_1206_3216Metric | C15, C16, C23 |
| 3 | 1u | Capacitor_SMD:C_1206_3216Metric | C3, C12, C13 |
| 2 | 21n | Capacitor_SMD:C_1206_3216Metric | C8, C10 |
| 2 | 4,7k | Resistor_SMD:R_1206_3216Metric | R6, R7 |
| 2 | TPS259621DDAR | SamacSys_Parts:SOIC127P600X170-9N | IC5, IC7 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C18 |
| 1 | 156120RS75000 | SamacSys_Parts:LEDM3216X130N | LED2 |
| 1 | 2N7002K | SamacSys_Parts:SOT95P240X120-3N | Q1 |
| 1 | 330n | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 39502-1004 | SamacSys_Parts:SHDRRA4W80P0X350_1X4_1540X920X730P | J1 |
| 1 | 39502-1008 | SamacSys_Parts:SHDRRA8W80P0X350_1X8_2940X920X690P | J4 |
| 1 | 658801103040 | SamacSys_Parts:658801103040 | J3 |
| 1 | 658855603040 | SamacSys_Parts:658855603040 | J6 |
| 1 | ICK 20 L | SamacSys_Parts:Heatsink ICK 20 L | HS1 |
| 1 | L78M10ABDT-TR | SamacSys_Parts:TO228P972X240-3N | IC6 |
| 1 | LOGO | SamacSys_Parts:fh2rail_Logo | G*** |
| 1 | MAX22531AAP+ | SamacSys_Parts:SOP65P778X199-20N | IC8 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP1 |
| 1 | TS924IPT | SamacSys_Parts:SOP65P640X120-14N | IC9 |
More from LeoWatti99/CANTram-Framework
12- 2 layers100 × 38 mm

- 2 layers55 × 42 mm

- 2 layers100 × 61 mm

- 2 layers65 × 37 mm

- 2 layers45.5 × 37.3 mm

- 2 layers69 × 86 mm

- 2 layers100 × 38 mm

- 2 layers100 × 38 mm

- 2 layers32.5 × 33 mm

- 2 layers36.5 × 25.5 mm

- 2 layers38.5 × 35 mm

- 2 layers55.5 × 18 mm

Similar boards
- 2 layers123.3 × 143.8 mm

Iso adc cvm
OisinS13/FC_IP_rig
Code to control a FC rig based around a Powercell S2 24 cell PEMFC stack
176 partsGPL-3.0 - 2 layers86.2 × 50.2 mm

MostlyBuildsSpeakerPod
MostlyBuilds/speaker-pod-pcb
This is a PCB design for an ESP32-based speaker controller
93 parts3CC-BY-SA-4.0 - 2 layers100 × 100 mm

- 2 layers100 × 75 mm

DClassAmplifier
Joshua-Benfell/ECEN405_ClassDAmplifier
Further reading: on output filter types for class-d amplifiers and BTL configurations on Wikipedia
92 parts - 4 layers88 × 60 mm

Embedded v1
sofiamonty/embedded-pcb-pt100
4-layer KiCad PCB integrating a PT100 temperature sensor and SAMD21 microcontroller with LCD interface; includes schematics, layout, firmware, BOM, and PDF documentation.
48 parts - 2 layers15 × 23 mm

NeuroBits - Bicore
Binomica-Labs/Hardware
Open source tools for scientific inquiry and exploration!
8 parts22MIT - 4 layers100 × 43 mm

- 4 layers46.8 × 34.8 mm

SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT
Questions
How big is the Analogmodul PCB?
It measures 100 × 38 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Analogmodul use?
75 parts, built around the SI8261BAD-C-ISR, TS924IPT, L78M10ABDT-TR and MAX22531AAP+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Analogmodul KiCad files?
From the LeoWatti99/CANTram-Framework repository on GitHub, at the commit this page was made from: the board is KiCad Schaltungen/Analogmodul/Analogmodul.kicad_pcb and its schematic KiCad Schaltungen/Analog Input Prototyp/Analog Input Prototyp/Analog Input Prototyp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Analogmodul design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).