

Creating a L9110 module using PCB techniques.
- Size
- 76.8 × 32.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 16
- Pads
- 68
- Tracks, vias
- 93, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 2 Jul 2024
- Updated
- 26 Mar 2025
Overview
BBBC is an open-source printed circuit board by Lee34667, from the Lee34667/PCB_Kicad_Projects repository on GitHub. It is a 2-layer board of 76.8 × 32.8 mm with 25 parts on 16 nets, routed with 93 tracks and 1 via.
It is built around the TL494 and IRF540N. Its parts include 12 resistors, 4 capacitors, 2 ICs, 2 connectors and 1 diode.
Main components
2README
README.mdContains some the PCB projects I have done using KiCad. Most of this boards have been used in the industries and research work.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R7, R8, R11 |
| 3 | 2.2K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R9, R10, R12 |
| 2 | 1000uF 25V | Capacitor_THT:C_Radial_D4.0mm_H7.0mm_P1.50mm | C1, C2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J2 |
| 1 | 1000uF 63V | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C4 |
| 1 | 10K | Potentiometer_THT:Potentiometer_Bourns_3299Y_Vertical | RV1 |
| 1 | 2.2nF | Capacitor_THT:C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 | C3 |
| 1 | 220uH | Ferrite_THT:LairdTech_28C0236-0JW-10 | L1 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 50K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 560 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 560R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | ADA4610-1xRJ | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | D_Schottky_Dual_CommonCathode_AKA | Dual_Schottky:SOT96P240X120-3N | D1 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | TL494 | TL494:DIP794W45P254L1969H508Q16 | U1 |
The 24 most common of 25 parts.
More from Lee34667/PCB_Kicad_Projects
12- 4 layers82.4 × 59.6 mm

- 4 layers86 × 33.6 mm

- 4 layers67.8 × 70.6 mm

- 2 layers22.5 × 110.8 mm

- 2 layers79 × 78 mm

Internal Resistance Meter
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
29 parts1 - 4 layers68.6 × 86.4 mm

Solar Power Regulator PCB
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
27 parts1 - 2 layers74.7 × 40.1 mm

RS485 Fire panel interface
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
26 parts1 - 8 layers89.9 × 116.8 mm

Two phase bipolar stepper motor
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
21 parts1 - 4 layers24 × 38 mm

- 4 layers50.6 × 35.3 mm

- 4 layers52.3 × 29.2 mm

Multipurpose FM Transmitter
Lee34667/PCB_Kicad_Projects
Creating a L9110 module using PCB techniques.
18 parts1 - 2 layers41.1 × 27.9 mm

Similar boards
- 2 layers100 × 100 mm

Bidirectional Power Converter 24V-12V with BMS
kwiecinski/BMS-and-offgrid-photovoltaic-management-system
Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.
161 parts3MIT - 2 layers224.2 × 153.7 mm

- 2 layers99.3 × 98.6 mm

FlexiblePS
profdc9/FlexibleCharger
An Arduino-controlled charger for different kinds of batteries, or it can be a standalone power supply
118 parts13 - 2 layers61.6 × 53.7 mm

Osborne floppy emulator
khaddra/osborne-floppy-emulator
Floppy disk drive emulator for the Osborne 1. Unfinished.
82 parts2 - 2 layers177.4 × 65.5 mm

- 2 layers100 × 50 mm

- 2 layers58 × 34 mm

- 2 layers70.5 × 53 mm

SolarCar
jaimeuydebaron/Solar-Powered-RC-Car
To make it easy for you to get started with GitLab, here's a list of recommended next steps.
46 parts
Questions
How big is the BBBC PCB?
It measures 76.8 × 32.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BBBC use?
25 parts, built around the TL494 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BBBC KiCad files?
From the Lee34667/PCB_Kicad_Projects repository on GitHub, at the commit this page was made from: the board is BBBC/BBBC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BBBC design in my own project?
Its repository states no licence, so its author keeps all rights: ask Lee34667 before reusing the design.