Skip to the content
2 layers177.4 × 65.5 mmFuente smps 250w, the printed circuit board in 3D

Fuente smps 250w

picli3/dc-dc_250w_tl4941

fuente de poder de 12 a +/- 33V

Size
177.4 × 65.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
51
Nets
41
Pads
166
Tracks, vias
287, 14
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Dec 2020
Updated
11 Nov 2021

Overview

Fuente smps 250w is an open-source printed circuit board by picli3, from the picli3/dc-dc_250w_tl494 repository on GitHub. It is a 2-layer board of 177.4 × 65.5 mm with 51 parts on 41 nets, routed with 287 tracks and 14 vias.

It is built around the TL494, LTV-817S-TA1 and IRFZ44N, with the MBRF1080CT and MBRF1080CTR among its other parts. Its parts include 15 resistors, 13 capacitors, 8 transistors, 4 diodes and 4 connectors.

Main components

5

README

README.md

Fuente de poder conmutada

Es una fuente DC-DC que esta disenada para el uso en vehiculos con baterias de 12V, en teoria es capaz de entregar hasta 250W si se usa en transformador adecuado.

fuente de 250W

Parts

51
QtyValueFootprintReferences
81000uFCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC4, C5, C6, C7, C8, C9, C10, C11
410Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR11, R12, R13, R14
41KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R4, R9, R10
4IRFZ44NPackage_TO_SOT_THT:TO-220-3_VerticalQ5, Q6, Q7, Q8
3MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H3, H4
20.1uFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC12, C13
22N3904Package_TO_SOT_THT:TO-92L_HandSolderQ1, Q3
22N3906Package_TO_SOT_THT:TO-92L_HandSolderQ2, Q4
2510Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R5
2Conn_01x03TerminalBlock_Dinkle:TerminalBlock_Dinkle_DT-55-B01X-03_P10.00mmJ1, J2
2D_Zener_ALTDiode_THT:D_A-405_P10.16mm_HorizontalD1, D2
10.33uFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC3
110KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
11nFCapacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mmC2
12.5uFCapacitor_THT:CP_Radial_D4.0mm_P2.00mmC1
1270Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_HorizontalR15
1500Potentiometer_THT:Potentiometer_Runtron_RM-065_VerticalRV1
150KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7
151KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
19.1KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_HorizontalJ3
1Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ4
1LTV-817S-TA1Package_DIP:DIP-4_W7.62mm_LongPadsU1
1MBRF1080CTPackage_TO_SOT_THT:TO-220-3_VerticalD4
1MBRF1080CTRPackage_TO_SOT_THT:TO-220-3_VerticalD3
1TL494Package_DIP:DIP-16_W7.62mm_LongPadsIC1
1TRANSF5MSS_Devices:Toroide_40mmTR1

Similar boards

  • 2 layers115.1 × 70.3 mmCharger, the printed circuit board in 3D

    Charger

    src94/Adjustable-Power-Supply

    Voltage can be varied from 7.8V to 39V and current can be varied from 0 to 5A

    31 parts
  • 2 layers85 × 119 mmAmplificador D, the printed circuit board in 3D

    Amplificador D

    ieee-cas-unmsm/open-day-oct

    51 parts
  • 2 layers75.7 × 53.7 mmTSSI v2.1, the printed circuit board in 3D

    TSSI v2.1

    SDM-EV/EV-PCB-Dev

    49 parts3
  • 4 layers70 × 109.2 mmManafish, the printed circuit board in 3D

    Manafish

    Tropaion/Manafish_Mainboard

    The Manafish Mainboard is the main electronics board of the Manafish ROV. It replaces the Raspberry Pi 3B, the USB-connected Raspberry Pi Pico and the wiring between them with one board:

    127 partsAGPL-3.0
  • 4 layers252 × 92 mmCooksense, the printed circuit board in 3D

    Cooksense

    misko/prompt2device

    The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.

    195 parts3MIT
  • 4 layers68 × 83.4 mmBMS Temp Board V1, the printed circuit board in 3D

    BMS Temp Board V1

    sundevilmotorsports/ev-pcb-dev

    PCB development repository SDM EV

    73 parts3
  • 4 layers94.6 × 69.3 mmDishyPi1, the printed circuit board in 3D

    DishyPi1

    jrseti/pcbs

    Various printed circuit board projects

    106 partsMIT
  • 2 layers80 × 30 mmBMS Sensor, the printed circuit board in 3D

    BMS Sensor

    weaslepalace/boards

    Monorepo for PCB design stuff

    46 parts

Questions

How big is the Fuente smps 250w PCB?

It measures 177.4 × 65.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fuente smps 250w use?

51 parts, built around the TL494, LTV-817S-TA1, IRFZ44N and MBRF1080CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fuente smps 250w KiCad files?

From the picli3/dc-dc_250w_tl494 repository on GitHub, at the commit this page was made from: the board is fuente_smps_250w.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fuente smps 250w design in my own project?

Its repository states no licence, so its author keeps all rights: ask picli3 before reusing the design.