Skip to the content
4 layers70.2 × 78.7 mmHardware controle, the printed circuit board in 3D

Hardware controle

leandroassis/laspi-door
Size
70.2 × 78.7 mm
Copper layers
4
Thickness
2 mm
Parts
22
Nets
38
Pads
83
Tracks, vias
139, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
6 Jun 2022
Updated
27 Sep 2023

Overview

Hardware controle is an open-source printed circuit board by leandroassis, from the leandroassis/laspi-door repository on GitHub. It is a 4-layer board of 70.2 × 78.7 mm with 22 parts on 38 nets, routed with 139 tracks and 0 vias.

It is built around the ARDUINO UNO R3 and NE555P. Its parts include 8 resistors, 4 connectors, 3 capacitors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

Parts

22
QtyValueFootprintReferences
3330RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4, R5
2100uFCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC2, C3
11.2kRResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
110kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6
110nFCapacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mmC1
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7
11N4148Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1
1560Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
1680RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1Arduino_UNO_R3Module:Arduino_UNO_R3A1
1Con. Alimentação 9.5VTerminalBlock_RND:TerminalBlock_RND_205-00012_1x02_P5.00mm_HorizontalJ9
1Con. Placa Aux.Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ1
1DIODEDiode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD3
1FB TRANCATerminalBlock_RND:TerminalBlock_RND_205-00012_1x02_P5.00mm_HorizontalJ7
1JP LEDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ10
1KiCad-Logo_5mm_SilkScreenSymbol:KiCad-Logo_5mm_SilkScreenREFe
1LOGOCUSTOM_SYMBOL:laspilogolaspi
1NE555PPackage_DIP:DIP-8_W7.62mmU2

The 21 most common of 22 parts.

Similar boards

  • 4 layers200 × 142.3 mmFRED Electrical Scheme KiCAD, the printed circuit board in 3D

    FRED Electrical Scheme KiCAD

    GiulianoAgostini04/FRED-Project

    Real-time concentration monitoring system based on frontal-lobe EEG signals. Features a custom PCB designed with TinkerCAD and KiCad, OpenBCI Ganglion and Arduino UNO for signal acquisition, display, and frequency-band…

    93 parts1MIT
  • 2 layers68.8 × 53.6 mmRelatively Universal ROM Programmer, the printed circuit board in 3D

    Relatively Universal ROM Programmer

    AndersBNielsen/Relatively-Universal-ROM-Programmer

    Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.

    149 parts257GPL-3.0
  • 2 layers69.1 × 53.8 mmMotor controller, the printed circuit board in 3D

    Motor controller

    AlanFord/self-balancing-stick

    Dual Axis Reaction Wheel Inverted Pendulum

    25 parts79MIT
  • 2 layers68.6 × 53.3 mmProtogasm Board V2, the printed circuit board in 3D

    Protogasm Board V2

    Edging-Machines/Edging-Machines

    This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.

    14 parts67MIT
  • 2 layers53.8 × 69.6 mmEVSE V2 2, the printed circuit board in 3D

    EVSE V2 2

    PedroCNeves/AC_ChargingStation

    A learning project to create an EV AC Charging station based on an Arduino Uno

    32 parts50
  • 2 layers113.7 × 61 mmArduTester SMD, the printed circuit board in 3D

    ArduTester SMD

    jonsag/arduTester

    An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4

    17 parts14
  • 4 layers65.9 × 52.9 mmMotor shield, the printed circuit board in 3D

    Motor shield

    DCC-EX/EX-MotorShield8874

    Design files for the open source 5A Motor Shield

    114 parts12
  • 4 layers68.6 × 53.3 mm101 PCB, the printed circuit board in 3D

    101 PCB

    ICRS/101

    The all-new open source Robotics 101 course from ICRS. It's specifically designed to be run in hackspaces, after school clubs and university societies.

    89 parts10CC-BY-4.0

Questions

How big is the Hardware controle PCB?

It measures 70.2 × 78.7 mm and has 4 copper layers, 2 mm thick.

What parts does the Hardware controle use?

22 parts, built around the ARDUINO UNO R3 and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hardware controle KiCad files?

From the leandroassis/laspi-door repository on GitHub, at the commit this page was made from: the board is hardware_controle.kicad_pcb and its schematic hardware/hardware_controle.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hardware controle design in my own project?

Its repository states no licence, so its author keeps all rights: ask leandroassis before reusing the design.