Skip to the content
2 layers52.1 × 52.1 mmEsc, the printed circuit board in 3D

STM32 Green Pill (STM32F103 Devvelopment Board)

Size
52.1 × 52.1 mm
Copper layers
2
Thickness
1.2 mm
Parts
12
Nets
54
Pads
90
Tracks, vias
0, 0
Pours
2
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
24 Jul 2020
Updated
22 May 2025

Overview

Esc is an open-source printed circuit board by lbthomsen, from the lbthomsen/greenpill repository on GitHub. It is a 2-layer board of 52.1 × 52.1 mm with 12 parts on 54 nets.

It is built around the IR2101PBF, TPS5430DDA and NCEP60T12AK. Its parts include 5 connectors, 2 capacitors, 2 ICs, 2 transistors and 1 diode. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

3

README

README.md

greenpill

STM32 Green Pill

https://stm32world.com/wiki/Green_Pill

Parts

12
QtyValueFootprintReferences
3~TestPoint:TestPoint_Plated_Hole_D3.0mmJ1, J2, J5
2CCapacitor_SMD:C_0603_1608MetricC1, C2
2NCEP60T12AKPackage_TO_SOT_SMD:TO-252-2Q1, Q2
2~Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_VerticalJ3, J4
1IR2101Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1TPS5430DDAPackage_SO:TI_SO-PowerPAD-8_ThermalViasU2
1~Diode_SMD:D_SOD-323D1

More from lbthomsen/greenpill

2
  • 4 layers52.1 × 20.3 mmGreenpill, the printed circuit board in 3D

    Greenpill

    lbthomsen/greenpill

    STM32 Green Pill (STM32F103 Devvelopment Board)

    33 parts4
  • 2 layers52.1 × 33.7 mmProgrammer, the printed circuit board in 3D

    Programmer

    lbthomsen/greenpill

    STM32 Green Pill (STM32F103 Devvelopment Board)

    21 parts4

Similar boards

  • 2 layers58.8 × 60.2 mmPower drive, the printed circuit board in 3D

    Power drive

    SourceLizi/F302-minimal

    STM32F302硬件设计

    121 parts4MIT
  • 2 layers259.7 × 159.5 mmBLDC inverter, the printed circuit board in 3D

    BLDC inverter

    vladBaciu/Sensorless-BLDC-HW

    Bachelor thesis project

    104 parts3
  • 2 layers99.1 × 99.1 mmBLDC SensorlessWithLM339, the printed circuit board in 3D

    BLDC SensorlessWithLM339

    phpkadir/KiCad-Sensorless-BLDC-ESC

    I designed this pcb because I want to be able to try different microcontrollers as part of Electronic Speed Controller projects.

    55 parts2MIT
  • 2 layers45 × 63.5 mmMotor driver, the printed circuit board in 3D

    Motor driver

    CK20000/Isolated-Half-Bridge-Driver

    An isolated half-bridge motor driver board featuring 6N137 galvanic protection, an IR2101 bootstrap topology, and precise AD8418 bidirectional current sensing.

    50 parts1MIT
  • 2 layers160 × 81.3 mmEMachine 26 1, the printed circuit board in 3D

    EMachine 26 1

    Glaysia/EMachine_26_1

    이 저장소는 Nucleo-G474를 제어기로 쓰는 저전압 실험용 삼상 전력변환 프로젝트다.

    38 parts1
  • 2 layers110.5 × 82.5 mmBbesc kiCad, the printed circuit board in 3D

    Bbesc kiCad

    jakeread/bbesc

    electronic speed controller for bldc's on-a-breadboad

    82 parts1
  • 2 layers54 × 29.3 mmBldc, the printed circuit board in 3D

    Bldc

    mayankpatel97/bldc-driver

    complete bldc motor driver for drones

    74 parts1

Questions

How big is the Esc PCB?

It measures 52.1 × 52.1 mm and has 2 copper layers, 1.2 mm thick.

What parts does the Esc use?

12 parts, built around the IR2101PBF, TPS5430DDA and NCEP60T12AK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esc KiCad files?

From the lbthomsen/greenpill repository on GitHub, at the commit this page was made from: the board is firmware/esc/esc.kicad_pcb and its schematic pcb/gp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esc design in my own project?

Its repository states no licence, so its author keeps all rights: ask lbthomsen before reusing the design.