2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600
2 layers51.4 × 40 mm
CameraMotor
lboclboc/CameraMotor4Motorized equatorial camera mount.
- Size
- 51.4 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 18
- Pads
- 61
- Tracks, vias
- 176, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Mar 2019
- Updated
- 29 Nov 2020
Overview
CameraMotor is an open-source printed circuit board by lboclboc, from the lboclboc/CameraMotor repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 51.4 × 40 mm with 23 parts on 18 nets, routed with 176 tracks and 0 vias.
It is built around the ATTINY85-20SU. Its parts include 9 connectors, 5 transistors, 4 diodes, 2 capacitors and 1 resistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdCameraMotor
Motorized equatorial camera mount.
This is the code for the EQ-Camera thingiverse mount at https://www.thingiverse.com/thing:3594100. The current development is focusing on a ESP8266 wifi enabled controller that also will be able to do timelapsing for other purposes than astrophotographing.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x01 | lasse:Wire_Pad_5x2mm | J2, J3, J4, J5, J6, J7, J8 |
| 5 | Q_NMOS_GDS | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5 |
| 4 | 1N4148 | Diodes_SMD:D_0805 | D1, D2, D3, D4 |
| 1 | 0 | Resistors_SMD:R_1206 | R1 |
| 1 | ATTINY85-20SU | Housings_SOIC:SOIJ-8_5.3x5.3mm_Pitch1.27mm | U1 |
| 1 | C | Capacitors_SMD:C_0805 | C2 |
| 1 | CP | Capacitors_SMD:CP_Elec_8x5.4 | C1 |
| 1 | Conn_02x03_Odd_Even | Pin_Headers:Pin_Header_Straight_2x03_Pitch2.54mm | J9 |
| 1 | Polyfuse | Fuse_Holders_and_Fuses:Fuse_0679H | F1 |
| 1 | USB_OTG | Connectors:USB_Micro-B | J1 |
Questions
How big is the CameraMotor PCB?
It measures 51.4 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CameraMotor use?
23 parts, built around the ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CameraMotor KiCad files?
From the lboclboc/CameraMotor repository on GitHub, at the commit this page was made from: the board is CameraMotor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CameraMotor design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50 - 2 layers134.3 × 140 mm
- 2 layers50 × 25 mm
LoRa Environmental Sensors
spielhuus/LoRa-Environmental-Sensors
ATtiny85 based LoRa atmospheric sensor board with BME280
5 parts28