2 layers100 × 67 mm.kicad_pcb.jpg?size=s&soon)
2 layers100 × 100 mm
Embedded hardware design for learning
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 82
- Pads
- 319
- Tracks, vias
- 855, 62
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jan 2022
- Updated
- 1 Feb 2022
Overview
VH3 is an open-source printed circuit board by laurapellizari, from the laurapellizari/PBLE01---Hardware repository on GitHub. It is a 2-layer board of 100 × 100 mm with 90 parts on 82 nets, routed with 855 tracks and 62 vias.
It is built around the LM358DGK, 24LC512-I/SMG and OSTTA024163, with the PJ-002A among its other parts. Its parts include 34 resistors, 22 capacitors, 10 connectors, 5 ICs and 5 switches. It belongs with the PIC boards of this library.
Main components
4
LM358DGK
VSSOP-8-16V~-1.5V、1.5V~16V 0℃~+70℃ 2 200nA 2nA 300V/ms 30mA 3V~32V 3mV 40nV/√Hz@1kHz 700kHz 700uA 7uV/℃ 80dB EMI filtering/RF suppression VSSOP-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
24LC512-I/SMG
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMOSTTA024163
插件,P=5.08mm-30℃~+105℃ 1 14~22 15A 1x2P 2 2P 300V 5.08mm Blue Through Hole 插件,P=5.08mm Screw Terminal Blocks ROHSOn-Shore TechScrew Terminal Blocks
PJ-002A
插件-25℃~+85℃ 2.5A 24V 2mm 5.5mm DC Power Jack Right Angle 插件 DC Power Connectors ROHSCUIDC Power Connectors
README
README.mdPBLE01---Hardware
Embedded hardware design for learning
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C3, C5, C6, C7, C8, C10, C11, C15, C16, C17, C20, C21, C22 |
| 9 | 100 | Resistor_SMD:R_0805_2012Metric | R5, R6, R13, R14, R23, R25, R26, R27, R28 |
| 7 | 3k3 | Resistor_SMD:R_0805_2012Metric | R3, R4, R7, R10, R11, R12, R21 |
| 7 | 56 | Resistor_SMD:R_0805_2012Metric | R1, R29, R30, R33, R34, R35, R36 |
| 5 | 1825910-6 | 1825910-6:SW_1825910-6-4 | SW1, SW2, SW3, SW4, SW5 |
| 4 | 4k7 | Resistor_SMD:R_0805_2012Metric | R8, R15, R19, R31 |
| 3 | 220nF | Capacitor_SMD:C_0805_2012Metric | C12, C18, C19 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R9, R20 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric | C2, C4 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R2, R22 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | LM358DG | LM358DG:SOIC127P600X175-8N | OP1, OP2 |
| 2 | OSTTA024163 | OSTTA024163:SHDR2W100P0X508_1X2_1086X900X1300P | J6, J8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 12MHz | ECS-120-20-4X:XTAL_ECS-120-20-4X | Y1 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 24LC512-I_SM | 24LC512-I_SM_eeprom:SOIC127P794X202-8N | U4 |
| 1 | 6k8 | Resistor_SMD:R_0805_2012Metric | R18 |
| 1 | 9k1 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_02x04_Top_Bottom | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J7 |
| 1 | EXTENSÃO_1 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J10 |
| 1 | EXTENSÃO_2 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J3 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | LD1117DT50TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | LD1117S33CTR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LDC_header | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J9 |
| 1 | LED_1 | LED_SMD:LED_1206_3216Metric | LED_1 |
| 1 | LED_2 | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LED_3 | LED_SMD:LED_1206_3216Metric | D3 |
| 1 | LED_4 | LED_SMD:LED_1206_3216Metric | D4 |
| 1 | LED_ALIM | LED_SMD:LED_1206_3216Metric | LED_5 |
| 1 | LOGO | VH3FOOTPRINT:unifei_logo | ee |
| 1 | Lx_LED | LED_SMD:LED_1206_3216Metric | LED_6 |
| 1 | MCP2200-I-SO | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | PIC32MM0064GPM048-I_PT | PIC32MM0064GPM048-I_PT:QFP50P900X900X120-49N | IC1 |
| 1 | PJ-002A | pj-002A:CUI_PJ-002A | J4 |
| 1 | POT | P160KN-0QD15B10K:P160KN0QD15B10K | -1 |
| 1 | POT_LCD | 3296W-1-103RLF_POT_LCD:TRIM_3296W-1-103RLF | R24 |
| 1 | Rx_LED | LED_SMD:LED_1206_3216Metric | LED_7 |
| 1 | SWL1 | 1825910-6:SW_1825910-6-4 | MCLR1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
More from laurapellizari/PBLE01---Hardware
6- 2 layers100 × 100 mm
- 2 layers65 × 49 mm
- 2 layers58 × 54 mm
- 2 layers46.3 × 49.8 mm
Sub circ de comunicacao
laurapellizari/PBLE01---Hardware
Embedded hardware design for learning
16 parts - 2 layers40.6 × 43.4 mm
Similar boards
- 2 layers49.5 × 99.1 mm
- 2 layers90 × 90 mm
Mod12003 mod12003
PCBench/PCBench
resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…
452 parts21MIT - 2 layers51.3 × 96.2 mm
Minisynth32
grantek/minisynth32
A 3D-printable MIDI synthesiser inspired by the Roland MT-32 and clumsyMIDI, and powered by the mt32-pi MT-32 emulator.
32 parts45CC-BY-SA-4.0 - 6 layers228.6 × 110.7 mm
Driver
thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules
690 parts4MIT - 2 layers65 × 30.5 mm
Led pi board
jrowe88/RPi-LED-RGBMatrix-Hat
Hardware hat for Raspberry Pi to support RGB Matrix and LED strips
32 parts2 - 2 layers169 × 81 mm
SG mesocosm pi interface
scott-whitworth/bancroft_temperature_control
Supplementary material for Bancroft Experimental Temperature Control System
77 parts2 - 2 layers58.4 × 71.1 mm
Breadboard psu
cegep-electronique-programmable/pcb_alimentation_prototypage
Cette carte génére une tension de 3.3V ou 5V et se branche sur une plaquette de prototypage (breadboard).
22 parts1 - 4 layers70 × 100 mm
Questions
How big is the VH3 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VH3 use?
90 parts, built around the LM358DGK, 24LC512-I/SMG, OSTTA024163 and PJ-002A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VH3 KiCad files?
From the laurapellizari/PBLE01---Hardware repository on GitHub, at the commit this page was made from: the board is VH3/VH3/VH3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the VH3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask laurapellizari before reusing the design.