

MSP430
- Size
- 99.1 × 61 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 180
- Pads
- 445
- Tracks, vias
- 986, 150
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Nov 2024
- Updated
- 10 Jun 2025
Overview
MSP430 is an open-source printed circuit board by LASSITOS, from the LASSITOS/LEM_LASSITOS repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 99.1 × 61 mm with 61 parts on 180 nets, routed with 986 tracks and 150 vias.
It is built around the MSP430F6459TPZR, MIC5219-3.3YM5 and MIC5219-5.0YM5-TR, with the LTST-C150GKT, SBH11-PBPC-D05-RA-BK and HCM497372800ABJT among its other parts. Its parts include 18 capacitors, 14 connectors, 8 resistors, 5 ICs and 4 diodes. It belongs with the MSP430 boards of this library.
Main components
9MSP430F6459TPZR
LQFP-100(14x14)-40℃~+105℃ 1.8V~3.6V 12bit 12bit 16 Bit 20MHz 512KB 66KB 74 Built-in FLASH MSP430 CPUXV2 LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSTexas InstrumentsMicrocontrollers (MCU/MPU/SOC)MIC5219-3.3YM5
SOT23-53.3V 500mA Peak Output Low Drop-Out (LDO) RegulatorMicrochip TechnologyUncategorisedMIC5219-5.0YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 12V 3uA 500mA 5V 600mV@(500mA) 75dB@(120Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Reverse polarity voltage protection、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLTST-C150GKT
1206-55℃~+85℃ 100mW 130° 2.1V 20mA 565nm 569nm 6mcd Discrete Diode Water Clear Yellow Green 1206 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteSBH11-PBPC-D05-RA-BK
弯插Wire To Board ConnectorSullins Connector SolutionsHCM497372800ABJT
HC-49S-SMDCrystalsCITIZENPTS645SL50-2 LFS
插件-4P,6x6mm插件-4P,6x6mm Tactile Switches ROHSC&KTactile SwitchesSBH11-PBPC-D07-RA-BK
弯插-40℃~+105℃ 14P 2 2.54mm 2.54mm 2x7P 3A 7 Black Brass Gold Right Angle UL94V-0 弯插 Wire To Board Connector ROHSSullins Connector SolutionsWire To Board ConnectorSP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdLEM_LASSITOS
This repository contains the open source code, and plans for the LEM sounder develped as part of the LASSITOS project.
I should add some informations here
Construction of LEM
Operating the LEM
LEM commands
Data link LEM and UAV
The LEM Radio Link (LoRa 900MHz) is used to communicate to the LEM during measurements. The user can send control commands (START, STOP, SETFREQ,... ) connecting via serial bluetooth or USB serial to the LEM_Base. The LEM commands are transmitted over a own NMEA message ($LEMMS,...). This allows to separate them from the RTK message stream that is transmitted over the same channel. The RTK messages can be passed to the LEM_Base over Serial UART (3.3V) or USB. Only one GPS base station can be used if the RTK stream is split on the laptop between then LEM and UAV. See schematics below for passing RTK correction over UART (option1) or splitting on Laptop and passing over USB (Option2).
Data download
ESP32 data: Laser, IMU, general
LEM raw data
Data Postprocessing
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | cap_0.1uF_0603:CAPC1608X90N | C1, C8, C9, C10, C11, C17 |
| 4 | 10uF | Cap_10uF_elec:RESC3216X125N | C7, C14, C15, C16 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | 47k | Res_47k_0603:CRCW060347K0JNEA | R2, R6, R7 |
| 3 | LTST-C150GKT | LED_SMD:LTST-C150GKT | LED1, LED2, LED3 |
| 3 | SBH11-PBPC-D05-RA-BK | Con10A_RightAngle:SBH11-PBPC-D05-RA-BK | J2, J3, J4 |
| 3 | TestPoint | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1, TP2, TP3 |
| 2 | 18p | Cap_18pF_0603:CGA3E2C0G1H180J080AA | C5, C6 |
| 2 | 24p | Cap_24pF_0603:CBR06C240FAGAC | C3, C4 |
| 2 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4, U5 |
| 1 | 100 | Res_47k_0603:CRCW060347K0JNEA | R8 |
| 1 | 1734035-2 | MiniUSB:1734035-2 | J1 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 32KHz | XTAL_32KHz:ECS-.327-12.5-34B-TR | XTAL1 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 4.7nF | cap_0.1uF_0603:CAPC1608X90N | C18 |
| 1 | 4.7uF | cap_0.1uF_0603:CAPC1608X90N | C2 |
| 1 | 470nF | Cap_470nF_0805:CAPC2012X110N | C12 |
| 1 | CP2102N-Axx-xQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Con_SD | Con_SD_10pin:ST11S008V4HR2000 | J9 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J13 |
| 1 | Conn_01x18 | Connector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_Vertical | J5 |
| 1 | Conn_01x21 | Connector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_Vertical | J6 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J12 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J7 |
| 1 | Conn_02x18_Odd_Even | Jumpers:SolderJumper_18 | J11 |
| 1 | Conn_02x21_Odd_Even | Jumpers:SolderJumper_21 | J10 |
| 1 | HCM497372800ABJT | XTAL _7.3728MHz:HCM497372800ABJT | XTAL2 |
| 1 | Jumper_2_Bridged | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP2 |
| 1 | MIC5219-5.0YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MSP430F6459TPZR | MSP430F6459:MSP430F6459TPZR | U1 |
| 1 | PTS645SL50-2_LFS | SW_SPST_TAC:PTS645SL50-2 LFS | SW1 |
| 1 | SBH11-PBPC-D07-RA-BK | Con14A_RightAngle:SBH11-PBPC-D07-RA-BK | J8 |
| 1 | SP0503BAHTG | Package_TO_SOT_SMD:SOT-143 | D1 |
More from LASSITOS/LEM_LASSITOS
5- 2 layers124.5 × 68 mm

- 2 layers78 × 47 mm

- 2 layers126 × 63 mm

- 2 layers58.4 × 30.5 mm

- 2 layers13.2 × 80.8 mm

Similar boards
- 4 layers109 × 84 mm

Recline controls
Accessibilita/recline-controls
Hardware project for open source wheel chair recline control electronics
86 partsCERN-OHL-S-2.0 - 2 layers217.2 × 40 mm

- 2 layers100 × 100 mm

- 2 layers57.8 × 34 mm

DangerDonut
gavin4d/dangerDonut
Danger Donut is a work-in-progress 150 gram melty brain combat robot.
65 parts5 - 2 layers172.7 × 114.3 mm

Modules
DarekKrawczyk/MastersThesis
System to support management and control of plant cultivation
115 parts3 - 2 layers132 × 146.9 mm

Capstone Interfacing PCB
ManveerA/Motor-FOC-Visualization-Tool
Files for the project: Real-Time Hands-on Tool for Teaching Three-Phase Motor Control
86 parts3 - 2 layers130.8 × 134.4 mm

MyFirstBuck
ManveerA/Buck_Converter_PCB
Repository for Buck Converter PCB design project for ELEC-4450 Power Electronics.
50 parts1 - 4 layers131 × 89.5 mm

Mecha pico mcb
wubneh/MCTR260-pico-firmware
Raspberry Pi Pico W robot controller firmware for MCTR 260 Mechatronics Design. Dual-core BLE architecture with mecanum drive, stepper/DC motor support, and configurable motion profiles.
85 parts1MIT
Questions
How big is the MSP430 PCB?
It measures 99.1 × 61 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MSP430 use?
61 parts, built around the MSP430F6459TPZR, MIC5219-3.3YM5, MIC5219-5.0YM5-TR and LTST-C150GKT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MSP430 KiCad files?
From the LASSITOS/LEM_LASSITOS repository on GitHub, at the commit this page was made from: the board is Construction/KiCAD/MSP430_Ctrl_Board_PCB_V2/MSP430.kicad_pcb and its schematic Construction/KiCAD/CSwitch_CalCoilV2/CSwitch_CalCoilV2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MSP430 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).