2 layers101.6 × 53.3 mm
ADK MEGA 2560-REV3-append
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
100 parts
4 layers90 × 80 mm
Laser Driver v3
Laser4DIY/Laser-Driver-v223MCU-based multipurpose Laser Diode driver
- Size
- 90 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 75
- Pads
- 417
- Tracks, vias
- 775, 195
- Pours
- 26
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jun 2019
- Updated
- 5 Jun 2021
Overview
Laser Driver v3 is an open-source printed circuit board by Laser4DIY, from the Laser4DIY/Laser-Driver-v2 repository on GitHub. It is a 4-layer board of 90 × 80 mm with 102 parts on 75 nets, routed with 775 tracks and 195 vias.
It is built around the LM2734YMK, THS3091D and AD9744AR, with the OPA2354AIDDA, TC4452VAT and 74LVC2G02DC among its other parts. Its parts include 37 resistors, 24 capacitors, 16 ICs, 8 diodes and 4 connectors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
12
LM2734YMK
TSOT-23-6-40℃~+125℃@(TJ) 1 1.5mA 1A 3V~20V 550kHz 800mV~18V Adjustable Buck Buck Built-in No TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
THS3091D
SOIC-8-15V~-5V、5V~15V -40℃~+85℃ 1 10V~30V 10uA 10uV/℃ 210MHz 225mA 2nV/√Hz@10kHz 4uA 69dB 7.3V/ns 9.5mA 900uV SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
AD9744AR
SOIC-28-40℃~+85℃ 0.8LSB 11ns 14 14 2.7V~3.6V SOIC-28 Digital to Analog Converters (DAC)Analog DevicesDigital To Analog Converters (DAC)
OPA2354AIDDA
HSOP-8-EP-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 100MHz 100mA 150V/us 1pA 2 2.5V~5.5V 3pA 4.9mA 4uV/℃ 6.5nV/√Hz@1MHz 68dB 8mV Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output HSOP-8-EP Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
TC4452VAT
TO-220-5-40℃~+150℃ 1 13A 13A 140uA 30ns 32ns 4.5V~18V 44ns 44ns IGBT、MOSFET TO-220-5 Gate Drivers ROHSMicrochip TechnologyGate Drivers
74LVC2G02DC
VSSOP-8-40℃~+125℃ 1.65V~5.5V 1.7V~2V 2 2 32mA 32mA 4.3ns@5V,50pF 4uA 700mV~800mV 74LVC Series NOR Gate VSSOP-8 Logic Gates ROHSNexperiaLogic Gates
74LVC2G04DW
SOT-363-40℃~+125℃ 1.65V~5.5V 1.7V~2V 10uA 2 2 3.8ns@5V,50pF 32mA 32mA 700mV~800mV 74LVC SOT-363 Inverters ROHSDiodes IncorporatedGates And InvertersLM285D-1.2
SOIC-8-40℃~+85℃ 1.235V 20mA 60uVrms 80ppm/℃ 8uA Fixed Parallel ±1% SOIC-8 Voltage Reference ROHSonsemiVoltage Reference
SN74LVC1G08DBVR
SOT-23-5-40℃~+85℃ 1 1.65V~5.5V 1.7V、2V 100nA 2 3.4ns@5V,15pF 32mA 32mA 350mV 4V 700mV、800mV 74LVC AND Gate Local shutdown mode SOT-23-5 Logic Gates ROHSTWGMCLogic Gates
TC75S57FU(TE85L,F)
SSOP-5-40℃~+85℃ 1.8V~7V 140ns 1pA 220uA 7mV Push-pull SSOP-5 Comparators ROHSToshibaComparators
CRS08
SOD-123FL-55℃~+125℃ 1.5A 40V 500uA@40V 50A 550mV@2A Independent SOD-123FL Schottky Diodes ROHSShikuesSchottky Diodes
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
README
README.mdLASER4DIY Laser Diode Driver
Laser diode driver to be used for the Laser4DIY project, see http://www.laser4diy.org/
Note: This project is work in progress!
Design Goals
- Continous mode: up to 80A (at 2V)
- Pulse mode: up to 80A (at 2V), pulses <50µsec possible
Copyright FabLab München e.V. 2021.
This source describes Open Hardware and is licensed under the CERN-OHL-P v2
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-P v2 for applicable conditions
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C6, C7, C8, C9, C17, C19, C20, C28, C29, C30 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R8, R22 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric | R4, R5, R6 |
| 3 | 10k 1% | Resistor_SMD:R_0603_1608Metric | R17, R24, R27 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R18, R31, R36 |
| 3 | 22uF | Capacitor_SMD:C_1206_3216Metric | C3, C5, C23 |
| 3 | 22uH 1.4A | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L2, L3, L4 |
| 3 | 56K | Resistor_SMD:R_0603_1608Metric | R28, R33, R34 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R9, R35 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C15, C22 |
| 2 | 25R | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 500R | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 7460307 | Hardware:7460307 | J2, J5 |
| 2 | CRS08 | Diode_SMD:D_SOD-123F | D2, D4 |
| 2 | LM2734Y | Package_TO_SOT_SMD:TSOT-23-6 | U8, U10 |
| 2 | THS3091 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6 |
| 1 | CD1206-S01575 | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | 1 mOhms ±5% 10W | Hardware:2959_metric_15075 | R7 |
| 1 | 1000pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 102k 1% | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 10K | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1 |
| 1 | 10nF 16V | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C21 |
| 1 | 10uF 25V | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 130k | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 16.83k 1% | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 166R | Resistor_SMD:R_0603_1608Metric | R32 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R37 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 22uF 16V | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 3.84k | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 4.7uH 1.2A | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L1 |
| 1 | 422k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 50K | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 50k | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 52k3 | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 694106301002 | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J6 |
| 1 | 74LVC2G02 | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U15 |
| 1 | 74LVC2G04 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U12 |
| 1 | 750R | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | AD9744 | Package_SO:TSSOP-28_4.4x9.7mm_P0.65mm | U4 |
| 1 | ADS7883SBDBVR | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | BZX84C4V3 | Diode_SMD:D_SOT-23_ANK | D5 |
| 1 | DNM | Capacitor_SMD:C_0603_1608Metric | C18 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | IRFP4568PbF | Package_TO_SOT_THT:TO-247-3_Vertical | Q1 |
| 1 | LM2611xMF | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | LM285D-1.2 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | LM285M-ADJ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | MBR0520 | Diode_SMD:D_SOD-123 | D7 |
| 1 | OPA2354AIDDA | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 1 | PSMN0R7-25YLD | Package_TO_SOT_SMD:LFPAK56 | Q2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | SN74LVC1G08DBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U13 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | TC4452 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | TC75S57FU(TE85L,F) | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U14 |
| 1 | TL3305A | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | Teensy4.0 | Hardware:Teensy40_SMT | U2 |
Similar boards
- 4 layers101.6 × 53.3 mm
- 2 layers70 × 54 mm
UniSP bridge driver
JamesLinus/UniSP-hardware
Hardware source for UniSP - Universal high power SMPS platform
37 parts2MIT - 2 layers132 × 56 mm
Dashboard
marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module
127 partsApache-2.0 - 2 layers73 × 100 mm
EthernetCNC ver2
pekkaroi/ethernetcnc
This is my project for controlling CNC machine via ethernet port using LinuxCNC. It was originally shortly instroduced at http://pekka.eu/cnc.
99 parts15GPL-2.0 - 4 layers145 × 50.8 mm
- 4 layers83 × 19 mm
FEA BaselineRestore
anvargasl/CosmicWatch-gamma-spectroscopy-PCB
Handling versions of CosmicWatch pcb design, reusing V2 DC to DC booster and implementing new peak detection designa.
83 parts2 - 4 layers34 × 28 mm
Device
jayis1/hardware-design-lab
Full-cycle hardware device designs — each device in its own subfolder with architecture, schematics, PCB layout, and software stack
30 parts
Questions
How big is the Laser Driver v3 PCB?
It measures 90 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Laser Driver v3 use?
102 parts, built around the LM2734YMK, THS3091D, AD9744AR and OPA2354AIDDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Laser Driver v3 KiCad files?
From the Laser4DIY/Laser-Driver-v2 repository on GitHub, at the commit this page was made from: the board is Hardware/Laser-Driver-v3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Laser Driver v3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Laser4DIY before reusing the design.