4 layers90 × 80 mm
2 layers70 × 54 mm
UniSP bridge driver
JamesLinus/UniSP-hardware2Hardware source for UniSP - Universal high power SMPS platform
- Size
- 70 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 40
- Pads
- 126
- Tracks, vias
- 276, 71
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jan 2016
- Updated
- 11 Jan 2016
Overview
UniSP bridge driver is an open-source printed circuit board by JamesLinus, from the JamesLinus/UniSP-hardware repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 54 mm with 37 parts on 40 nets, routed with 276 tracks and 71 vias.
It is built around the TC4452VAT. Its parts include 14 resistors, 8 capacitors, 5 diodes, 4 transistors and 2 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
1README
UniSP-bridge-driver/README.md#UniSP-bridge_driver-v.0.2
Basic spec
TODO in next revision
- SMT transformers?
- some testing pads?
History
v0.1:
- Initial revision.
v0.2:
- Fixed some bug.
- Github init.
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitors_SMD:C_1206_HandSoldering | C1, C2, C3, C4, C7, C8 |
| 4 | 4403 | Housings_SOT-23_SOT-143_TSOT-6:SOT-23_Handsoldering | Q1, Q2, Q3, Q4 |
| 4 | 560 | Resistors_SMD:R_1206_HandSoldering | R2, R6, R8, R12 |
| 4 | ESD1 | Diodes_SMD:SMA_Handsoldering | D2, D3, D4, D5 |
| 4 | R_GATE | Resistors_SMD:R_1206_HandSoldering | R4, R7, R10, R13 |
| 2 | 10k | Resistors_SMD:R_0805_HandSoldering | R5, R11 |
| 2 | 4u7/25V | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_HandSoldering | C5, C6 |
| 2 | Coilcraft SD250-3L | bridge_driver:Coilcraft-SD250-3L | T1, T2 |
| 2 | R_PRIM | Resistors_SMD:R_1206_HandSoldering | R3, R9 |
| 2 | TC4452 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1, U2 |
| 1 | 0R | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | 1k2 0.25W | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | CONN_MAINBOARD | Pin_Headers:Pin_Header_Angled_2x16 | P1 |
| 1 | LED | LEDs:LED-0603 | D1 |
The 36 most common of 37 parts.
Similar boards
- 2 layers40 × 34 mm
- 2 layers53.9 × 23.2 mm
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
37 parts1kGPL-3.0 - 2 layers52 × 51.8 mm
Esp32-homeassistant rf bridge
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
37 parts915 - 2 layers87.8 × 59.8 mm
FreeDeck SMD 2020-02
FreeYourStream/freedeck-hardware
all the stuff you need to build your own FreeDeck
37 parts772 - 2 layers65 × 28 mm
BMS Cell Module
stuartpittaway/diyBMS
Do it yourself battery management system for Lithium ion battery packs/cells
37 parts676GPL-3.0 - 2 layers48 × 32 mm
FlatSat
Pwnsat/FlatSat
Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research
37 parts575GPL-2.0 - 2 layers38.1 × 153.7 mm
Questions
How big is the UniSP bridge driver PCB?
It measures 70 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UniSP bridge driver use?
37 parts, built around the TC4452VAT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UniSP bridge driver KiCad files?
From the JamesLinus/UniSP-hardware repository on GitHub, at the commit this page was made from: the board is UniSP-bridge-driver/UniSP-bridge_driver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the UniSP bridge driver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).