

- Size
- 65 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 45
- Pads
- 183
- Tracks, vias
- 445, 88
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Mar 2018
- Updated
- 8 May 2018
Overview
Gun is an open-source printed circuit board by laser-game, from the laser-game/gun-hw repository on GitHub. It is a 2-layer board of 65 × 40 mm with 57 parts on 45 nets, routed with 445 tracks and 88 vias.
It is built around the 74AHC1G08GW and ULN2003. Its parts include 16 capacitors, 14 resistors, 9 ICs, 6 diodes and 2 connectors. It belongs with the STM32 boards of this library.
Main components
274AHC1G08GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.7V~3.94V、4.4V~4.5V 100mV、360mV~550mV 10nA 2 2V~5.5V 500mV~1.65V 74AHC Series 9.5ns@3.3V,15pF AND Gate Overvoltage-tolerant input StandardCMOS SOT-353 Logic Gates ROHSMDDLogic GatesULN2003
SOP-161.1V@250uA,100mA 25pF 2V 30V 500mA 50uA 50uA Seven channels SOP-16 Darlington Transistor Arrays ROHSBLDarlington Transistor Arrays
README
README.mdParts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C6, C8, C9, C12, C13, C15, C16 |
| 4 | 120R | Resistor_SMD:R_1210_3225Metric | R2, R3, R5, R6 |
| 4 | 120R | Resistor_SMD:R_0805_2012Metric | R7, R8, R10, R11 |
| 4 | 1u/50V | Capacitor_SMD:C_0805_2012Metric | C7, C10, C11, C14 |
| 4 | M3 | KLIB_Mechanical:Bolt_M3 | H1, H2, H3, H4 |
| 3 | 100R | Resistor_SMD:R_0805_2012Metric | R1, R13, R14 |
| 3 | 74AHC1G08 | Package_TO_SOT_SMD:SOT-23-5 | U5, U7, U9 |
| 2 | 180R | Resistor_SMD:R_0805_2012Metric | R9, R12 |
| 2 | LTST-G563ZEGBW | KLIB_Opto:LED_RGB_5050-6 | D5, D6 |
| 2 | MCP1826S | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4, U8 |
| 2 | ULN2003 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 47u/25V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C4 |
| 1 | BANG | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | SW2 |
| 1 | FUSE | Connector_PinHeader_2.54mm:PinHeader_2x01_P2.54mm_Vertical | SW1 |
| 1 | IDC_02X05 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J2 |
| 1 | IR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D1 |
| 1 | LASER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D4 |
| 1 | LOGO | KLIB_Logo:wykys_small_skill | G*** |
| 1 | OSRB38C9BA | KLIB_Opto:OSRB8C9BA_Vertical | U1 |
| 1 | STM32F042F6Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | SWD_01X04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | UV | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D2 |
| 1 | WHITE | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | D3 |
The 54 most common of 57 parts.
Similar boards
- 2 layers110 × 85 mm

- 2 layers60.6 × 44.9 mm

A500-2Meg Chip RAM PinHeaders
LIV2/A500-2Meg-Chip-ram
An Adapter to retrofit a 2MB agnus into a 1MB Amiga 500/2000
18 parts91 - 2 layers

Diffuino selector
elixpo/elixpo_chapter
Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.
46 parts85 - 2 layers90 × 109 mm

- 4 layers106 × 29.2 mm

Batterymeter
hb020/batterymeter
Handheld Battery AC and Time Domain characterization tool on Attiny series 2
145 parts20 - 6 layers200 × 75 mm

- 4 layers29.5 × 64.5 mm

Iot esp eth ind
wayri/SPIKE
PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.
150 parts17 - 4 layers81.8 × 46.1 mm

Questions
How big is the Gun PCB?
It measures 65 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gun use?
57 parts, built around the 74AHC1G08GW and ULN2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gun KiCad files?
From the laser-game/gun-hw repository on GitHub, at the commit this page was made from: the board is hw/gun.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gun design in my own project?
Its repository states no licence, so its author keeps all rights: ask laser-game before reusing the design.