

A500-2Meg Chip RAM PinHeaders
An Adapter to retrofit a 2MB agnus into a 1MB Amiga 500/2000
- Size
- 60.6 × 44.9 mm
- Copper layers
- 2
- Thickness
- 1.62 mm
- Parts
- 18
- Nets
- 100
- Pads
- 264
- Tracks, vias
- 518, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 May 2020
- Updated
- 28 May 2026
Overview
A500-2Meg Chip RAM PinHeaders is an open-source printed circuit board by LIV2, from the LIV2/A500-2Meg-Chip-ram repository on GitHub. It is a 2-layer board of 60.6 × 44.9 mm with 18 parts on 100 nets, routed with 518 tracks and 37 vias.
It is built around the 74AHC1G08GW and SN74LVC2G157DCTR. Its parts include 7 capacitors, 6 ICs, 3 connectors and 1 resistor. It belongs with the interfaces and adapters boards of this library.
Main components
274AHC1G08GW
SOT-353-40℃~+125℃ 1 1.5V~3.85V 1.9V~2V、2.9V~3V、3.7V~3.94V、4.4V~4.5V 100mV、360mV~550mV 10nA 2 2V~5.5V 500mV~1.65V 74AHC Series 9.5ns@3.3V,15pF AND Gate Overvoltage-tolerant input StandardCMOS SOT-353 Logic Gates ROHSMDDLogic GatesSN74LVC2G157DCTR
SM8-40℃~+85℃ 1.65V~5.5V 10uA 2/1 32mA 32mA 6ns@3.3V,50pF 74LVC Multiplexer Power-off protection、Level shifting Single Supply SM8 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders
README
Kicad9/README.mdKicad Version
The project has been migrated to Kicad with some small changes
- All SMD parts (except the RAM) were moved to the bottom side.
- Added a single gate option for U4.
- VBB option was implemented as a solder jumper. This makes it possible to switch without removing the whole adapter from the motherboard.

Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C7 |
| 2 | H1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | J1, J2 |
| 1 | 150 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1Mx16 DRAM SOJ-42 | _Footprints:SOJ42 | U2 |
| 1 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 74AHC1G08 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | 74AHCT158D | Package_SO:JEITA_SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | A20 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | A20 |
| 1 | Agnus 8372 | _Footprints:Agnus 8372A | U11 |
| 1 | Agnus 8375 | _Footprints:Agnus 8375 | U1 |
| 1 | SN74LVC2G157DCTR | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U5 |
| 1 | VBB | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J3 |
Similar boards
- 2 layers30 × 15 mm

- 2 layers

Diffuino selector
elixpo/elixpo_chapter
Elixpo’s canonical collection for public build-and-release Chapters, bringing open-source software, reproducible research, hardware, and community contributions into one attributable record.
46 parts85 - 2 layers90 × 109 mm

- 4 layers106 × 29.2 mm

Batterymeter
hb020/batterymeter
Handheld Battery AC and Time Domain characterization tool on Attiny series 2
145 parts20 - 6 layers200 × 75 mm

- 4 layers29.5 × 64.5 mm

Iot esp eth ind
wayri/SPIKE
PCB-focused multiphysics simulation, from board to complete assembly: PI, SI, circuits, thermal, EM/RF and mechanical workflows, with MCAD collaboration and a roadmap toward large-scale coupled assemblies.
150 parts17 - 4 layers81.8 × 46.1 mm

- 10 layers130.9 × 63.9 mm

Questions
How big is the A500-2Meg Chip RAM PinHeaders PCB?
It measures 60.6 × 44.9 mm and has 2 copper layers, 1.62 mm thick.
What parts does the A500-2Meg Chip RAM PinHeaders use?
18 parts, built around the 74AHC1G08GW and SN74LVC2G157DCTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the A500-2Meg Chip RAM PinHeaders KiCad files?
From the LIV2/A500-2Meg-Chip-ram repository on GitHub, at the commit this page was made from: the board is Kicad9/A500-2Meg-Chip-RAM-PinHeaders.kicad_pcb and its schematic Kicad9/A500-2Meg-Chip-RAM-PinHeaders.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the A500-2Meg Chip RAM PinHeaders design in my own project?
Its repository states no licence, so its author keeps all rights: ask LIV2 before reusing the design.