
Ethersweep
Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

This is an ethernet adapter for the Hackxpansion console. It uses the WIZnet W5500 chip and the Hanrun HR911105A ethernet plug.
Ethernetxpansion is an open-source printed circuit board by Las-Vejas, from the Las-Vejas/ethernetxpansion repository on GitHub. It is a 4-layer board of 39.4 × 25.5 mm with 34 parts on 49 nets, routed with 279 tracks and 31 vias.
It is built around the W5500. Its parts include 16 capacitors, 12 resistors, 2 connectors, 1 IC and 1 crystal.
This is an ethernet adapter for the Hackxpansion console. It uses the WIZnet W5500 chip and the Hanrun HR911105A ethernet plug.
This module is a little bit longer than standard Hackxpansion module. It is a 4 layered pcb, with the two inner layers being 3V3 and GND respectively. This module took about 6.5hrs to design.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11, C12, C13, C14, C15 |
| 6 | 49.9 | Resistor_SMD:R_0402_1005Metric | R1, R2, R6, R7, R11, R12 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4, C8 |
| 2 | 30pf | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 330R | Resistor_SMD:R_0402_1005Metric | R8, R10 |
| 2 | 6.8nF | Capacitor_SMD:C_0402_1005Metric | C3, C6 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | RJ45_Hanrun_HR911105A_Horizontal | Connector_RJ:RJ45_Hanrun_HR911105A_Horizontal | J2 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | ~ | Hackxpansion:Male_Module | J1 |
The 32 most common of 34 parts.

Neumi/ethersweep
Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

tombueng/LuxDMX
Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.


OpenJBOD/rp2040
This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

CappyT/freedo
Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on

Neumi/fastLOGIC
An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

slintak/NPR70
The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.

festlv/rioctrl-hw
Hardware design for modular CNC controller
It measures 39.4 × 25.5 mm and has 4 copper layers, 1.6 mm thick.
34 parts, built around the W5500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Las-Vejas/ethernetxpansion repository on GitHub, at the commit this page was made from: the board is pcb/ethernetxpansion.kicad_pcb and its schematic pcb/ethernetxpansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Las-Vejas before reusing the design.