

AD9833FunctionGenerator
land-boards - Board Designs
- Size
- 81.8 × 167.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 45
- Pads
- 217
- Tracks, vias
- 412, 30
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jul 2012
- Updated
- 2 Dec 2024
Overview
AD9833FunctionGenerator is an open-source printed circuit board by land-boards, from the land-boards/lb-boards repository on GitHub. It is a 2-layer board of 81.8 × 167.6 mm with 57 parts on 45 nets, routed with 412 tracks and 30 vias.
It is built around the LM7171BIN, B10K and MCP42050-E/P. Its parts include 1 capacitor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3LM7171BIN
PDIP-8-15V~15V、-5V~5V -40℃~+85℃ 1 105dB 105mA 14nV/√Hz@10kHz 2.7uA 200MHz 35uV/℃ 3mV 4.1V/ns 6.5mA 6uA PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierB10K
RES-TH_RK10J12E002LTH-3P SMT ROHSJLCPCB AssemblyUncategorisedMCP42050-E/P
PDIP-14-40℃~+125℃ 125Ω 2 2.7V~5.5V 256 280MHz 50kΩ 800ppm/℃ Linear SPI Soft reset、Power-on reset、Mute function PDIP-14 Digital Potentiometers ROHSMicrochip TechnologyDigital Potentiometers
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_FUNC1, R_HIOFF1, R_LOFF1, R_MIX1, R_MIX2, R_MIX3, R_MODE1, R_RANGE1, ROFF1, ROFF2 |
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C_BUFFBP2, C_BUFFBP3, C_MIXBP2, C_MIXBP3, C_POTBP1, C2, CPWRBP1, CPWRBP2 |
| 4 | 2.2uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C_BUFFBP1, C_BUFFBP4, C_MIXBP1, C_MIXBP4 |
| 3 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J_AUX2MAIN2, J_MAIN2AUX1, J_PWR1 |
| 3 | SW_SPST | Button_Switch_THT:SW_PUSH_6mm | SW_FUNC1, SW_MODE1, SW_RANGE1 |
| 2 | 100K | Potentiometer_THT:Potentiometer_Piher_PT-6-V_Vertical | RV_LOWOFF1, RV_UPOFF1 |
| 2 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_PHASE1, R_VEL1 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RF1, RG1 |
| 2 | 2pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CF1, CF2 |
| 2 | B10K | PTH901:PTH901 | RV_AMP1, RV_FREQ1 |
| 2 | LM7171 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U_BUFF1, U_MIX1 |
| 1 | 220nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 470pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C_GAIN1 |
| 1 | 600R 1% | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R_ISO1 |
| 1 | 8K2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | RF2 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x02 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J_OUT1 |
| 1 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J_OLEDCONNECTOR1 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J_AD9833 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | MCP42050 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U_POT1 |
| 1 | R_POT_Dual_Separate | PTH901:PTH901 | RV_TIME1 |
| 1 | SW_DPDT_x2 | ALPS_SPUN191600:ALPS_SPUN191600 | SW_PWR1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP_OFF1 |
The 53 most common of 57 parts.
More from land-boards/lb-boards
12- 2 layers160 × 112 mm

- 2 layers213.9 × 96.4 mm

- 2 layers30 × 50 mm

- 2 layers95 × 95 mm

- 2 layers95 × 95 mm

- 2 layers

- 2 layers95 × 95 mm

- 2 layers

- 2 layers170 × 170 mm

- 2 layers95 × 48 mm

- 2 layers112.6 × 128.3 mm

- 2 layers95 × 48 mm

Similar boards
- 4 layers101.6 × 101.6 mm

Digital Board Rev 1
jer-lil/tremolo-hardware
This is the hardware (PCB, MCAD) design for a tremolo pedal for guitar (or bass, synth, tonewheel organ, whatever you like). The firmware is here: https://github.com/jer-lil/tremolo-firmware/tree/main
135 parts - 2 layers

- 2 layers84.1 × 47.3 mm

- 4 layers170 × 100 mm

- 2 layers48.3 × 38.6 mm

SAW WAVEAMP
ShivanshVij/UWNRG-Amplifier
PCB Design in KiCAD for the UWNRG's SAW Team's Sine Wave Amplifier
9 parts1 - 4 layers108.5 × 107.7 mm

Pid
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
428 parts - 2 layers139.7 × 44.5 mm

- 4 layers160 × 100 mm

Eurocard HV piezo driver
dyknapp/-ion-optics-hv
Open Eurocard-HV-piezo-driver.kicadpro with KiCad 10.0.7 or a compatible later version. The project contains six schematic sheets and a four-layer PCB.
172 parts
Questions
How big is the AD9833FunctionGenerator PCB?
It measures 81.8 × 167.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the AD9833FunctionGenerator use?
57 parts, built around the LM7171BIN, B10K and MCP42050-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AD9833FunctionGenerator KiCad files?
From the land-boards/lb-boards repository on GitHub, at the commit this page was made from: the board is HamRadio/VFO-005/AD9833/AD9833FunctionGenerator/Hardware/AD9833FunctionGenerator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AD9833FunctionGenerator design in my own project?
Its repository states no licence, so its author keeps all rights: ask land-boards before reusing the design.