

Receiver
- Size
- 139.7 × 44.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 31
- Pads
- 138
- Tracks, vias
- 221, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 26 Mar 2016
- Updated
- 23 Aug 2017
Overview
Receiver is an open-source printed circuit board by benlorenzetti, from the benlorenzetti/UC_the_Fish_PCBs repository on GitHub. It is a 2-layer board of 139.7 × 44.5 mm with 52 parts on 31 nets, routed with 221 tracks and 0 vias.
It is built around the LM7171BIN and RB1-125BAG1A. Its parts include 14 capacitors, 10 resistors, 9 transistors, 5 ICs and 2 inductors.
Main components
2LM7171BIN
PDIP-8-15V~15V、-5V~5V -40℃~+85℃ 1 105dB 105mA 14nV/√Hz@10kHz 2.7uA 200MHz 35uV/℃ 3mV 4.1V/ns 6.5mA 6uA PDIP-8 Operational Amplifier ROHSTexas InstrumentsOperational AmplifierRB1-125BAG1A
弯插0℃~+70℃ 1 Gold Phosphor bronze RJ45 Jack Right Angle Shielded With LED 弯插 Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSWIZNETEthernet Connectors / Modular Connectors (RJ45 RJ11)
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 2N3904 | UC_the_Fish_Components:TO-92 | Q2, Q3, Q4, Q5, Q6, Q8 |
| 5 | 100 | UC_the_Fish_Components:400Mil_Passive | R_dif1, R6, R10, R12, Rc1 |
| 4 | 0.1u | UC_the_Fish_Components:200Mil_Passive | C8, C10, C12, C14 |
| 3 | PN2369A | UC_the_Fish_Components:TO-92 | Q1, Q7, Q9 |
| 2 | 1k | UC_the_Fish_Components:400Mil_Passive | R9, R11 |
| 2 | 2pF | UC_the_Fish_Components:100Mil_Passive | C9, C13 |
| 2 | 330nF | UC_the_Fish_Components:200Mil_Passive | C7, C11 |
| 2 | 47uF | UC_the_Fish_Components:100Mil_Passive | C4, C6 |
| 2 | 9V | UC_the_Fish_Components:point1_pitch_Header | BT1, BT2 |
| 2 | LM7171 | UC_the_Fish_Components:8_Pin_Socket | U2, U3 |
| 2 | Physical_Mount | UC_the_Fish_Components:Mounting_Via | U4, U5 |
| 1 | 0.1 uH | UC_the_Fish_Components:400Mil_Passive | L5 |
| 1 | 0.1uF | UC_the_Fish_Components:200Mil_Passive | C3 |
| 1 | 0.33uF | UC_the_Fish_Components:100Mil_Passive | C2 |
| 1 | 1.7k | UC_the_Fish_Components:400Mil_Passive | R0 |
| 1 | 10 uH | UC_the_Fish_Components:400Mil_Passive | L1 |
| 1 | 10.6 | UC_the_Fish_Components:400Mil_Passive | R3 |
| 1 | 100 uF | UC_the_Fish_Components:200Mil_Passive | C_E7 |
| 1 | 100nF | UC_the_Fish_Components:200Mil_Passive | C5 |
| 1 | 106 | UC_the_Fish_Components:400Mil_Passive | R4 |
| 1 | 2.7k | UC_the_Fish_Components:400Mil_Passive | R5 |
| 1 | 25 | UC_the_Fish_Components:400Mil_Passive | R_E6 |
| 1 | 2k | UC_the_Fish_Components:400Mil_Passive | R8 |
| 1 | 342 | UC_the_Fish_Components:400Mil_Passive | R_E5 |
| 1 | 47 uF | UC_the_Fish_Components:100Mil_Passive | C1 |
| 1 | 667 | UC_the_Fish_Components:400Mil_Passive | R7 |
| 1 | 723 | UC_the_Fish_Components:400Mil_Passive | R1 |
| 1 | 884 | UC_the_Fish_Components:400Mil_Passive | R2 |
| 1 | MC7805CTG | UC_the_Fish_Components:TO-220 | U1 |
| 1 | MTD3010PM | UC_the_Fish_Components:MTD3010PM | D1 |
| 1 | RB1-125BAG1A | UC_the_Fish_Components:RB1-125BAG1A | J1 |
More from benlorenzetti/UC_the_Fish_PCBs
1- 2 layers76.2 × 52.1 mm

Similar boards
- 2 layers52 × 90 mm

- 2 layers84.1 × 47.3 mm

- 2 layers63.5 × 45.7 mm

Fathom x
bluerobotics/fathom-x
Ethernet capable tether interface board for the Fathom tether.
25 parts5MIT - 4 layers170 × 100 mm

- 2 layers

- 2 layers102.8 × 40.5 mm

Stm32-led controller
Joseph-Ladino/stm32-led-controller
Custom STM32 based led strip controller targeting WS2815. Features include Ethernet, WiFi, USB-C (USB 2.0) and a load switch for disconnecting the strip's power
67 parts2 - 2 layers48.3 × 38.6 mm

SAW WAVEAMP
ShivanshVij/UWNRG-Amplifier
PCB Design in KiCAD for the UWNRG's SAW Team's Sine Wave Amplifier
9 parts1 - 4 layers108.5 × 107.7 mm

Pid
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
428 parts
Questions
How big is the Receiver PCB?
It measures 139.7 × 44.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Receiver use?
52 parts, built around the LM7171BIN and RB1-125BAG1A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver KiCad files?
From the benlorenzetti/UC_the_Fish_PCBs repository on GitHub, at the commit this page was made from: the board is KiCad/Receiver_Project/receiver.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver design in my own project?
Its repository states no licence, so its author keeps all rights: ask benlorenzetti before reusing the design.