Skip to the content
12345678

LM7171BIN

Texas InstrumentsExtended

-15V~15V、-5V~5V -40℃~+85℃ 1 105dB 105mA 14nV/√Hz@10kHz 2.7uA 200MHz 35uV/℃ 3mV 4.1V/ns 6.5mA 6uA PDIP-8 Operational Amplifier ROHS

Part id
ti/LM7171BIN
Category
Operational Amplifier
Package
PDIP-8
Pins
8
In stock
10 at JLCPCB (C206481)
Used on
11 open-source boards

Overview

The LM7171BIN is an operational Amplifier made by Texas Instruments in a PDIP-8 package with 8 pins. -15V~15V、-5V~5V -40℃~+85℃ 1 105dB 105mA 14nV/√Hz@10kHz 2.7uA 200MHz 35uV/℃ 3mV 4.1V/ns 6.5mA 6uA PDIP-8 Operational Amplifier ROHS.

PCBKit's library has its KiCad symbol (Amplifier_Operational:LM7171xIN, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 10 are in stock at JLCPCB (part C206481). 11 open-source boards in 9 repositories on GitHub use it.

Symbol

2-3+4V-67V+
Amplifier_Operational:LM7171xINFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the LM7171BIN
PinNameType
1NCNot connected
2-Input
3+Input
4V-Power in
5NCNot connected
6—Output
7V+Power in
8NCNot connected

Open-source boards using it

11See all 11
  • 2 layers84.1 × 47.3 mmFinalPCB, the printed circuit board in 3D

    FinalPCB

    daumemo/DIY-Signal-Generator

    DIY portable Wi-Fi enabled signal generator

    143 parts45
  • 4 layers170 × 100 mmIo master, the printed circuit board in 3D

    Io master

    csinko/io-master

    Dominate the I/O!

    674 parts4MIT
  • 2 layers48.3 × 38.6 mmSAW WAVEAMP, the printed circuit board in 3D

    SAW WAVEAMP

    ShivanshVij/UWNRG-Amplifier

    PCB Design in KiCAD for the UWNRG's SAW Team's Sine Wave Amplifier

    9 parts1
  • 4 layers108.5 × 107.7 mmPid, the printed circuit board in 3D

    Pid

    bec5-group/pid-controller

    Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…

    428 parts
  • 2 layers139.7 × 44.5 mmReceiver, the printed circuit board in 3D

    Receiver

    benlorenzetti/UC_the_Fish_PCBs

    52 parts
  • 4 layers160 × 100 mmEurocard HV piezo driver, the printed circuit board in 3D

    Eurocard HV piezo driver

    dyknapp/-ion-optics-hv

    Open Eurocard-HV-piezo-driver.kicadpro with KiCad 10.0.7 or a compatible later version. The project contains six schematic sheets and a four-layer PCB.

    172 parts
  • 4 layersSpectroamp1, the printed circuit board in 3D

    Spectroamp1

    m-labs/spectropak

    A universal controller for quadrupole mass spectrometers (RGAs)

    68 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LM7171BIN?

Yes. The symbol is Amplifier_Operational:LM7171xIN and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LM7171BIN?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the LM7171BIN datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LM7171BIN?

JLCPCB lists it as part C206481, with 10 in stock; the sellers' links on this page open their listings.

What can replace the LM7171BIN?

Parts like it in the library: the OPA551PA by Texas Instruments, the LM6171BIN by Texas Instruments, the L272M-ON by onsemi and the OPA552PA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LM7171BIN?

11 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.